Re: [Xenomai-help] Comedi driver for use with xenomai

[Anders Blomdell <anders.blomdell@domain.hid>]

Leopold Palomo-Avellaneda wrote:
> A Divendres 21 Setembre 2007 10:43, Anders Blomdell va escriure:
>> Leopold Palomo Avellaneda wrote:
>>> A Divendres 21 Setembre 2007 00:36, Alexis Berlemont va escriure:
>>>> Which driver is it ?
>>> the jr3_pci. It's a pci card, with a dsp to read the signal from a force
>>> sensor.
>>> http://www.comedi.org/cgi-bin/viewcvs.cgi/comedi/comedi/drivers/jr3_pci.c
>>> ?rev=1.5&view=log
>> After October 20 and Alexis gets some real drivers ported to his new
>> framework, I can take a look at it.
> 
> I'm sorry, but I don't understand the sentence. Well, I understand that I have 
> to wait at last to middle of November? No problem. My system now it too 
> complex to me to need it immediately. I just ask it to take one way or 
> another.
20 October is due to other projects that will occupy me until then.
I'll also need some working examples from Alexis before I'll invest time in this
project (it's so much easier to modify an existing driver than to write one from
scratch).

Regards

Anders

-- 
Anders Blomdell                  Email: anders.blomdell@domain.hid
Department of Automatic Control
Lund University                  Phone:    +46 46 222 4625
P.O. Box 118                     Fax:      +46 46 138118
SE-221 00 Lund, Sweden