From: Tilman Schmidt <tilman@imap.cc>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Thomas Gleixner <tglx@linutronix.de>,
john stultz <johnstul@us.ibm.com>, Andi Kleen <ak@suse.de>,
Len Brown <lenb@kernel.org>,
linux-acpi@vger.kernel.org, Dave Jones <davej@codemonkey.org.uk>,
Thomas Renninger <trenn@suse.de>,
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Subject: Re: 2.6.23-rc3-mm1
Date: Sat, 25 Aug 2007 02:47:59 +0200 [thread overview]
Message-ID: <46CF7C3F.10707@imap.cc> (raw)
In-Reply-To: <20070824170702.a2c51084.akpm@linux-foundation.org>
[-- Attachment #1.1: Type: text/plain, Size: 2248 bytes --]
Am 25.08.2007 02:07 schrieb Andrew Morton:
> On Sat, 25 Aug 2007 01:27:25 +0200
> Tilman Schmidt <tilman@imap.cc> wrote:
>
>> Am 22.08.2007 11:06 schrieb Andrew Morton:
>>> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.23-rc3/2.6.23-rc3-mm1/
>> After applying Matthew Wilcox' patch to include/linux/isa.h
>
> which patch is that?
The one allowing drivers/scsi/advansys.c to compile with CONFIG_ISA=n:
Date: Wed, 22 Aug 2007 10:28:02 -0600
From: Matthew Wilcox <matthew@wil.cx>
Subject: Re: drivers/scsi/advansys.c - ld error ( Re: 2.6.23-rc3-mm1 )
Message-ID: <20070822162802.GJ9163@parisc-linux.org>
When CONFIG_ISA is disabled, the isa_driver support will not be compiled
in. Define stubs so that we don't get link-time errors.
>> this compiles
>> and boots on my Intel/openSUSE 10.2 test machine but throws out the
>> following messages I don't remember ever seeing with other kernels:
>>
>> - on console early during boot, also in SuSE's /var/log/boot.msg:
>>
>> your system time is not correct:
>> Wed Jul 13 13:15:31 UTC 1910
>> setting system time to:
>> Tue Jul 24 00:00:00 UTC 2007
>
> What architecture?
i386. The machine is a Pentium D 940 which would be x86_64 capable,
but I'm still running 32 bit kernels on it.
> if x86_64 then perhaps something went wrong with the old x86_64 dynticks
> leftovers which were in rc3-mm1. I've just merged a shiny fresh new series
> so perhaps things there got fixed. Please retest next -mm.
Will do that anyway.
> Perhaps it would be helpful if you could do a
>
> diff -u dmesg-2.6.23-rc3 dmesg-2.6.26-rc3-mm1
I hope the attached helps. I created it by taking /var/log/boot.msg
of the two systems, removing everything after "Kernel logging stopped",
editing out the printk timestamps and then running diff -u on them,
so it should be more or less the dmesg diff. I did not edit out any
of the differences because I'm lazy. (And also because I wasn't so sure
what would or wouldn't be interesting for you.)
--
Tilman Schmidt E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)
[-- Attachment #1.2: bootmsg.diff --]
[-- Type: text/plain, Size: 25448 bytes --]
--- /tmp/bootmsg-2.6.23-rc3 2007-08-25 02:25:54.000000000 +0200
+++ /tmp/bootmsg-2.6.23-rc3-mm1 2007-08-25 02:26:08.000000000 +0200
@@ -1,10 +1,10 @@
-Inspecting /boot/System.map-2.6.23-rc3-testing
-Loaded 27522 symbols from /boot/System.map-2.6.23-rc3-testing.
+Inspecting /boot/System.map-2.6.23-rc3-mm1-testing
+Loaded 28663 symbols from /boot/System.map-2.6.23-rc3-mm1-testing.
Symbols match kernel version 2.6.23.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
-<5>Linux version 2.6.23-rc3-testing (ts@xenon) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Tue Aug 14 15:27:26 CEST 2007
+<5>Linux version 2.6.23-rc3-mm1-testing (ts@xenon) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT Thu Aug 23 00:02:51 CEST 2007
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
<4> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
@@ -25,6 +25,7 @@
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000fe200
<7>Entering add_active_range(0, 0, 255744) 0 entries of 256 used
+<7>sizeof(struct page) = 56
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
@@ -33,6 +34,7 @@
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 255744
<7>On node 0 totalpages: 255744
+<7>Node 0 memmap at 0xc1000000 size 14336000 first pfn 0xc1000000
<7> DMA zone: 56 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4040 pages, LIFO batch:0
@@ -82,16 +84,16 @@
<4>swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
<4>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
<4>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
-<4>Built 1 zonelists in Zone order. Total pages: 252248
+<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252248
<5>Kernel command line: root=/dev/system/root video=matroxfb:vesa:0x31b resume=/dev/system/swap splash=verbose
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
-<4>CPU 0 irqstacks, hard=c0451000 soft=c0449000
+<4>CPU 0 irqstacks, hard=c04d0000 soft=c04c8000
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
-<4>Detected 3197.068 MHz processor.
+<4>Detected 3196.982 MHz processor.
<4>Console: colour VGA+ 80x25
<6>console [tty0] enabled
<4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
@@ -188,21 +190,21 @@
<4>---------------------------------
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-<6>Memory: 993044k/1022976k available (2040k kernel code, 28100k reserved, 1042k data, 252k init, 104484k highmem)
+<6>Memory: 992396k/1022976k available (2110k kernel code, 28776k reserved, 1467k data, 260k init, 104484k highmem)
<4>virtual kernel memory layout:
<4> fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
<4> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
-<4> .init : 0xc0407000 - 0xc0446000 ( 252 kB)
-<4> .data : 0xc02fe179 - 0xc0402ce4 (1042 kB)
-<4> .text : 0xc0100000 - 0xc02fe179 (2040 kB)
+<4> .init : 0xc0483000 - 0xc04c4000 ( 260 kB)
+<4> .data : 0xc030f81f - 0xc047e4c4 (1467 kB)
+<4> .text : 0xc0100000 - 0xc030f81f (2110 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
-<6>SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
-<6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
-<6>hpet0: 3 64-bit timers, 14318180 Hz
-<4>Calibrating delay using timer specific routine.. 6399.65 BogoMIPS (lpj=3199825)
-<6>Security Framework v1.0.0 initialized
+<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=16, CPUs=2, Nodes=1
+<4>Calibrating delay using timer specific routine.. 6399.03 BogoMIPS (lpj=3199517)
+<6>kswapd reclaim order set to 3
+<6>Security Framework initialized
+<6>Capability LSM initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 00000000
<4>monitor/mwait feature present.
@@ -223,9 +225,9 @@
<4>CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
<4>lockdep: not fixing up alternatives.
<4>Booting processor 1/1 eip 3000
-<4>CPU 1 irqstacks, hard=c0452000 soft=c044a000
+<4>CPU 1 irqstacks, hard=c04d1000 soft=c04c9000
<6>Initializing CPU#1
-<4>Calibrating delay using timer specific routine.. 6393.68 BogoMIPS (lpj=3196844)
+<4>Calibrating delay using timer specific routine.. 6392.76 BogoMIPS (lpj=3196383)
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e4bd 00000000 00000001 00000000
<4>monitor/mwait feature present.
<6>CPU: Trace cache: 12K uops, L1 D cache: 16K
@@ -238,23 +240,27 @@
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
<6>CPU1: Thermal monitoring enabled
<4>CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
-<6>Total of 2 processors activated (12793.33 BogoMIPS).
+<6>Total of 2 processors activated (12791.80 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
-<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
+<6>checking TSC synchronization [CPU#0 -> CPU#1]:
+<4>Measured 32 cycles TSC warp between CPUs, turning off TSC clock.
+<4>Marking TSC unstable due to: check_tsc_sync_source failed.
<6>Brought up 2 CPUs
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
-<3>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
-<3>PCI: Not using MMCONFIG.
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<7>ACPI: EC: Look up EC in DSDT
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3)
<6>ACPI: Using IOAPIC for interrupt routing
+<5>PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 127
+<5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
+<6>PCI: Using MMCONFIG
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
+<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<4>PCI quirk: region 0500-053f claimed by ICH6 GPIO
<6>PCI: Transparent bridge - 0000:00:1e.0
@@ -285,7 +291,9 @@
<6>NetLabel: protocols = UNLABELED CIPSOv4
<6>NetLabel: unlabeled traffic allowed by default
<4>ACPI: RTC can wake from S4
-<6>Time: tsc clocksource has been installed.
+<6>Time: hpet clocksource has been installed.
+<6>Switched to high resolution mode on CPU 0
+<6>Switched to high resolution mode on CPU 1
<6>pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
<6>pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
<6>pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
@@ -340,15 +348,11 @@
<6>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
<6>TCP: Hash tables configured (established 65536 bind 65536)
<6>TCP reno registered
-<6>checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
-<6>Switched to high resolution mode on CPU 0
-<4> it is
-<6>Freeing initrd memory: 7369k freed
+<6>checking if image is initramfs... it is
+<6>Freeing initrd memory: 7423k freed
<6>Machine check exception polling timer started.
-<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
-<5>apm: disabled - APM is not SMP safe.
<6>audit: initializing netlink socket (disabled)
-<5>audit(1187997798.852:1): initialized
+<5>audit(2418234223.871:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
@@ -363,22 +367,27 @@
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
+<7>Allocate Port Service[0000:00:1c.0:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
+<7>Allocate Port Service[0000:00:1c.1:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.2:pcie00]
<7>Allocate Port Service[0000:00:1c.2:pcie02]
+<7>Allocate Port Service[0000:00:1c.2:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.3:pcie00]
<7>Allocate Port Service[0000:00:1c.3:pcie02]
+<7>Allocate Port Service[0000:00:1c.3:pcie03]
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.4:pcie00]
<7>Allocate Port Service[0000:00:1c.4:pcie02]
+<7>Allocate Port Service[0000:00:1c.4:pcie03]
<6>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
<6>matroxfb: Matrox G550 detected
<6>PInS memtype = 5
@@ -390,7 +399,7 @@
<4>fb0: MATROX frame buffer device
<6>matroxfb_crtc2: secondary head of fb0 was registered as fb1
<6>Real Time Clock Driver v1.12ac
-<7>hpet_resources: 0xfed00000 is busy
+<4>hpet_acpi_add: no address or irqs in _CRS
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
@@ -407,18 +416,15 @@
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
-<6>input: AT Translated Set 2 keyboard as /class/input/input0
-<6>input: PC Speaker as /class/input/input1
+<6>input: PC Speaker as /class/input/input0
<6>NET: Registered protocol family 1
<6>Starting balanced_irq
<4>Using IPI No-Shortcut mode
-<6>Freeing unused kernel memory: 252k freed
-<4>Write protecting the kernel read-only data: 814k
+<6>Freeing unused kernel memory: 260k freed
+<4>Write protecting the kernel read-only data: 1215k
+<6>input: AT Translated Set 2 keyboard as /class/input/input1
<5>SCSI subsystem initialized
-<6>ACPI: Processor [CPU0] (supports 8 throttling states)
-<6>ACPI: Processor [CPU1] (supports 8 throttling states)
-<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device is not present [20070126]
-<4>ACPI Exception (processor_core-0790): AE_NOT_FOUND, Processor Device is not present [20070126]
+<4>thermal: Unknown symbol acpi_processor_set_thermal_limit
<7>libata version 2.21 loaded.
<7>ahci 0000:00:1f.2: version 2.3
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
@@ -431,12 +437,12 @@
<6>scsi3 : ahci
<6>scsi4 : ahci
<6>scsi5 : ahci
-<6>ata1: SATA max UDMA/133 cmd 0xf887c100 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata2: SATA max UDMA/133 cmd 0xf887c180 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata3: SATA max UDMA/133 cmd 0xf887c200 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata4: SATA max UDMA/133 cmd 0xf887c280 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata5: SATA max UDMA/133 cmd 0xf887c300 ctl 0x00000000 bmdma 0x00000000 irq 218
-<6>ata6: SATA max UDMA/133 cmd 0xf887c380 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata1: SATA max UDMA/133 cmd 0xf883c100 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata2: SATA max UDMA/133 cmd 0xf883c180 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata3: SATA max UDMA/133 cmd 0xf883c200 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata4: SATA max UDMA/133 cmd 0xf883c280 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata5: SATA max UDMA/133 cmd 0xf883c300 ctl 0x00000000 bmdma 0x00000000 irq 218
+<6>ata6: SATA max UDMA/133 cmd 0xf883c380 ctl 0x00000000 bmdma 0x00000000 irq 218
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata1.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
<6>ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32)
@@ -465,12 +471,12 @@
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
<5>sd 1:0:0:0: [sdb] Write Protect is off
<7>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
<5>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
-<6> sdb:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
-<4> sdb1
+<6> sdb: sdb1
<5>sd 1:0:0:0: [sdb] Attached SCSI disk
<5>sd 1:0:0:0: Attached scsi generic sg1 type 0
<6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
@@ -517,94 +523,139 @@
<5>st 8:0:12:0: Attached scsi tape st0
<6>st 8:0:12:0: st0: try direct i/o: yes (alignment 512 B)
<6>Linux agpgart interface v0.102
+<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
+<4>rtc_cmos: probe of 00:03 failed with error -16
+<6>agpgart: suspend/resume problematic: resume with 3D/DRI active may lockup X.Org
+<4>on some chipset/BIOS combos (see DEBUG_AGP_PM in intel-agp.c)
<6>agpgart: Detected an Intel 965Q Chipset.
<6>agpgart: Unknown page table size, assuming 512KB
<6>agpgart: Detected 7676K stolen memory.
<6>agpgart: AGP aperture is 256M @ 0x40000000
-<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
-<4>rtc_cmos: probe of 00:03 failed with error -16
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 22
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19
-<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
-<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
-<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
-<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
-<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
-<6>ehci_hcd 0000:00:1a.7: debug port 1
-<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
-<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00
-<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-<6>usb usb1: configuration #1 chosen from 1 choice
-<6>hub 1-0:1.0: USB hub found
-<6>hub 1-0:1.0: 4 ports detected
<6>USB Universal Host Controller Interface driver v3.0
-<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
-<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
-<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
-<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
-<6>ehci_hcd 0000:00:1d.7: debug port 1
-<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
-<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800
-<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-<6>usb usb2: configuration #1 chosen from 1 choice
-<6>hub 2-0:1.0: USB hub found
-<6>hub 2-0:1.0: 6 ports detected
<6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
-<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
+<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030c0
-<6>usb usb3: configuration #1 chosen from 1 choice
-<6>hub 3-0:1.0: USB hub found
-<6>hub 3-0:1.0: 2 ports detected
+<6>usb usb1: configuration #1 chosen from 1 choice
+<6>hub 1-0:1.0: USB hub found
+<6>hub 1-0:1.0: 2 ports detected
+<5>firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10
+<6>usb usb1: new device found, idVendor=0000, idProduct=0000
+<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb1: Product: UHCI Host Controller
+<6>usb usb1: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 22
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
-<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
+<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 22, io base 0x000030a0
-<6>usb usb4: configuration #1 chosen from 1 choice
-<6>hub 4-0:1.0: USB hub found
-<6>hub 4-0:1.0: 2 ports detected
-<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)
+<6>usb usb2: configuration #1 chosen from 1 choice
+<6>hub 2-0:1.0: USB hub found
+<6>hub 2-0:1.0: 2 ports detected
+<6>usb usb2: new device found, idVendor=0000, idProduct=0000
+<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb2: Product: UHCI Host Controller
+<6>usb usb2: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb2: SerialNumber: 0000:00:1a.1
+<6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
+<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
+<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
+<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
+<6>ehci_hcd 0000:00:1a.7: debug port 1
+<7>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
+<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x52c25c00
+<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+<6>usb usb3: configuration #1 chosen from 1 choice
+<6>hub 3-0:1.0: USB hub found
+<6>hub 3-0:1.0: 4 ports detected
+<6>usb usb3: new device found, idVendor=0000, idProduct=0000
+<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb3: Product: EHCI Host Controller
+<6>usb usb3: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd
+<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
+<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
-<6>usb usb5: configuration #1 chosen from 1 choice
-<6>hub 5-0:1.0: USB hub found
-<6>hub 5-0:1.0: 2 ports detected
-<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
-<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
-<7>ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
-<7>ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0xe, fmic=0xb, line=0xf, fline=0x0, cd=0x0, aux=0x0
-<7>ALSA sound/pci/hda/patch_sigmatel.c:1297: dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
+<6>usb usb4: configuration #1 chosen from 1 choice
+<6>hub 4-0:1.0: USB hub found
+<6>hub 4-0:1.0: 2 ports detected
+<5>firewire_core: created new fw device fw0 (0 config rom retries, S400)
+<6>usb usb4: new device found, idVendor=0000, idProduct=0000
+<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb4: Product: UHCI Host Controller
+<6>usb usb4: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb4: SerialNumber: 0000:00:1d.0
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
+<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
-<6>usb usb6: configuration #1 chosen from 1 choice
-<6>hub 6-0:1.0: USB hub found
-<6>hub 6-0:1.0: 2 ports detected
+<6>usb usb5: configuration #1 chosen from 1 choice
+<6>hub 5-0:1.0: USB hub found
+<6>hub 5-0:1.0: 2 ports detected
+<6>usb usb5: new device found, idVendor=0000, idProduct=0000
+<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb5: Product: UHCI Host Controller
+<6>usb usb5: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb5: SerialNumber: 0000:00:1d.1
<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
-<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
+<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
+<6>usb usb6: configuration #1 chosen from 1 choice
+<6>hub 6-0:1.0: USB hub found
+<6>hub 6-0:1.0: 2 ports detected
+<6>usb usb6: new device found, idVendor=0000, idProduct=0000
+<6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb6: Product: UHCI Host Controller
+<6>usb usb6: Manufacturer: Linux 2.6.23-rc3-mm1-testing uhci_hcd
+<6>usb usb6: SerialNumber: 0000:00:1d.2
+<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
+<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
+<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
+<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
+<6>ehci_hcd 0000:00:1d.7: debug port 1
+<7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
+<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x52c25800
+<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+<6>usb 5-2: new low speed USB device using uhci_hcd and address 2
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
-<6>hub 7-0:1.0: 2 ports detected
-<6>usb 6-2: new low speed USB device using uhci_hcd and address 2
-<6>usb 6-2: configuration #1 chosen from 1 choice
+<6>hub 7-0:1.0: 6 ports detected
+<6>usb usb7: new device found, idVendor=0000, idProduct=0000
+<6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
+<6>usb usb7: Product: EHCI Host Controller
+<6>usb usb7: Manufacturer: Linux 2.6.23-rc3-mm1-testing ehci_hcd
+<6>usb usb7: SerialNumber: 0000:00:1d.7
+<6>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
+<7>PCI: Setting latency timer of device 0000:00:1b.0 to 64
+<7>ALSA sound/pci/hda/hda_codec.c:2735: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2739: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2743: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
+<7>ALSA sound/pci/hda/hda_codec.c:2751: inputs: mic=0xe, fmic=0xb, line=0xf, fline=0x0, cd=0x0, aux=0x0
+<7>ALSA sound/pci/hda/patch_sigmatel.c:1344: dac_nids=3 (0x2/0x5/0x4/0x0/0x0)
<6>Adding 2097144k swap on /dev/system/swap. Priority:-1 extents:1 across:2097144k
-<6>usb 7-1: new full speed USB device using uhci_hcd and address 2
-<6>usb 7-1: configuration #1 chosen from 1 choice
+<6>usb 5-2: new low speed USB device using uhci_hcd and address 3
+<6>usb 5-2: configuration #1 chosen from 1 choice
+<6>usb 5-2: new device found, idVendor=413c, idProduct=3010
+<6>usb 5-2: new device strings: Mfr=0, Product=0, SerialNumber=0
+<6>usb 6-1: new full speed USB device using uhci_hcd and address 2
+<6>usb 6-1: configuration #1 chosen from 1 choice
+<6>usb 6-1: new device found, idVendor=0681, idProduct=0002
+<6>usb 6-1: new device strings: Mfr=1, Product=2, SerialNumber=3
+<6>usb 6-1: Product: Sinus 45 AB isdn
+<6>usb 6-1: Manufacturer: Siemens AG
+<6>usb 6-1: SerialNumber: 002F970BE0
<6>usbcore: registered new interface driver hiddev
<6>input: HID 413c:3010 as /class/input/input2
<6>input: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.1-2
@@ -617,9 +668,10 @@
<7>gigaset: Register driver capabilities to LL
<7>bas_gigaset: gigaset_probe: Check if device matches .. (Vendor: 0x681, Product: 0x2)
<7>bas_gigaset: gigaset_probe: wrong alternate setting 0 - trying to switch
-<6>usb 7-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2)
+<6>usb 6-1: gigaset_probe: Device matched (Vendor: 0x681, Product: 0x2)
<7>bas_gigaset: -------> 0x34 (0)
<7>gigaset: scheduling START
+<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<7>gigaset: connection state 0, event -110
<7>gigaset: unblocking all channels
<7>gigaset: blocking all channels
@@ -630,7 +682,6 @@
<7>gigaset: connection state 0, event -27
<6>usbcore: registered new interface driver bas_gigaset
<6>bas_gigaset: Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers
-<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<6>bas_gigaset: USB Driver for Gigaset 307x
<7>bas_gigaset: <-------3: 0x11 (0 [0x00 0x00])
<7>gigaset: scheduling timeout
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]
next prev parent reply other threads:[~2007-08-25 0:47 UTC|newest]
Thread overview: 220+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-22 9:06 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 10:11 ` [BUG] fs/xfs/xfs_bmap_btree.c:2312: error: 'b' undeclared (first use in this function) (Was Re: 2.6.23-rc3-mm1) Michal Piotrowski
2007-08-22 10:27 ` Michal Piotrowski
2007-08-23 5:27 ` Tim Shimmin
2007-08-22 13:02 ` [BUG] 2.6.23-rc3-mm1 - kernel BUG at net/core/skbuff.c:95! Kamalesh Babulal
2007-08-22 15:50 ` Andrew Morton
2007-08-22 17:58 ` Kay Sievers
2007-08-22 19:04 ` Balbir Singh
2007-08-22 20:55 ` Kay Sievers
2007-08-22 21:10 ` Balbir Singh
2007-08-23 18:59 ` Balbir Singh
2007-08-22 13:33 ` 2.6.23-rc3-mm1 Gabriel C
2007-08-22 16:09 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 17:01 ` 2.6.23-rc3-mm1 Gabriel C
2007-08-27 21:27 ` [-mm patch] make types.h usable for non-gcc C parsers Adrian Bunk
2007-08-27 21:34 ` Mike Frysinger
2007-08-27 21:36 ` Adrian Bunk
2007-08-27 21:42 ` Mike Frysinger
2007-08-28 7:37 ` Andrew Morton
2007-08-28 8:43 ` Sam Ravnborg
2007-08-28 14:19 ` Michael Matz
2007-08-28 14:40 ` Randy Dunlap
2007-08-28 14:42 ` Adrian Bunk
2007-08-28 17:06 ` Sam Ravnborg
2007-08-28 17:42 ` Mike Frysinger
2007-08-28 17:59 ` Adrian Bunk
2007-08-28 18:37 ` Sam Ravnborg
2007-08-22 14:19 ` 2.6.23-rc3-mm1 Michal Piotrowski
2007-08-22 16:17 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 15:30 ` net/ipv4/fib_trie.c - compile error (Re: 2.6.23-rc3-mm1) Gabriel C
2007-08-22 15:41 ` Adrian Bunk
2007-08-22 16:32 ` Gabriel C
2007-08-22 17:03 ` Paul E. McKenney
2007-08-27 6:36 ` Jarek Poplawski
2007-08-27 16:23 ` Paul E. McKenney
2007-08-22 16:15 ` drivers/scsi/advansys.c - ld error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-22 16:28 ` Matthew Wilcox
2007-08-22 16:57 ` Gabriel C
2007-08-22 16:33 ` 2.6.23-rc3-mm1: fix b43 compilation Rafael J. Wysocki
2007-08-22 21:56 ` Michael Buesch
2007-08-23 2:56 ` John W. Linville
2007-08-23 7:07 ` Andrew Morton
2007-08-22 17:10 ` drivers/net/ppp_generic - __modpost error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-22 17:17 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-22 18:10 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-23 11:39 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-23 12:03 ` 2.6.23-rc3-mm1 Andy Whitcroft
2007-08-23 12:22 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-23 12:34 ` 2.6.23-rc3-mm1 Andy Whitcroft
2007-08-23 12:28 ` 2.6.23-rc3-mm1 Sam Ravnborg
2007-08-23 14:24 ` 2.6.23-rc3-mm1 Sam Ravnborg
2007-08-23 12:07 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-23 16:25 ` 2.6.23-rc3-mm1 Mel Gorman
2007-08-22 17:24 ` 2.6.23-rc3-mm1 Torsten Kaiser
2007-08-22 18:14 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 17:26 ` 2.6.23-rc3-mm1: locking boot-time self-test failure Mariusz Kozlowski
2007-08-22 21:27 ` Frederik Deweerdt
2007-08-22 17:30 ` 2.6.23-rc3-mm1: WARNING: during resume from suspend on x86_64 Rafael J. Wysocki
2007-08-22 18:03 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 18:32 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-22 19:38 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 19:17 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 20:53 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 20:03 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 21:14 ` 2.6.23-rc3-mm1 Andi Kleen
2007-08-22 20:37 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-22 19:04 ` 2.6.23-rc3-mm1: kgdb build failure on powerpc Mariusz Kozlowski
2007-08-22 19:04 ` Mariusz Kozlowski
2007-08-22 19:47 ` Andrew Morton
2007-08-22 19:47 ` Andrew Morton
2007-08-22 22:44 ` [Kgdb-bugreport] " Jason Wessel
2007-08-22 22:44 ` Jason Wessel
2007-08-22 23:53 ` Andrew Morton
2007-08-22 23:53 ` Andrew Morton
2007-08-23 3:25 ` Jason Wessel
2007-08-29 23:43 ` Pete/Piet Delaney
2007-08-29 23:43 ` Pete/Piet Delaney
2007-08-30 0:05 ` Pete/Piet Delaney
2007-08-30 0:05 ` Pete/Piet Delaney
2007-08-30 1:19 ` Pete/Piet Delaney
2007-08-30 1:19 ` Pete/Piet Delaney
2007-08-30 1:38 ` Randy Dunlap
2007-08-30 1:38 ` Randy Dunlap
2007-08-30 2:07 ` Jason Wessel
2007-08-30 2:07 ` Jason Wessel
2007-08-30 2:13 ` Jason Wessel
2007-08-30 2:13 ` Jason Wessel
2007-08-22 19:16 ` 2.6.23-rc3-mm1: net/wireless/rt2x00mac.c build failure Mariusz Kozlowski
2007-08-22 19:31 ` Ivo van Doorn
2007-08-22 19:54 ` Mariusz Kozlowski
2007-08-22 20:12 ` Ivo van Doorn
2007-08-22 20:22 ` Rafael J. Wysocki
2007-08-22 19:58 ` John W. Linville
2007-08-25 0:27 ` Ulrich Kunitz
2007-08-22 20:23 ` 2.6.23-rc3-mm1: inlining failures in sound/pci/hda/hda_codec.c Mariusz Kozlowski
2007-08-22 21:07 ` Takashi Iwai
2007-08-22 21:18 ` Mariusz Kozlowski
2007-08-22 21:44 ` Adrian Bunk
2007-08-22 20:25 ` [-mm patch] enforce noreplace-smp in alternative_instructions() Frederik Deweerdt
2007-08-23 21:50 ` Andrew Morton
2007-08-24 6:04 ` Frederik Deweerdt
2007-08-24 6:46 ` Jeremy Fitzhardinge
2007-08-24 8:22 ` Frederik Deweerdt
2007-08-25 12:07 ` Rusty Russell
2007-08-25 12:23 ` Frederik Deweerdt
2007-08-25 21:14 ` Frederik Deweerdt
2007-08-27 16:09 ` [PATCH] Fix lguest page-pinning logic ("lguest: bad stack page 0xc057a000") Rusty Russell
2007-08-30 16:38 ` Frederik Deweerdt
2007-08-30 22:12 ` Rusty Russell
2007-08-30 22:14 ` [PATCH] Fix out-by-one error in traps.c Rusty Russell
2007-08-31 4:44 ` Linus Torvalds
2007-08-31 6:03 ` Rusty Russell
2007-08-31 7:51 ` Linus Torvalds
2007-08-31 17:37 ` Rusty Russell
2007-08-31 18:24 ` Linus Torvalds
2007-09-04 18:18 ` Rusty Russell
2007-08-23 23:16 ` [-mm patch] enforce noreplace-smp in alternative_instructions() Jeremy Fitzhardinge
2007-08-24 6:06 ` Frederik Deweerdt
2007-08-22 23:30 ` drivers/char/nozomi.c - compile error ( Re: 2.6.23-rc3-mm1 ) Gabriel C
2007-08-23 3:45 ` Randy Dunlap
2007-08-22 23:34 ` fs/xfs/xfs_bmap_btree.c - compile error (Re: 2.6.23-rc3-mm1) Gabriel C
2007-08-23 3:47 ` Randy Dunlap
2007-08-23 2:08 ` 2.6.23-rc3-mm1 - memory layout change? - lost support for MAP_32BIT? - mono crashes Zan Lynx
2007-08-23 6:57 ` Andrew Morton
2007-08-23 9:28 ` Jiri Kosina
2007-08-23 17:32 ` Zan Lynx
2007-08-23 23:52 ` Andrew Morton
2007-08-24 0:09 ` Jiri Kosina
2007-08-24 16:17 ` Arjan van de Ven
2007-08-23 11:24 ` x86_64-dynticks-disable-hpet_id_legsup-hpets.patch hangs the system Gautham R Shenoy
2007-08-23 20:47 ` Andrew Morton
2007-08-23 20:56 ` Thomas Gleixner
2007-08-23 13:33 ` 2.6.23-rc3-mm1 - irda goes belly up Valdis.Kletnieks
2007-08-23 17:37 ` Alexey Dobriyan
2007-08-23 18:45 ` Valdis.Kletnieks
2007-08-23 21:16 ` Andrew Morton
2007-08-24 3:11 ` Eric W. Biederman
2007-08-24 3:46 ` Eric W. Biederman
2007-08-24 3:53 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Eric W. Biederman
2007-08-24 3:55 ` [PATCH 2/2] sysctl: For irda update sysctl_checks list of binary paths Eric W. Biederman
2007-08-26 22:03 ` Samuel Ortiz
2007-08-25 8:29 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Valdis.Kletnieks
2007-08-25 12:57 ` Eric W. Biederman
2007-08-25 14:07 ` Valdis.Kletnieks
2007-08-25 17:59 ` Eric W. Biederman
2007-08-28 18:40 ` Valdis.Kletnieks
2007-08-28 21:06 ` Eric W. Biederman
2007-08-25 18:03 ` [PATCH] sysctl: Update sysctl_check to handle compiled out code Eric W. Biederman
2007-08-28 18:44 ` Valdis.Kletnieks
2007-08-26 22:02 ` [PATCH 1/2] sysctl: Properly register the irda binary sysctl numbers Samuel Ortiz
2007-08-24 23:27 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:07 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-25 0:13 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 0:13 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 0:38 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 0:38 ` 2.6.23-rc3-mm1 Pallipadi, Venkatesh
2007-08-25 23:26 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 23:57 ` 2.6.23-rc3-mm1 Randy Dunlap
2007-08-27 13:35 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:14 ` 2.6.23-rc3-mm1 Dave Jones
2007-08-25 0:21 ` 2.6.23-rc3-mm1 john stultz
2007-08-25 22:39 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-08-25 0:47 ` Tilman Schmidt [this message]
2007-08-25 3:30 ` 2.6.23-rc3-mm1 Andrew Morton
2007-08-25 4:28 ` 2.6.23-rc3-mm1 Dave Jones
2007-08-25 7:55 ` 2.6.23-rc3-mm1 Paul Rolland
2007-08-25 23:37 ` 2.6.23-rc3-mm1 Tilman Schmidt
2007-09-05 20:41 ` Clock trouble retest results with 2.6.23-rc4-mm1 (was: 2.6.23-rc3-mm1) Tilman Schmidt
2007-08-26 13:04 ` X freezes kernel during exit [Re: 2.6.23-rc3-mm1] Jiri Slaby
2007-08-28 11:41 ` Jiri Slaby
2007-09-09 11:44 ` Jiri Slaby
2007-09-09 12:47 ` Andrew Morton
2007-09-09 13:04 ` Jiri Slaby
2007-09-09 14:08 ` Jiri Slaby
2007-09-09 14:17 ` Andi Kleen
2007-09-09 14:26 ` Jiri Slaby
2007-09-09 14:33 ` Andi Kleen
2007-09-09 14:35 ` Jiri Slaby
2007-09-09 14:43 ` Jiri Slaby
2007-09-09 15:01 ` Andi Kleen
2007-09-09 15:49 ` Jiri Slaby
2007-09-11 15:18 ` Dave Airlie
2007-09-17 11:09 ` Jiri Slaby
2007-08-27 21:27 ` [-mm patch] make "struct menu_governor" static (again) Adrian Bunk
2007-08-27 22:32 ` Adam Belay
2007-08-27 21:27 ` [-mm patch] remove parport_device_num() Adrian Bunk
2007-08-27 21:27 ` [-mm patch] make do_restart_poll() static Adrian Bunk
2007-08-27 21:27 ` [-mm patch] unexport snd_ctl_elem_{read,write} Adrian Bunk
2007-08-27 21:27 ` [-mm patch] unexport sys_{open,read} Adrian Bunk
2007-08-27 22:53 ` Arjan van de Ven
2007-08-27 23:17 ` Adrian Bunk
2007-08-27 21:27 ` 2.6.23-rc3-mm1: m32r defconfig compile error Adrian Bunk
2007-08-28 3:50 ` Hirokazu Takata
2007-08-27 21:27 ` [-mm patch] remove unwind exports Adrian Bunk
2007-08-27 21:28 ` [-mm patch] unexport noautodma Adrian Bunk
2007-08-27 21:28 ` [-mm patch] mousedev.c:mixdev_open_devices() bugfix Adrian Bunk
2007-08-27 21:29 ` [-mm patch] ivtv-fb.c bugfix Adrian Bunk
2007-08-28 6:30 ` [v4l-dvb-maintainer] " Hans Verkuil
2007-08-27 21:29 ` [-mm patch] iwl-base.c bugfixes Adrian Bunk
2007-08-27 22:34 ` Tomas Winkler
2007-08-27 21:29 ` 2.6.23-rc3-mm1: i386: -maccumulate-outgoing-args unconditionally Adrian Bunk
2007-08-28 11:32 ` oops at sr_block_release [Re: 2.6.23-rc3-mm1] Jiri Slaby
2007-08-28 15:08 ` Satyam Sharma
2007-08-28 15:21 ` Jiri Slaby
2007-08-29 2:58 ` Andrew Morton
2007-08-29 14:04 ` 2.6.23-rc3-mm1 Valdis.Kletnieks
2007-08-29 17:37 ` 2.6.23-rc3-mm1 - vdso and gettimeofday issues with glibc Valdis.Kletnieks
2007-08-29 23:15 ` Andrew Morton
2007-08-30 2:46 ` Ulrich Drepper
2007-08-30 14:08 ` Valdis.Kletnieks
2007-08-31 21:21 ` Chuck Ebbert
2007-08-30 16:27 ` Chuck Ebbert
2007-09-09 0:24 ` Valdis.Kletnieks
2007-09-09 7:27 ` Andi Kleen
2007-09-10 19:07 ` Valdis.Kletnieks
2007-08-30 16:30 ` Chuck Ebbert
2007-09-01 10:07 ` Andi Kleen
2007-09-07 19:39 ` Chuck Ebbert
2007-09-08 8:57 ` Andi Kleen
2007-09-09 3:20 ` Valdis.Kletnieks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46CF7C3F.10707@imap.cc \
--to=tilman@imap.cc \
--cc=ak@suse.de \
--cc=akpm@linux-foundation.org \
--cc=davej@codemonkey.org.uk \
--cc=johnstul@us.ibm.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=trenn@suse.de \
--cc=venkatesh.pallipadi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.