From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andy Furniss Date: Wed, 22 Aug 2007 23:24:03 +0000 Subject: Re: [LARTC] How to see the sfq hash table ? Message-Id: <46CCC593.5090705@andyfurniss.entadsl.com> List-Id: References: <46C45125.4030602@boreham.org> In-Reply-To: <46C45125.4030602@boreham.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org David Boreham wrote: > I'm grappling with a problem that looks like sfq is not working > (packets don't get fairly queued, they appear to be always > sent FIFO). My configuration appears to be correct. > The machine is running quite an old kernel and if I could > convince myself that the sfq code it has is just broken, I'd > spend the time to upgrade it. Is there any way to inspect or > dump the sfq hash table on a running machine ? I don't think so - I would use tcpdump, if you use perturb don't set it too low as it causes packet reordering. There is currently work going on to merge sfq/esfq and the hash will be jhash so should be better than the current one. Andy. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc