From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Soltys Date: Tue, 28 Aug 2007 15:09:37 +0000 Subject: Re: [LARTC] prio bands and ignored priomap when any tc filter is Message-Id: <46D43AB1.40706@ziu.info> List-Id: References: <46D3AC5D.3010601@ziu.info> In-Reply-To: <46D3AC5D.3010601@ziu.info> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Javier Ors wrote: > I'm not sure but I think that you have to choose either to use the > priomap, or to use only the filters. I have also notice this problem, if > you set a filter for only one kind of traffic the rest of it ends in > some random band. > Ok, thanks for confirmation. > Anyway, the priomap is a mess and for the ip traffic you can do the same > that it does (and much more) with just three tc filters. Well, priomap is just a quick temporary solution here. I'll be setting up hfsc most probably. > By the way, > IMHO all the priomap stuff is not quite clear in the LARTC HOWTO, and > have prepared some alternative explanation. Is still the HOWTO accepting > aportations? I've seen that hasn't been updated for many years now. No idea, I'm not the one to be asked about it :) Russell Stuart has a bit more complete info about prio here: http://ace-host.stuart.id.au/russell/files/tc/doc/tc/sch_prio.txt _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc