From: Pierre-Yves Paulus <py@idlum.be>
To: BlueZ development <bluez-devel@lists.sourceforge.net>
Subject: Re: [Bluez-devel] "Invalid CID in request"
Date: Mon, 06 Aug 2007 10:07:13 +0200 [thread overview]
Message-ID: <46B6D6B1.5030007@idlum.be> (raw)
In-Reply-To: <1186386755.20129.1.camel@violet>
[-- Attachment #1: Type: text/plain, Size: 337 bytes --]
Hi Marcel,
> what kernel are you using? And I need the full trace from the HCI create
> connection to the HCI disconnect.
The kernel used is 2.6.21-2-486 (from debian).
The file I attached to my last e-mail (re-attached to this one) contains
the output of "hcidump -XV", are you requesting something else?
Best Regards,
Pierre-Yves
[-- Attachment #2: hci.log --]
[-- Type: text/x-log, Size: 5029 bytes --]
2007-08-05 09:41:17,627 hci2 < HCI Command: Create Connection (0x01|0x0005) plen 13
2007-08-05 09:41:17,659 hci2 bdaddr 00:16:4E:D6:5D:1A ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
2007-08-05 09:41:17,660 hci2 Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2007-08-05 09:41:17,662 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:17,663 hci2 Create Connection (0x01|0x0005) status 0x00 ncmd 1
2007-08-05 09:41:20,678 hci2 > HCI Event: Connect Complete (0x03) plen 11
2007-08-05 09:41:20,680 hci2 status 0x00 handle 11 bdaddr 00:16:4E:D6:5D:1A type ACL encrypt 0x00
2007-08-05 09:41:20,681 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,682 hci2 L2CAP(s): Connect req: psm 1 scid 0x0040
2007-08-05 09:41:20,683 hci2 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
2007-08-05 09:41:20,684 hci2 handle 11
2007-08-05 09:41:20,685 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,686 hci2 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
2007-08-05 09:41:20,687 hci2 < HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
2007-08-05 09:41:20,688 hci2 handle 11 policy 0x0f
2007-08-05 09:41:20,689 hci2 Link policy: RSWITCH HOLD SNIFF PARK
2007-08-05 09:41:20,691 hci2 > HCI Event: Read Remote Supported Features (0x0b) plen 11
2007-08-05 09:41:20,692 hci2 status 0x00 handle 11
2007-08-05 09:41:20,693 hci2 Features: 0xbf 0xee 0x0f 0x46 0x98 0x19 0x00 0x00
2007-08-05 09:41:20,694 hci2 > HCI Event: Command Complete (0x0e) plen 6
2007-08-05 09:41:20,696 hci2 Write Link Policy Settings (0x02|0x000d) ncmd 1
2007-08-05 09:41:20,696 hci2 status 0x00 handle 11
2007-08-05 09:41:20,697 hci2 > HCI Event: Max Slots Change (0x1b) plen 3
2007-08-05 09:41:20,699 hci2 handle 11 slots 5
2007-08-05 09:41:20,700 hci2 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
2007-08-05 09:41:20,701 hci2 bdaddr 00:16:4E:D6:5D:1A mode 2 clkoffset 0x0000
2007-08-05 09:41:20,702 hci2 > HCI Event: Command Status (0x0f) plen 4
2007-08-05 09:41:20,703 hci2 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2007-08-05 09:41:20,800 hci2 > ACL data: handle 11 flags 0x02 dlen 10
2007-08-05 09:41:20,801 hci2 L2CAP(s): Info req: type 2
2007-08-05 09:41:20,802 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:20,803 hci2 L2CAP(s): Info rsp: type 2 result 1
2007-08-05 09:41:20,804 hci2 Not supported
2007-08-05 09:41:20,966 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:20,967 hci2 handle 11 packets 2
2007-08-05 09:41:28,013 hci2 > ACL data: handle 11 flags 0x02 dlen 16
2007-08-05 09:41:28,031 hci2 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
2007-08-05 09:41:28,032 hci2 Connection successful
2007-08-05 09:41:28,033 hci2 < ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,034 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,035 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,036 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,037 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,046 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,047 hci2 Success
2007-08-05 09:41:28,048 hci2 MTU 672
2007-08-05 09:41:28,049 hci2 > ACL data: handle 11 flags 0x02 dlen 12
2007-08-05 09:41:28,050 hci2 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
2007-08-05 09:41:28,051 hci2 < ACL data: handle 11 flags 0x02 dlen 18
2007-08-05 09:41:28,052 hci2 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
2007-08-05 09:41:28,053 hci2 Success
2007-08-05 09:41:28,054 hci2 MTU 672
2007-08-05 09:41:28,055 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,056 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0040 scid 0x0000
2007-08-05 09:41:28,057 hci2 Invalid CID in request
2007-08-05 09:41:28,059 hci2 > HCI Event: Remote Name Req Complete (0x07) plen 255
2007-08-05 09:41:28,060 hci2 status 0x00 bdaddr 00:16:4E:D6:5D:1A name 'Nokia N70'
2007-08-05 09:41:28,216 hci2 > HCI Event: Number of Completed Packets (0x13) plen 5
2007-08-05 09:41:28,217 hci2 handle 11 packets 3
2007-08-05 09:41:28,301 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:28,303 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:28,304 hci2 Invalid CID in request
2007-08-05 09:41:29,291 hci2 > ACL data: handle 11 flags 0x02 dlen 14
2007-08-05 09:41:29,293 hci2 L2CAP(s): Command rej: reason 2 dcid 0x0000 scid 0x0040
2007-08-05 09:41:29,294 hci2 Invalid CID in request
2007-08-05 09:41:32,094 hci2 > HCI Event: Disconn Complete (0x05) plen 4
2007-08-05 09:41:32,095 hci2 status 0x00 handle 11 reason 0x13
2007-08-05 09:41:32,096 hci2 Reason: Remote User Terminated Connection
[-- Attachment #3: Type: text/plain, Size: 315 bytes --]
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
[-- Attachment #4: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next prev parent reply other threads:[~2007-08-06 8:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-06 7:21 [Bluez-devel] "Invalid CID in request" Pierre-Yves Paulus
2007-08-06 7:52 ` Marcel Holtmann
2007-08-06 8:07 ` Pierre-Yves Paulus [this message]
2007-08-06 8:14 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46B6D6B1.5030007@idlum.be \
--to=py@idlum.be \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.