From: Michael Schon <michael.schon@andromedacomm.com>
To: linux-acpi@vger.kernel.org
Subject: dmidecode from Slackware 12.0 on Notebook HP Pavilion dv6000
Date: Mon, 24 Sep 2007 07:33:16 -0300 [thread overview]
Message-ID: <46F7926C.8010901@andromedacomm.com> (raw)
In-Reply-To: <46F65F48.3070600@andromedacomm.com>
root@slack:~# dmidecode
> # dmidecode 2.9
> SMBIOS 2.4 present.
> 20 structures occupying 720 bytes.
> Table at 0x000F1F00.
>
> Handle 0x0000, DMI type 0, 24 bytes
> BIOS Information
> Vendor: Hewlett-Packard
> Version: F.26
> Release Date: 12/29/2006
> Address: 0xE6D00
> Runtime Size: 103168 bytes
> ROM Size: 1024 kB
> Characteristics:
> ISA is supported
> PCI is supported
> PNP is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> ESCD support is available
> Boot from CD is supported
> Selectable boot is supported
> Print screen service is supported (int 5h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> Printer services are supported (int 17h)
> ACPI is supported
> USB legacy is supported
> AGP is supported
> Smart battery is supported
> BIOS boot specification is supported
> Targeted content distribution is supported
>
> Handle 0x0001, DMI type 1, 27 bytes
> System Information
> Manufacturer: Hewlett-Packard
> Product Name: HP Pavilion dv6000 (RK415AV)
> Version: Rev 1
> Serial Number: BRB70907PY
> UUID: 42524237-3039-3037-5059-0019BBF8B1E9
> Wake-up Type: Power Switch
> SKU Number: RK415AV)
> Family: 103C_5335KV
>
> Handle 0x0002, DMI type 2, 8 bytes
> Base Board Information
> Manufacturer: Quanta
> Product Name: 30B7
> Version: 65.27
> Serial Number: None
>
> Handle 0x0003, DMI type 3, 17 bytes
> Chassis Information
> Manufacturer: Quanta
> Type: Notebook
> Lock: Not Present
> Version: N/A
> Serial Number: None
> Asset Tag: BRB70907PY
> Boot-up State: Safe
> Power Supply State: Safe
> Thermal State: Safe
> Security Status: None
> OEM Information: 0x00001234
>
> Handle 0x0004, DMI type 4, 35 bytes
> Processor Information
> Socket Designation: Socket S1
> Type: Central Processor
> Family: Opteron
> Manufacturer: AMD
> ID: C2 0F 04 00 FF FB 8B 07
> Signature: Family 15, Model 76, Stepping 2
> Flags:
> FPU (Floating-point unit on-chip)
> VME (Virtual mode extension)
> DE (Debugging extension)
> PSE (Page size extension)
> TSC (Time stamp counter)
> MSR (Model specific registers)
> PAE (Physical address extension)
> MCE (Machine check exception)
> CX8 (CMPXCHG8 instruction supported)
> APIC (On-chip APIC hardware supported)
> SEP (Fast system call)
> MTRR (Memory type range registers)
> PGE (Page global enable)
> MCA (Machine check architecture)
> CMOV (Conditional move instruction supported)
> PAT (Page attribute table)
> PSE-36 (36-bit page size extension)
> CLFSH (CLFLUSH instruction supported)
> MMX (MMX technology supported)
> FXSR (Fast floating-point save and restore)
> SSE (Streaming SIMD extensions)
> SSE2 (Streaming SIMD extensions 2)
> Version: Mobile AMD Sempron(tm) Processor
> Voltage: 1.6 V
> External Clock: 200 MHz
> Max Speed: 1800 MHz
> Current Speed: 1800 MHz
> Status: Populated, Enabled
> Upgrade: None
> L1 Cache Handle: 0x0005
> L2 Cache Handle: 0x0006
> L3 Cache Handle: Not Provided
> Serial Number: Not Specified
> Asset Tag: Not Specified
> Part Number: Not Specified
>
> Handle 0x0005, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: L1 Cache
> Configuration: Enabled, Not Socketed, Level 1
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 64 KB
> Maximum Size: 64 KB
> Supported SRAM Types:
> Burst
> Pipeline Burst
> Asynchronous
> Installed SRAM Type: Asynchronous
> Speed: Unknown
> Error Correction Type: Unknown
> System Type: Unknown
> Associativity: Unknown
>
> Handle 0x0006, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: L2 Cache
> Configuration: Enabled, Not Socketed, Level 2
> Operational Mode: Write Through
> Location: Internal
> Installed Size: 256 KB
> Maximum Size: 256 KB
> Supported SRAM Types:
> Burst
> Pipeline Burst
> Synchronous
> Installed SRAM Type: Synchronous
> Speed: Unknown
> Error Correction Type: Unknown
> System Type: Unified
> Associativity: Unknown
>
> Handle 0x0007, DMI type 9, 13 bytes
> System Slot Information
> Designation: PCI Express Slot 1
> Type: 64-bit PCI Express
> Current Usage: Available
> Length: Short
> ID: 0
> Characteristics:
> 5.0 V is provided
> 3.3 V is provided
>
> Handle 0x0008, DMI type 9, 13 bytes
> System Slot Information
> Designation: PCI Express Slot 2
> Type: 64-bit PCI Express
> Current Usage: Available
> Length: Short
> ID: 0
> Characteristics:
> 5.0 V is provided
> 3.3 V is provided
> PME signal is supported
> Hot-plug devices are supported
>
> Handle 0x0009, DMI type 10, 6 bytes
> On Board Device Information
> Type: Video
> Status: Enabled
> Description: 64
>
> Handle 0x000A, DMI type 11, 5 bytes
> OEM Strings
> String 1: $HP$
>
> Handle 0x000B, DMI type 15, 29 bytes
> System Event Log
> Area Length: 16 bytes
> Header Start Offset: 0x0000
> Header Length: 16 bytes
> Data Start Offset: 0x0010
> Access Method: General-purpose non-volatile data functions
> Access Address: 0x0000
> Status: Invalid, Not Full
> Change Token: 0x00000000
> Header Format: Type 1
> Supported Log Type Descriptors: 3
> Descriptor 1: POST error
> Data Format 1: POST results bitmap
> Descriptor 2: Single-bit ECC memory error
> Data Format 2: Multiple-event
> Descriptor 3: Multi-bit ECC memory error
> Data Format 3: Multiple-event
>
> Handle 0x000C, DMI type 16, 15 bytes
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: None
> Maximum Capacity: 2 GB
> Error Information Handle: Not Provided
> Number Of Devices: 2
>
> Handle 0x000D, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x000C
> Error Information Handle: No Error
> Total Width: Unknown
> Data Width: Unknown
> Size: No Module Installed
> Form Factor: DIMM
> Set: 1
> Locator: DIMM 1
> Bank Locator: Bank 0,1
> Type: Unknown
> Type Detail: Unknown
> Speed: Unknown
> Manufacturer: Not Specified
> Serial Number: Not Specified
> Asset Tag: Not Specified
> Part Number: Not Specified
>
> Handle 0x000E, DMI type 17, 27 bytes
> Memory Device
> Array Handle: 0x000C
> Error Information Handle: No Error
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 512 MB
> Form Factor: DIMM
> Set: 1
> Locator: DIMM 2
> Bank Locator: Bank 2,3
> Type: DDR2
> Type Detail: Unknown
> Speed: 667 MHz (1.5 ns)
> Manufacturer: Not Specified
> Serial Number: Not Specified
> Asset Tag: Not Specified
> Part Number: Not Specified
>
> Handle 0x000F, DMI type 19, 15 bytes
> Memory Array Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0001FFFFFFF
> Range Size: 512 MB
> Physical Array Handle: 0x000C
> Partition Width: 0
>
> Handle 0x0010, DMI type 20, 19 bytes
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x000000007FF
> Range Size: 2 kB
> Physical Device Handle: 0x000D
> Memory Array Mapped Address Handle: 0x000F
> Partition Row Position: 2
> Interleave Position: 2
> Interleaved Data Depth: 2
>
> Handle 0x0011, DMI type 20, 19 bytes
> Memory Device Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x0001FFFFFFF
> Range Size: 512 MB
> Physical Device Handle: 0x000E
> Memory Array Mapped Address Handle: 0x000F
> Partition Row Position: 2
> Interleave Position: 2
> Interleaved Data Depth: 2
>
> Handle 0x0012, DMI type 32, 20 bytes
> System Boot Information
> Status: <OUT OF SPEC>
>
> Handle 0x0013, DMI type 127, 4 bytes
> End Of Table
next parent reply other threads:[~2007-09-24 10:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <46F65F48.3070600@andromedacomm.com>
2007-09-24 10:33 ` Michael Schon [this message]
2008-01-19 4:14 ` dmidecode from Slackware 12.0 on Notebook HP Pavilion dv6000 - 30B7 Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F7926C.8010901@andromedacomm.com \
--to=michael.schon@andromedacomm.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.