[PATCH 19/20] pm2fb: panning and hardware cursor fixes

["Antonino A. Daplas" <adaplas@gmail.com>]

From: Krzysztof Helt <krzysztof.h1@wp.pl>

This patch:
- disallows setting of virtual height above 2048 as it does
  not work for accelerated copyarea and imageblit
- fixes blinking of pm2v cursor by pushing cursor outside
  the display (x=2047)
- fixes hardware cursor position on Permedia 2 chips with
  panning enabled
- enables hardware cursor by default

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
---

 drivers/video/pm2fb.c |   35 +++++++++++++++++++----------------
 1 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 20476f4..9db1f2e 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -66,7 +66,7 @@ #define PM2_PIXMAP_SIZE	(1600 * 4)
 /*
  * Driver data
  */
-static int hwcursor;
+static int hwcursor = 1;
 static char *mode __devinitdata;
 
 /*
@@ -587,6 +587,11 @@ static int pm2fb_check_var(struct fb_var
 		return -EINVAL;
 	}
 
+	/* permedia cannot blit over 2048 */
+	if (var->yres_virtual > 2047) {
+		var->yres_virtual = 2047;
+	}
+
 	if (var->xoffset) {
 		DPRINTK("xoffset not supported\n");
 		return -EINVAL;
@@ -1258,12 +1263,21 @@ static int pm2vfb_cursor(struct fb_info 
 {
 	struct pm2fb_par *par = info->par;
 	u8 mode = PM2F_CURSORMODE_TYPE_X;
+	int x = cursor->image.dx - info->var.xoffset;
+	int y = cursor->image.dy - info->var.yoffset;
 
 	if (cursor->enable)
 		mode |= PM2F_CURSORMODE_CURSOR_ENABLE;
 
 	pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_MODE, mode);
 
+	if (!cursor->enable)
+		x = 2047;	/* push it outside display */
+	pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_LOW, x & 0xff);
+	pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_HIGH, (x >> 8) & 0xf);
+	pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_LOW, y & 0xff);
+	pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_HIGH, (y >> 8) & 0xf);
+
 	/*
 	 * If the cursor is not be changed this means either we want the
 	 * current cursor state (if enable is set) or we want to query what
@@ -1272,16 +1286,6 @@ static int pm2vfb_cursor(struct fb_info 
 	if (!cursor->set)
 		return 0;
 
-	if (cursor->set & FB_CUR_SETPOS) {
-		int x = cursor->image.dx - info->var.xoffset;
-		int y = cursor->image.dy - info->var.yoffset;
-
-		pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_LOW, x & 0xff);
-		pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_HIGH, (x >> 8) & 0xf);
-		pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_LOW, y & 0xff);
-		pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_Y_HIGH, (y >> 8) & 0xf);
-	}
-
 	if (cursor->set & FB_CUR_SETHOT) {
 		pm2v_RDAC_WR(par, PM2VI_RD_CURSOR_X_HOT,
 			     cursor->hot.x & 0x3f);
@@ -1373,7 +1377,7 @@ static int pm2fb_cursor(struct fb_info *
 	if (par->type == PM2_TYPE_PERMEDIA2V)
 		return pm2vfb_cursor(info, cursor);
 
-	mode = 0;
+	mode = 0x40;
 	if (cursor->enable)
 		 mode = 0x43;
 
@@ -1388,10 +1392,9 @@ static int pm2fb_cursor(struct fb_info *
 		return 0;
 
 	if (cursor->set & FB_CUR_SETPOS) {
-		int x, y;
+		int x = cursor->image.dx - info->var.xoffset + 63;
+		int y = cursor->image.dy - info->var.yoffset + 63;
 
-		x = cursor->image.dx + 63;
-		y = cursor->image.dy + 63;
 		WAIT_FIFO(par, 4);
 		pm2_WR(par, PM2R_RD_CURSOR_X_LSB, x & 0xff);
 		pm2_WR(par, PM2R_RD_CURSOR_X_MSB, (x >> 8) & 0x7);
@@ -1838,7 +1841,7 @@ module_param(noaccel, bool, 0);
 MODULE_PARM_DESC(noaccel, "Disable acceleration");
 module_param(hwcursor, int, 0644);
 MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
-			"(1=enable, 0=disable, default=0)");
+			"(1=enable, 0=disable, default=1)");
 #ifdef CONFIG_MTRR
 module_param(nomtrr, bool, 0);
 MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/