All of lore.kernel.org
 help / color / mirror / Atom feed
From: Carlos Aguiar <carlos.aguiar@indt.org.br>
To: omap-linux <linux-omap-open-source@linux.omap.com>
Subject: [PATCH 02/14] MMC: OMAP: New release dma and abort xfer functions
Date: Thu, 20 Sep 2007 11:03:09 -0400	[thread overview]
Message-ID: <46F28BAD.7060904@indt.org.br> (raw)

From: Juha Yrjola <juha.yrjola@solidboot.com>

New functions to support MMC multislot:
mmc_omap_release_dma() and mmc_omap_abort_xfer().

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
---
 drivers/mmc/host/omap.c |   79 +++++++++++++++++++++++++++++++++++-----------
 1 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 50f0561..18f7c1b 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -343,26 +343,32 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
 }
 
 static void
+mmc_omap_release_dma(struct mmc_omap_host *host, struct mmc_data *data,
+		     int abort)
+{
+	enum dma_data_direction dma_data_dir;
+
+	BUG_ON(host->dma_ch < 0);
+	if (abort)
+		omap_stop_dma(host->dma_ch);
+	/* Release DMA channel lazily */
+	mod_timer(&host->dma_timer, jiffies + HZ);
+	if (data->flags & MMC_DATA_WRITE)
+		dma_data_dir = DMA_TO_DEVICE;
+	else
+		dma_data_dir = DMA_FROM_DEVICE;
+	dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
+		     dma_data_dir);
+}
+
+static void
 mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 {
-	if (host->dma_in_use) {
-		enum dma_data_direction dma_data_dir;
-
-		BUG_ON(host->dma_ch < 0);
-		if (data->error != MMC_ERR_NONE)
-			omap_stop_dma(host->dma_ch);
-		/* Release DMA channel lazily */
-		mod_timer(&host->dma_timer, jiffies + HZ);
-		if (data->flags & MMC_DATA_WRITE)
-			dma_data_dir = DMA_TO_DEVICE;
-		else
-			dma_data_dir = DMA_FROM_DEVICE;
-		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
-			     dma_data_dir);
-	}
+	if (host->dma_in_use)
+		mmc_omap_release_dma(host, data, data->error != MMC_ERR_NONE);
+
 	host->data = NULL;
 	host->sg_len = 0;
-	clk_disable(host->fclk);
 
 	/* NOTE:  MMC layer will sometimes poll-wait CMD13 next, issuing
 	 * dozens of requests until the card finishes writing data.
@@ -370,8 +376,12 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 	 */
 
 	if (!data->stop) {
+		struct mmc_host *mmc;
+
 		host->mrq = NULL;
-		mmc_request_done(host->mmc, data->mrq);
+		mmc = host->mmc;
+		mmc_omap_release_slot(host->current_slot);
+		mmc_request_done(mmc, data->mrq);
 		return;
 	}
 
@@ -379,6 +389,32 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 }
 
 static void
+mmc_omap_abort_xfer(struct mmc_omap_host *host, struct mmc_data *data)
+{
+	int loops;
+	u16 ie;
+
+	if (host->dma_in_use)
+		mmc_omap_release_dma(host, data, 1);
+
+	host->data = NULL;
+	host->sg_len = 0;
+
+	ie = OMAP_MMC_READ(host, IE);
+	OMAP_MMC_WRITE(host, IE, 0);
+	OMAP_MMC_WRITE(host, CMD, 1 << 7);
+	loops = 0;
+	while (!(OMAP_MMC_READ(host, STAT) & OMAP_MMC_STAT_END_OF_CMD)) {
+		udelay(1);
+		loops++;
+		if (loops == 100000)
+			break;
+	}
+	OMAP_MMC_WRITE(host, STAT, OMAP_MMC_STAT_END_OF_CMD);
+	OMAP_MMC_WRITE(host, IE, ie);
+}
+
+static void
 mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data)
 {
 	unsigned long flags;
@@ -455,9 +491,14 @@ mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
 	}
 
 	if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
+		struct mmc_host *mmc;
+
+		if (host->data != NULL)
+			mmc_omap_abort_xfer(host, host->data);
 		host->mrq = NULL;
-		clk_disable(host->fclk);
-		mmc_request_done(host->mmc, cmd->mrq);
+		mmc = host->mmc;
+		mmc_omap_release_slot(host->current_slot);
+		mmc_request_done(mmc, cmd->mrq);
 	}
 }
 
-- 1.5.3.GIT

                 reply	other threads:[~2007-09-20 15:03 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=46F28BAD.7060904@indt.org.br \
    --to=carlos.aguiar@indt.org.br \
    --cc=linux-omap-open-source@linux.omap.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.