Re: Should sata_mv work with Highpoint RocketRAID 2300?

[Karim 'Kasi Mir' Senoucci <ks@double-you.de>]

Alan Cox schrieb:
>> in the sata_mv source. Should I add something like:
>>
>>         { PCI_VDEVICE(TTI, 0x2300), chip_604x },
>>
>> Yes
>>     
Just to not leave this thread hanging in the mail archives: this didn't 
work for me. With the above patch, the controller is detected, but the 
system hangs upon inclusion of the sata_mv driver. dmess shows:

[   32.240000] sata_mv 0000:06:00.0: version 0.81
[   32.272000] ACPI: PCI Interrupt 0000:06:00.0[A] -> Done.Link [APC6] 
->GSI 16 (level, low) -> IRQ 17
[   32.336000] sata_mv 0000:06:00.0: Applying B2 workarounds to unknown rev
[   32.388000] sata_mv 0000:06:00.0: 32 slots 4 ports SCSI mode IRQ via INTx
[   32.432000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[   32.464000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[   32.496000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[   32.528000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[   32.560000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000
[   32.592000] sata_mv: PCI ERROR; PCI IRQ cause=0x00000000

and many many more PCI ERRORS until I reboot the system. So, I guess 
that particular Highpoint controller does not work yet with sata_mv.

Thanks very much for your efforts, anyway.

Greetings, Karim.