From: Firas Kraiem <fkraiem@free.fr>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] Hardware monitoring on Asus A6JM laptop
Date: Fri, 03 Aug 2007 20:53:51 +0000 [thread overview]
Message-ID: <46B395DF.30504@free.fr> (raw)
Greetings
A while ago, I posted a message to the list about getting hardware
monitoring to work on my Asus laptop :
http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018031.html
Due to various issues, I haven't been able to deal with the issue
further. However, if someone could point me to the right direction about
re-enabling my SMBus, it would be much appreciated. The output of lspci
-vn follows.
Regards,
Firas
00:00.0 0600: 8086:27a0 (rev 03)
Subsystem: 1043:1237
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:27a1 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f9f00000-fdffffff
Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
Capabilities: [88] Subsystem: 8086:27a1
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 1043:1123
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at febfc000 (64-bit, non-prefetchable) [size\x16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x02, subordinate\x02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe000000-fe0fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [90] Subsystem: 8086:27d0
Capabilities: [a0] Power Management version 2
00:1c.3 0604: 8086:27d6 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x03, subordinate\x03, sec-latency=0
Memory behind bridge: fe100000-fe1fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [90] Subsystem: 8086:27d6
Capabilities: [a0] Power Management version 2
00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at ec00 [size2]
00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e880 [size2]
00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e800 [size2]
00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at e480 [size2]
00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary\0, secondary\x04, subordinate\b, sec-latency2
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe200000-feafffff
Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
Capabilities: [50] Subsystem: 8086:2448
00:1f.0 0601: 8086:27b9 (rev 02)
Subsystem: 8086:27b9
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.1 0101: 8086:27df (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size\x16]
01:00.0 0300: 10de:0398 (rev a1) (prog-if 00 [VGA])
Subsystem: 1043:1232
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fd000000 (32-bit, non-prefetchable) [size\x16M]
Memory at c0000000 (64-bit, prefetchable) [size%6M]
Memory at fc000000 (64-bit, non-prefetchable) [size\x16M]
I/O ports at bc00 [size\x128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size\x128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [78] Express Endpoint IRQ 0
02:00.0 0200: 10ec:8168 (rev 01)
Subsystem: 1043:11f5
Flags: bus master, fast devsel, latency 0, IRQ 16
I/O ports at c800 [size%6]
Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe0e0000 [disabled] [sizedK]
Capabilities: [40] Power Management version 2
Capabilities: [48] Vital Product Data
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable-
Capabilities: [60] Express Endpoint IRQ 0
Capabilities: [84] Vendor Specific Information
03:00.0 0280: 8086:4222 (rev 02)
Subsystem: 8086:1001
Flags: bus master, fast devsel, latency 0, IRQ 5
Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
04:01.0 0607: 1180:0476 (rev b3)
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 168, IRQ 18
Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary\x04, secondary\x05, subordinate\b, sec-latency\x176
Memory window 0: 88000000-8bfff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 0000d000-0000d0ff
I/O window 1: 0000d400-0000d4ff
16-bit legacy interface ports at 0001
04:01.1 0c00: 1180:0552 (rev 08) (prog-if 10 [OHCI])
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
04:01.2 0805: 1180:0822 (rev 17)
Subsystem: 1043:1237
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at feaff400 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
04:01.3 0880: 1180:0592 (rev 08)
Subsystem: 1043:1237
Flags: medium devsel, IRQ 5
Memory at feaff000 (32-bit, non-prefetchable) [size%6]
Capabilities: [80] Power Management version 2
--
() ascii ribbon campaign - against html e-mail
/\ www.asciiribbon.org - against proprietary attachments
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2007-08-03 20:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-03 20:53 Firas Kraiem [this message]
2007-08-03 21:42 ` [lm-sensors] Hardware monitoring on Asus A6JM laptop Juerg Haefliger
2007-08-03 22:05 ` Firas Kraiem
2007-08-04 3:32 ` Juerg Haefliger
2007-08-04 16:24 ` Firas Kraiem
2007-08-04 16:44 ` Juerg Haefliger
2007-08-04 16:52 ` Firas Kraiem
2007-08-04 20:09 ` Rudolf Marek
2007-08-05 8:18 ` christophe
2007-08-05 8:41 ` Rudolf Marek
2007-08-05 8:43 ` Rudolf Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46B395DF.30504@free.fr \
--to=fkraiem@free.fr \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.