From: Maciek Rutecki <maciej.rutecki@gmail.com>
To: Linux-kernel <linux-kernel@vger.kernel.org>,
htejun@gmail.com, linux-ide@vger.kernel.org,
linux-acpi@vger.kernel.org, rjw@sisk.pl
Subject: SATA error while resume
Date: Sun, 19 Aug 2007 11:12:57 +0200 [thread overview]
Message-ID: <46C80999.1060700@gmail.com> (raw)
Kernel: 2.6.23-rc2 witch patches [1], but older and stable versions also
affected.
[1] http://www.ussg.iu.edu/hypermail/linux/kernel/0708.0/2655.html
+ipw3945 and truecrypt.
Sometimes (one in ten, or rarely) I have this error while system resume
from suspend to disk:
=================
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Loading image data pages (117687 pages)
... \b\b\b\b 0%\b\b\b\b 1%\b\b\b\b 2%\b\b\b\b 3%\b\b\b\b 4%\b\b\b\b 5%\b\b\b\b 6%\b\b\b\b 7%\b\b\b\b
8%\b\b\b\b 9%\b\b\b\b 10%\b\b\b\b 11%\b\b\b\b 12%\b\b\b\b 13%\b\b\b\b 14%\b\b\b\b 15%\b\b\b\b 16%\b\b\b\b 17%\b\b\b\b
18%\b\b\b\b 19%\b\b\b\b 20%<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 f3 0b 6c
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate
failed
end_request: I/O error, dev sda, sector 99814252
Read-error on swap-device (8:0:99814256)
Read-error on swap-device (8:0:99814264)
Read-error on swap-device (8:0:99814272)
...
Read-error on swap-device (8:0:99815184)
ata1: EH complete
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
Read 470748 kbytes in 30.97 seconds (15.20 MB/s)
PM: Restore failed, recovering.
Restarting tasks ... done.
swsusp: Basic memory bitmaps freed
=================
Then system continue booting without resume.
I use smartctl and check disk 2 times and run fsck/mkswap -c and I have
no erros:
=================
rutek:/home/maciek/kernel.org/libata_error# smartctl -A /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always
- 28879
2 Throughput_Performance 0x0005 100 100 030 Pre-fail
Offline - 20381999
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always
- 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always
- 1599
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always
- 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always
- 3713
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail
Offline - 0
9 Power_On_Seconds 0x0032 096 096 000 Old_age Always
- 0h+41m+39s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1354
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 65
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always
- 2776
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 33 (Lifetime Min/Max 15/46)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 344
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 444268544
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always
- 22830
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always
- 2632796799455
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always
- 0
=================
Dmesg and config:
http://www.unixy.pl/maciek/download/kernel/libata_error/
Regards
--
Maciej Rutecki
http://www.maciek.unixy.pl
next reply other threads:[~2007-08-19 9:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-19 9:12 Maciek Rutecki [this message]
2007-08-19 10:45 ` SATA error while resume Tejun Heo
2007-08-19 14:25 ` Mark Lord
2007-08-19 15:16 ` Maciek Rutecki
2007-08-19 15:49 ` Tejun Heo
2007-08-19 15:49 ` Tejun Heo
2007-08-19 16:25 ` Maciek Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46C80999.1060700@gmail.com \
--to=maciej.rutecki@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.