Re: [PATCH 3/4] PowerPC 440EPx: Sequoia bootwrapper

[Valentine Barshak <vbarshak@ru.mvista.com>]

David Gibson wrote:
> On Wed, Aug 15, 2007 at 04:22:58PM +0400, Valentine Barshak wrote:
>> David Gibson wrote:
>>> On Tue, Aug 14, 2007 at 10:53:55PM +0400, Valentine Barshak wrote:
>>>> Bootwrapper code for AMCC 440EPx Sequoia board.
>>>> The DDR2 Denali controller support has been moved to
>>>>  arch/powerpc/boot/4xx.c
>>>> The code also uses 440EP clocking fixups
>>>> initially provided for 440EP Bamboo.
>>>>
>>>> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
>>> [snip]
>>>> diff -ruN linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c linux-2.6/arch/powerpc/boot/cuboot-sequoia.c
>>>> --- linux-2.6.orig/arch/powerpc/boot/cuboot-sequoia.c	1970-01-01 03:00:00.000000000 +0300
>>>> +++ linux-2.6/arch/powerpc/boot/cuboot-sequoia.c	2007-08-14 17:25:37.000000000 +0400
>>>> @@ -0,0 +1,31 @@
>>>> +/*
>>>> + * Old U-boot compatibility for Sequoia
>>>> + *
>>>> + * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au>
>>>> + *
>>>> + * Copyright 2007 David Gibson, IBM Corporatio.
>>>> + *   Based on cuboot-83xx.c, which is:
>>>> + * Copyright (c) 2007 Freescale Semiconductor, Inc.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify it
>>>> + * under the terms of the GNU General Public License version 2 as published
>>>> + * by the Free Software Foundation.
>>>> + */
>>>> +
>>>> +#include "ops.h"
>>>> +#include "stdio.h"
>>>> +#include "44x.h"
>>>> +#include "cuboot.h"
>>>> +
>>>> +#define TARGET_4xx
>>>> +#define TARGET_44x
>>> Surely you need to be more specific than that to select the correct
>>> bd_t structure?
>> Both TARGET_4xx and TARGET_44x should be selected for 44x. Otherwise I 
>> get wrong bd_t structure (wrong offsets to the eth0/eth1 MAC addresses). 
>> In the older arch/ppc code it used to be CONFIG_4xx and it was selected 
>> for CONFIG_40x and CONFIG_44x as well.
> 
> Yes, I'm not objecting to those TARGET macros, but I'd be very
> surprised if you don't need more to really get the correct bd_t
> structure.

Sorry, I don't quite follow.
As far as I can tell the bd_t structure looks OK.
Could you be more specific, please?
What exactly do you think I need to get the correct bd_t?
Thanks,
Valentine.

> 
> [snip]
>>>> diff -ruN linux-2.6.orig/arch/powerpc/boot/sequoia.c linux-2.6/arch/powerpc/boot/sequoia.c
>>>> --- linux-2.6.orig/arch/powerpc/boot/sequoia.c	1970-01-01 03:00:00.000000000 +0300
>>>> +++ linux-2.6/arch/powerpc/boot/sequoia.c	2007-08-14 20:52:10.000000000 +0400
>>> Unless another bootloader is expected to come along for Sequoia,
>>> there's no reason to separate sequoia.c from cuboot-sequoia.c
>> The previous version of Sequoia series had treeboot-sequoia.c, but I've 
>> removed it since only u-boot is used now.
>> I'm not sure if there are any other bootloaders expected, but is it OK 
>> if I leave 2 separate files just in case? :)
> 
> Not unless you have a particular reason to expect another bootloader
> will come along, which doesn't seem that likely to me.  Or rather the
> only likely future bootloader I'd see is newer versions of u-boot
> which are device tree aware and handled separately anyway.
>