From: Koen Kooi <k.kooi@student.utwente.nl>
To: Using the OpenEmbedded metadata to build Distributions
<openembedded-devel@openembedded.org>
Subject: Re: Splitting up bluez in a sane way, was Re: Task-base is big :(
Date: Sat, 15 Sep 2007 10:29:50 +0200 [thread overview]
Message-ID: <46EB97FE.1030906@student.utwente.nl> (raw)
In-Reply-To: <46EA57E9.4020202@dominion.kabel.utwente.nl>
[-- Attachment #1: Type: text/plain, Size: 9249 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Koen Kooi schreef:
> Marcin Juszkiewicz schreef:
>> Dnia piątek, 14 września 2007, Koen Kooi napisał:
>>
>>> What can be done is to make the default bluez-utils build only build
>>> bluez-utils* and have seperate recipes for all the 3rdparty stuff it
>>> builds:
>>> That would solve both buildtime and runtime issues.
>>>
>>> What do you think?
>> bluez-utils-cups, bluez-utils-gstreamer, bluez-utils-alsa? Sounds good for
>> me - especially first both.
>
>
> bluez-utils-cups and bluez-utils-alsa can be done for sure, but I haven't looked at where
> gstreamer comes in and if it can be a seperate package.
What do you think of this patch?
regards,
Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFG65f+MkyGM64RGpERAjykAKC6h9p8EPGj2e1bLRZVyVUWM3d/ZQCePdiE
K2akk6htq346s6KfG250gYs=
=dAPx
-----END PGP SIGNATURE-----
#
# old_revision [ed2dc1d95bc34057f0b86292d7754ebbccb01504]
#
# add_file "packages/bluez/bluez-cups-backend_3.18.bb"
# content [6d3dd18f0576378f8bae0c3e251bce0ca132176e]
#
# add_file "packages/bluez/bluez-libs_3.18.bb"
# content [dc7c9ab3cf4931c0678271b1a5ef7511ebb7b82d]
#
# add_file "packages/bluez/bluez-utils-alsa_3.18.bb"
# content [b7eb82c734b71cf61ac35a052d87da836df665d4]
#
# add_file "packages/bluez/bluez-utils3.inc"
# content [67f1049d4efcca0d1468bbd4b8a4773c40c05d2f]
#
# add_file "packages/bluez/bluez-utils_3.18.bb"
# content [6eab1b4ae54ca017408988788320c718efedc784]
#
============================================================
--- packages/bluez/bluez-cups-backend_3.18.bb 6d3dd18f0576378f8bae0c3e251bce0ca132176e
+++ packages/bluez/bluez-cups-backend_3.18.bb 6d3dd18f0576378f8bae0c3e251bce0ca132176e
@@ -0,0 +1,26 @@
+require bluez-utils3.inc
+
+DEPENDS += "cups"
+
+# see bluez-utils3.inc for the explanation of these option
+EXTRA_OECONF = " \
+ --enable-bccmd \
+ --enable-hid2hci \
+ --disable-alsa \
+ --enable-cups \
+ --enable-glib \
+ --disable-sdpd \
+ --enable-network \
+ --enable-serial \
+ --enable-input \
+ --enable-audio \
+ --enable-echo \
+ --enable-configfile \
+ --enable-initscripts \
+ --enable-test \
+ "
+
+PACKAGES = "${PN}"
+
+FILES_${PN} = "${libdir}/cups/backend/bluetooth"
+RDEPENDS_${PN} = "cups"
============================================================
--- packages/bluez/bluez-libs_3.18.bb dc7c9ab3cf4931c0678271b1a5ef7511ebb7b82d
+++ packages/bluez/bluez-libs_3.18.bb dc7c9ab3cf4931c0678271b1a5ef7511ebb7b82d
@@ -0,0 +1 @@
+require bluez-libs.inc
============================================================
--- packages/bluez/bluez-utils-alsa_3.18.bb b7eb82c734b71cf61ac35a052d87da836df665d4
+++ packages/bluez/bluez-utils-alsa_3.18.bb b7eb82c734b71cf61ac35a052d87da836df665d4
@@ -0,0 +1,24 @@
+require bluez-utils3.inc
+
+DEPENDS += "alsa-lib"
+
+# see bluez-utils3.inc for the explanation of these option
+EXTRA_OECONF = " \
+ --enable-bccmd \
+ --disable-hid2hci \
+ --enable-alsa \
+ --disable-cups \
+ --enable-glib \
+ --disable-sdpd \
+ --enable-network \
+ --enable-serial \
+ --enable-input \
+ --enable-audio \
+ --enable-echo \
+ --enable-configfile \
+ --enable-initscripts \
+ --enable-test \
+ "
+
+PACKAGES = "${PN}"
+FILES_${PN} = "${libdir}/alsa-lib/libasound*"
============================================================
--- packages/bluez/bluez-utils3.inc 67f1049d4efcca0d1468bbd4b8a4773c40c05d2f
+++ packages/bluez/bluez-utils3.inc 67f1049d4efcca0d1468bbd4b8a4773c40c05d2f
@@ -0,0 +1,143 @@
+DESCRIPTION = "Linux Bluetooth Stack Userland Utilities."
+SECTION = "console"
+PRIORITY = "optional"
+DEPENDS = "gstreamer gst-plugins-base bluez-libs-${PV} libusb dbus glib-2.0"
+PROVIDES = "bluez-utils-dbus"
+RPROVIDES_${PN} = "bluez-pan bluez-sdp bluez-utils-dbus"
+RREPLACES = "bluez-utils-dbus"
+RCONFLICTS_${PN} = "bluez-utils-nodbus"
+LICENSE = "GPL"
+
+# ti patch doesn't apply, people using it should rediff it and send it upstream
+SRC_URI = "http://bluez.sourceforge.net/download/bluez-utils-${PV}.tar.gz \
+ file://hcid.conf \
+# file://hciattach-ti-bts.patch;patch=1 \
+
+S = "${WORKDIR}/bluez-utils-${PV}"
+
+inherit autotools update-rc.d
+
+EXTRA_OECONF = " \
+ --enable-bccmd \
+ --enable-hid2hci \
+ --enable-alsa \
+ --enable-cups \
+ --enable-glib \
+ --disable-sdpd \
+ --enable-network \
+ --enable-serial \
+ --enable-input \
+ --enable-audio \
+ --enable-echo \
+ --enable-configfile \
+ --enable-initscripts \
+ --enable-test \
+ "
+
+# The config options are explained below:
+
+# --enable-obex enable OBEX support
+# --enable-alsa enable ALSA support, not needed for nokia770, nokia800 and fic-gtao1
+# --enable-cups install CUPS backend support
+# --enable-bccmd install BCCMD interface utility
+# --enable-avctrl install Audio/Video control utility
+# --enable-hid2hci install HID mode switching utility
+# --enable-dfutool install DFU firmware upgrade utility
+
+# --enable-glib For systems that use and install GLib anyway
+# --disable-sdpd The sdpd is obsolete and should no longer be used. This of course requires that hcid will be started with -s to enable the SDP server
+
+#Following services can be enabled so far:
+# --enable-network
+# --enable-serial
+# --enable-input
+# --enable-audio
+# --enable-echo
+
+#There is no need to modify any init script. They will be started
+#automatically or on demand. Only /etc/bluetooth/*.service files should
+#be patched to change name or the autostart value.
+# --enable-configfile
+# --enable-initscripts
+
+#For even smaller -doc packages
+# --disable-manpages
+# --disable-pcmciarules
+
+#I haven't seen any embedded device with HID proxy support. So simply
+#disable it:
+# --disable-hid2hci
+
+
+do_install_append() {
+ install -d ${D}${base_sbindir} ${D}${base_bindir}/ ${D}${sysconfdir}/apm/event.d/
+ mv ${D}${sbindir}/* ${D}${base_sbindir}/
+ mv ${D}${bindir}/* ${D}${base_bindir}/
+ rmdir ${D}${bindir} ${D}${sbindir}
+ chmod u+s ${D}${base_sbindir}/hciattach ${D}${base_sbindir}/hciconfig
+ install -m 0644 ${WORKDIR}/hcid.conf ${D}${sysconfdir}/bluetooth/
+ install -m 0755 ${S}/daemon/.libs/passkey-agent ${D}${base_bindir}/
+}
+
+
+INITSCRIPT_NAME = "bluetooth"
+INITSCRIPT_PARAMS = "defaults 23 19"
+
+
+PACKAGES =+ "${PN}-compat"
+
+CONFFILES_${PN} = " \
+ ${sysconfdir}/bluetooth/hcid.conf \
+ ${sysconfdir}/default/bluetooth \
+ "
+
+CONFFILES_${PN}-compat = " \
+ ${sysconfdir}/bluetooth/rfcomm.conf \
+ "
+
+FILES_${PN} = " \
+ ${base_sbindir}/hcid \
+ ${libdir}/bluetooth \
+ ${sysconfdir}/init.d/bluetooth \
+ ${sysconfdir}/bluetooth/*.service \
+ ${sysconfdir}/bluetooth/hcid.conf \
+ ${sysconfdir}/default \
+ ${sysconfdir}/dbus-1 \
+ ${base_sbindir}/hciattach \
+ "
+
+FILES_${PN}-dbg += " \
+ ${libdir}/bluetooth/.debug \
+ ${libdir}/cups/backend/.debug \
+ ${libdir}/alsa-lib/.debug \
+ "
+
+FILES_${PN}-compat = " \
+ ${base_bindir}/sdptool \
+ ${base_bindir}/dund \
+ ${base_bindir}/rctest \
+ ${base_bindir}/ciptool \
+ ${base_bindir}/l2test \
+ ${base_bindir}/rfcomm \
+ ${base_bindir}/hcitool \
+ ${base_bindir}/pand \
+ ${base_bindir}/hidd \
+ ${base_bindir}/l2ping \
+ ${base_sbindir}/hciconfig \
+ ${base_sbindir}/bccmd \
+ ${base_sbindir}/hciemu \
+ ${base_sbindir}/hid2hci \
+ ${base_bindir}/passkey-agent \
+ ${sysconfdir}/bluetooth/rfcomm.conf \
+ "
+
+
+
+
+
+
+
+
+
+
+
============================================================
--- packages/bluez/bluez-utils_3.18.bb 6eab1b4ae54ca017408988788320c718efedc784
+++ packages/bluez/bluez-utils_3.18.bb 6eab1b4ae54ca017408988788320c718efedc784
@@ -0,0 +1,23 @@
+require bluez-utils3.inc
+
+# see bluez-utils3.inc for the explanation of these option
+EXTRA_OECONF = " \
+ --enable-bccmd \
+ --enable-hid2hci \
+ --disable-alsa \
+ --disable-cups \
+ --enable-glib \
+ --disable-sdpd \
+ --enable-network \
+ --enable-serial \
+ --enable-input \
+ --enable-audio \
+ --enable-echo \
+ --enable-configfile \
+ --enable-initscripts \
+ --enable-test \
+ "
+
+
+CONFFILES_${PN} = "${sysconfdir}/bluetooth/hcid.conf ${sysconfdir}/bluetooth/rfcomm.conf \
+ ${sysconfdir}/default/bluetooth"
next prev parent reply other threads:[~2007-09-15 8:33 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-11 11:18 Task-base is big :( Marcin Juszkiewicz
2007-09-11 17:37 ` Leon Woestenberg
2007-09-11 19:27 ` Koen Kooi
2007-09-11 21:10 ` USE flags - why they won't work for OE Richard Purdie
2007-09-11 23:14 ` Leon Woestenberg
2007-09-12 5:55 ` Stelios Koroneos
2007-09-12 11:06 ` José Bernardo Bandos Rodrigues
2007-09-12 16:38 ` Darcy Watkins
2007-09-12 11:46 ` Leon Woestenberg
2007-09-12 21:35 ` Richard Purdie
2007-09-11 21:17 ` Task-base is big :( Richard Purdie
2007-09-11 22:22 ` Detlef Vollmann
2007-09-11 22:55 ` Leon Woestenberg
2007-09-12 5:56 ` Stelios Koroneos
2007-09-12 7:53 ` Graeme Gregory
2007-09-12 8:43 ` Koen Kooi
2007-09-12 12:02 ` Binary packages (was: Task-base is big :( ) Detlef Vollmann
2007-09-12 12:45 ` Task-base is big :( Detlef Vollmann
2007-09-12 23:21 ` Richard Purdie
2007-09-11 23:43 ` Dr. Michael Lauer
2007-09-12 6:04 ` Koen Kooi
2007-09-14 7:21 ` Splitting up bluez in a sane way, was " Koen Kooi
2007-09-14 9:22 ` Marcin Juszkiewicz
2007-09-14 9:44 ` Koen Kooi
2007-09-15 8:29 ` Koen Kooi [this message]
2007-09-15 12:31 ` Marcin Juszkiewicz
2007-09-15 12:59 ` Koen Kooi
2007-09-18 17:54 ` Koen Kooi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EB97FE.1030906@student.utwente.nl \
--to=k.kooi@student.utwente.nl \
--cc=openembedded-devel@lists.openembedded.org \
--cc=openembedded-devel@openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.