From: "Berck E. Nash" <flyboy@gmail.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot
Date: Tue, 25 Sep 2007 20:25:58 -0600 [thread overview]
Message-ID: <46F9C336.3010005@gmail.com> (raw)
In-Reply-To: <46F9B3FE.1060905@garzik.org>
[-- Attachment #1: Type: text/plain, Size: 200 bytes --]
Jeff Garzik wrote:
> Does the attached patch change behavior at all? You should be able to
> apply it on top of libata-dev.git#upstream or -mm.
Still broken, dmesg with ATA_DEBUG defined, attached.
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 77744 bytes --]
[ 0.000000] Linux version 2.6.23-rc8-mm1 (root@luna) (gcc version 4.2.1 (Debian 4.2.1-5)) #1 SMP Tue Sep 25 20:11:10 MDT 2007
[ 0.000000] Command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff80000 (usable)
[ 0.000000] BIOS-e820: 000000003ff80000 - 000000003ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff8e000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FAF20, 0024 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 3FF80100, 0064 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: FACP 3FF80290, 00F4 (r3 A_M_I_ OEMFACP 3000707 MSFT 97)
[ 0.000000] ACPI: DSDT 3FF80590, 9560 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 3FF8E000, 0040
[ 0.000000] ACPI: APIC 3FF80390, 0080 (r1 A_M_I_ OEMAPIC 3000707 MSFT 97)
[ 0.000000] ACPI: SLIC 3FF80410, 0176 (r1 NEC 3000707 MSFT 97)
[ 0.000000] ACPI: OEMB 3FF8E040, 0066 (r1 A_M_I_ AMI_OEM 3000707 MSFT 97)
[ 0.000000] ACPI: HPET 3FF89AF0, 0038 (r1 A_M_I_ OEMHPET 3000707 MSFT 97)
[ 0.000000] ACPI: MCFG 3FF89B30, 003C (r1 A_M_I_ OEMMCFG 3000707 MSFT 97)
[ 0.000000] ACPI: SSDT 3FF8E0B0, 01C6 (r1 AMI CPU1PM 1 INTL 20060113)
[ 0.000000] ACPI: SSDT 3FF8E280, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262016
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb00000)
[ 0.000000] .eh_frame_hdr for 'kernel' present but unusable
[ 0.000000] PERCPU: Allocating 28328 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257187
[ 0.000000] Kernel command line: root=/dev/sde1 ro console=tty0 console=ttyS0,115200n8 BOOT_IMAGE=vmlinuz
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against HPET
[ 0.000000] time.c: Detected 2564.906 MHz processor.
[ 0.006666] Console: colour VGA+ 80x25
[ 0.006666] console [tty0] enabled
[ 0.009999] console [ttyS0] enabled
[ 0.013333] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.016666] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.019999] Checking aperture...
[ 0.029999] Memory: 1026692k/1048064k available (2448k kernel code, 20804k reserved, 1590k data, 224k init)
[ 0.116666] Calibrating delay using timer specific routine.. 5134.53 BogoMIPS (lpj=8554463)
[ 0.123333] Mount-cache hash table entries: 256
[ 0.129999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.133333] CPU: L2 cache: 2048K
[ 0.136666] using mwait in idle threads.
[ 0.139999] CPU: Physical Processor ID: 0
[ 0.143333] CPU: Processor Core ID: 0
[ 0.146666] CPU0: Thermal monitoring enabled (TM2)
[ 0.149999] Freeing SMP alternatives: 27k freed
[ 0.153333] ACPI: Core revision 20070126
[ 0.196666] Using local APIC timer interrupts.
[ 0.203333] Detected 22.900 MHz APIC timer.
[ 0.206666] Booting processor 1/2 APIC 0x1
[ 0.219999] Initializing CPU#1
[ 0.303333] Calibrating delay using timer specific routine.. 5131.57 BogoMIPS (lpj=8549719)
[ 0.303333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.303333] CPU: L2 cache: 2048K
[ 0.303333] CPU: Physical Processor ID: 0
[ 0.303333] CPU: Processor Core ID: 1
[ 0.303333] CPU1: Thermal monitoring enabled (TM2)
[ 0.303333] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 0.303333] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.306666] Brought up 2 CPUs
[ 0.309999] net_namespace: 112 bytes
[ 0.313531] NET: Registered protocol family 16
[ 0.318112] ACPI: bus type pci registered
[ 0.322207] PCI: Using configuration type 1
[ 0.337398] ACPI: Interpreter enabled
[ 0.341098] ACPI: Using IOAPIC for interrupt routing
[ 0.346136] PCI: MCFG configuration 0: base 4026531840 segment 0 buses 0 - 63
[ 0.355363] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.363718] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.374808] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.379945] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.386433] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.392739] PCI: Transparent bridge - 0000:00:1e.0
[ 0.400270] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.407971] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.415675] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.423374] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.431067] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.438758] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.451973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.459665] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.467354] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 1B, should be 12 [20070126]
[ 0.477153] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.482867] pnp: PnP ACPI init
[ 0.485963] ACPI: bus type pnp registered
[ 0.492544] pnp: PnP ACPI: found 15 devices
[ 0.496765] ACPI: ACPI bus type pnp unregistered
[ 0.501556] SCSI subsystem initialized
[ 0.505409] PCI: Using ACPI for IRQ routing
[ 0.509635] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.531058] DMAR:No DMAR devices found
[ 0.534852] PCI-GART: No AMD northbridge found.
[ 0.539423] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.544509] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.551056] Time: tsc clocksource has been installed.
[ 0.556149] Switched to high resolution mode on CPU 1
[ 0.556152] Switched to high resolution mode on CPU 0
[ 0.571142] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.578140] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 0.584355] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.591351] pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.598350] pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.605348] pnp: 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.612707] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.619701] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.627058] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.634055] pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.640531] pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved
[ 0.647009] pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.653827] pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.661200] PCI: Bridge: 0000:00:01.0
[ 0.664902] IO window: disabled.
[ 0.668341] MEM window: faa00000-feafffff
[ 0.672557] PREFETCH window: cff00000-efefffff
[ 0.677210] PCI: Bridge: 0000:00:1c.0
[ 0.680907] IO window: disabled.
[ 0.684347] MEM window: disabled.
[ 0.687872] PREFETCH window: cfe00000-cfefffff
[ 0.692524] PCI: Bridge: 0000:00:1c.3
[ 0.696222] IO window: c000-cfff
[ 0.699955] MEM window: fa900000-fa9fffff
[ 0.704174] PREFETCH window: disabled.
[ 0.708132] PCI: Bridge: 0000:00:1c.5
[ 0.711830] IO window: b000-bfff
[ 0.715269] MEM window: fa800000-fa8fffff
[ 0.719488] PREFETCH window: disabled.
[ 0.723446] PCI: Bridge: 0000:00:1e.0
[ 0.727144] IO window: a000-afff
[ 0.730583] MEM window: fa600000-fa7fffff
[ 0.734800] PREFETCH window: 50000000-500fffff
[ 0.739459] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.746952] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.754445] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.761939] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.769452] NET: Registered protocol family 2
[ 0.804350] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.811710] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[ 0.820186] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.827405] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.834057] TCP reno registered
[ 0.845147] audit: initializing netlink socket (disabled)
[ 0.850593] audit(1190751453.800:1): initialized
[ 0.855405] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.862753] io scheduler noop registered
[ 0.866727] io scheduler cfq registered (default)
[ 0.872372] assign_interrupt_mode Found MSI capability
[ 0.877636] assign_interrupt_mode Found MSI capability
[ 0.882944] assign_interrupt_mode Found MSI capability
[ 0.888226] assign_interrupt_mode Found MSI capability
[ 0.893583] input: Power Button (FF) as /class/input/input0
[ 0.899191] ACPI: Power Button (FF) [PWRF]
[ 0.903393] input: Power Button (CM) as /class/input/input1
[ 0.909004] ACPI: Power Button (CM) [PWRB]
[ 0.913359] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._OSC] (Node ffff810002057b30), AE_ALREADY_EXISTS
[ 0.925187] ACPI: Marking method _OSC as Serialized
[ 0.930227] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810002057b50), AE_ALREADY_EXISTS
[ 0.942060] ACPI: Marking method _PDC as Serialized
[ 0.947284] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.953680] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._OSC] (Node ffff810002057a10), AE_ALREADY_EXISTS
[ 0.965508] ACPI: Marking method _OSC as Serialized
[ 0.970543] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810002057a30), AE_ALREADY_EXISTS
[ 0.982371] ACPI: Marking method _PDC as Serialized
[ 0.987582] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 1.021742] Real Time Clock Driver v1.12ac
[ 1.026375] intel_rng: FWH not detected
[ 1.030595] Linux agpgart interface v0.102
[ 1.034742] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 1.042728] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.049102] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.054977] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1.272479] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 1.272480] <Adaptec 2940 Ultra2 SCSI adapter>
[ 1.272481] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
[ 1.272482]
[ 1.293422] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 1.301271] ata_host_alloc: ENTER
[ 1.304634] ata_port_alloc: ENTER
[ 1.307989] ata_port_alloc: ENTER
[ 1.311343] ata_port_alloc: ENTER
[ 1.314704] ata_port_alloc: ENTER
[ 1.553158] scsi 0:0:1:0: Direct-Access IBM-PCCO ST39102LC !# B219 PQ: 0 ANSI: 2
[ 1.561296] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 1.566782] target0:0:1: Beginning Domain Validation
[ 1.578308] target0:0:1: wide asynchronous
[ 1.587229] target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.598475] target0:0:1: Domain Validation skipping write tests
[ 1.604520] target0:0:1: Ending Domain Validation
[ 1.612367] scsi 0:0:2:0: Direct-Access SGI SEAGATE ST39102L 2702 PQ: 0 ANSI: 2
[ 1.620506] scsi0:A:2:0: Tagged Queuing enabled. Depth 8
[ 1.625990] target0:0:2: Beginning Domain Validation
[ 1.636363] target0:0:2: wide asynchronous
[ 1.644463] target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 15)
[ 1.654889] target0:0:2: Domain Validation skipping write tests
[ 1.660932] target0:0:2: Ending Domain Validation
[ 2.316829] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.324959] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.331805] __ata_port_freeze: ata4294967295 port frozen
[ 2.337168] __ata_port_freeze: ata4294967295 port frozen
[ 2.342539] __ata_port_freeze: ata4294967295 port frozen
[ 2.347909] __ata_port_freeze: ata4294967295 port frozen
[ 2.353278] scsi1 : ahci
[ 2.355887] scsi2 : ahci
[ 2.358500] scsi3 : ahci
[ 2.361107] scsi4 : ahci
[ 2.363708] ata1: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb900 irq 315
[ 2.371238] ata2: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfb980 irq 315
[ 2.378762] ata3: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba00 irq 315
[ 2.386290] ata4: SATA max UDMA/133 abar m1024@0xfebfb800 port 0xfebfba80 irq 315
[ 2.393817] ata_host_register: probe begin
[ 2.397952] ata_port_schedule_eh: port EH scheduled
[ 2.402872] ata_scsi_error: ENTER
[ 2.406223] ata_port_flush_task: ENTER
[ 2.410011] ata_eh_link_autopsy: ENTER
[ 2.413794] ata_eh_recover: ENTER
[ 2.417145] __ata_port_freeze: ata1 port frozen
[ 2.733272] ahci_do_softreset: ENTER
[ 2.896512] ata_dev_classify: found ATA device by sig
[ 2.901597] ahci_do_softreset: EXIT, class=1
[ 2.905901] ata_std_postreset: ENTER
[ 2.909513] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.915725] ata_std_postreset: EXIT
[ 2.919248] ata_eh_thaw_port: ata1 port thawed
[ 2.923727] ata_eh_revalidate_and_attach: ENTER
[ 2.928314] ata_sg_setup: 1 sg elements mapped
[ 2.933522] ata_port_flush_task: ENTER
[ 2.937369] ata_port_flush_task: ENTER
[ 2.941155] ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
[ 2.946760] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.953660] ata_dev_set_xfermode: set features - xfer mode
[ 2.959279] ata_port_flush_task: ENTER
[ 2.963069] ata_dev_set_xfermode: EXIT, err_mask=0
[ 2.967914] ata_sg_setup: 1 sg elements mapped
[ 2.973100] ata_port_flush_task: ENTER
[ 2.976950] ata_port_flush_task: ENTER
[ 2.980738] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 2.991591] ata1.00: configured for UDMA/133
[ 2.995896] ata_eh_recover: EXIT, rc=0
[ 2.999680] ata_scsi_error: EXIT
[ 3.002946] ata_port_schedule_eh: port EH scheduled
[ 3.002947] ata_scsi_error: ENTER
[ 3.002949] ata_port_flush_task: ENTER
[ 3.014992] ata_eh_link_autopsy: ENTER
[ 3.018779] ata_eh_recover: ENTER
[ 3.022130] __ata_port_freeze: ata2 port frozen
[ 3.339623] ahci_do_softreset: ENTER
[ 3.502887] ata_dev_classify: fod_ ATA device by sig
[ 3.507977] ahci_do_softreset: EXIT, class=1
[ 3.512280] ata_std_postreset: ENTER
[ 3.515893] ata2: SATA link up 3.0 Gbps (SStatus 123 SCont 3300)
[ 3.522105] ata_std_postreset: EXIT
[ 3.525628] ata_eh_thaw_port: ata2 port thawed
[ 3.530106] ata_eh_revalidate_an_0attach: ENTER
[ 3.534695] ata_sg_setup: 1 sg elements mapped
[ 4.751938] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.760821] sd 0:0:1:0: [sda] Write Protect is off
[ 4.767221] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.776605] sd 0:0:1:0: [sda] 17774160 512-byte hardware sectors (9100 MB)
[ 4.785488] sd 0:0:1:0: [sda] Write Protect is off
[ 4.791900] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.800470] sda: sda1 sda2
[ 4.811450] sd 0:0:1:0: [sda] Attached SCSI disk
[ 4.816162] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 4.822332] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.832615] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.841211] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.850578] sd 0:0:2:0: [sdb] 17781520 512-byte hardware sectors (9104 MB)
[ 4.860855] sd 0:0:2:0: [sdb] Write Protect is off
[ 4.869451] sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 4.878017] sdb: sdb1
[ 4.890330] sd 0:0:2:0: [sdb] Attached SCSI disk
[ 4.895028] sd 0:0:2:0: Attached scsi generic sg1 type 0
[ 33.520602] ata_port_flush_task: ENTER
[ 33.524392] __ata_port_freeze: ata2 port frozen
[ 33.528953] ata2.00: qc timeout (cmd 0xec)
[ 33.533087] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 33.539210] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 33.544207] ata2: failed to recover some devices, retrying in 5 secs
[ 38.551318] __ata_port_freeze: ata2 port frozen
[ 38.555888] ahci_hardreset: ENTER
[ 38.559240] sata_std_hardreset: ENTER
[ 38.562937] sata_link_hardreset: ENTER
[ 38.884474] sata_link_hardreset: EXIT, rc=0
[ 44.051785] ata2: port is slow to respond, please be patient (Status 0x80)
[ 48.589425] ata2: COMRESET failed (errno=-16)
[ 48.593817] ahci_hardreset: EXIT, rc=-16, class=5
[ 48.598554] ahci_hardreset: ENTER
[ 48.601905] sata_std_hardreset: ENTER
[ 48.605604] sata_link_hardreset: ENTER
[ 48.925920] sata_link_hardreset: EXIT, rc=0
[ 49.295725] ata_dev_classify: found ATA device by sig
[ 49.300810] sata_std_hardreset: EXIT, class=1
[ 49.305201] ata_dev_classify: found ATA device by sig
[ 49.310285] ahci_hardreset: EXIT, rc=0, class=1
[ 49.314849] ata_std_postreset: ENTER
[ 49.318461] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.324673] ata_std_postreset: EXIT
[ 49.328196] ata_eh_thaw_port: ata2 port thawed
[ 49.332674] ata_eh_revalidate_and_attach: ENTER
[ 49.337262] ata_sg_setup: 1 sg elements mapped
[ 49.341772] ata_port_flush_task: ENTER
[ 49.345571] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 49.351609] ata2.00: 640 sectors, multi 1: LBA
[ 49.356173] ata_dev_set_xfermode: set features - xfer mode
[ 49.361710] ata_port_flush_task: ENTER
[ 49.365493] ata_dev_set_xfermode: EXIT, err_mask=0
[ 49.370341] ata_sg_setup: 1 sg elements mapped
[ 49.374850] ata_port_flush_task: ENTER
[ 49.378639] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 49.384246] ata2.00: configured for UDMA/133
[ 49.388549] ata_eh_recover: EXIT, rc=0
[ 49.392337] ata_eh_link_autopsy: ENTER
[ 49.396120] ata_eh_link_autopsy: EXIT
[ 49.399817] ata_eh_recover: ENTER
[ 49.403169] ata_eh_revalidate_and_attach: ENTER
[ 49.407734] ata_eh_recover: EXIT, rc=0
[ 49.411522] ata_scsi_error: EXIT
[ 49.422330] ata_port_schedule_eh: port EH scheduled
[ 49.427244] ata_scsi_error: ENTER
[ 49.430592] ata_port_flush_task: ENTER
[ 49.434378] ata_eh_link_autopsy: ENTER
[ 49.438163] ata_eh_recover: ENTER
[ 49.441516] __ata_port_freeze: ata3 port frozen
[ 49.758820] ahci_do_softreset: ENTER
[ 49.922059] ata_dev_classify: found ATA device by sig
[ 49.927144] ahci_do_softreset: EXIT, class=1
[ 49.931450] ata_std_postreset: ENTER
[ 49.935060] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 49.941272] ata_std_postreset: EXIT
[ 49.944795] ata_eh_thaw_port: ata3 port thawed
[ 49.949273] ata_eh_revalidate_and_attach: ENTER
[ 49.953861] ata_sg_setup: 1 sg elements mapped
[ 49.960662] ata_port_flush_task: ENTER
[ 49.965491] ata_port_flush_task: ENTER
[ 49.969276] ata3.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133
[ 49.975833] ata3.00: 72303840 sectors, multi 16: LBA48
[ 49.981088] ata_dev_set_xfermode: set features - xfer mode
[ 49.987646] ata_port_flush_task: ENTER
[ 49.991430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 49.996278] ata_sg_setup: 1 sg elements mapped
[ 50.003075] ata_port_flush_task: ENTER
[ 50.007870] ata_port_flush_task: ENTER
[ 50.011657] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 50.017259] ata3.00: configured for UDMA/133
[ 50.021564] ata_eh_recover: EXIT, rc=0
[ 50.025349] ata_scsi_error: EXIT
[ 50.028613] ata_port_schedule_eh: port EH scheduled
[ 50.029498] ata_scsi_error: ENTER
[ 50.029499] ata_port_flush_task: ENTER
[ 50.040660] ata_eh_link_autopsy: ENTER
[ 50.044448] ata_eh_recover: ENTER
[ 50.047799] __ata_port_freeze: ata4 port frozen
[ 50.365172] ahci_do_softreset: ENTER
[ 50.528411] ata_dev_classify: found ATAPI device by sig
[ 50.533670] ahci_do_softreset: EXIT, class=3
[ 50.537976] ata_std_postreset: ENTER
[ 50.541588] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 50.547800] ata_std_postreset: EXIT
[ 50.551333] ata_eh_thaw_port: ata4 port thawed
[ 50.555809] ata_eh_revalidate_and_attach: ENTER
[ 50.711667] ata_sg_setup: 1 sg elements mapped
[ 50.716623] ata_port_flush_task: ENTER
[ 50.720423] ata4.00: ATAPI: Optiarc DVD RW AD-7170S, 1.00, max UDMA/66
[ 50.726983] ata_dev_set_xfermode: set features - xfer mode
[ 50.732645] ata_port_flush_task: ENTER
[ 50.736430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 50.891575] ata_sg_setup: 1 sg elements mapped
[ 50.896532] ata_port_flush_task: ENTER
[ 50.900325] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x44
[ 50.905928] ata4.00: configured for UDMA/66
[ 50.910146] ata_eh_recover: EXIT, rc=0
[ 50.913931] ata_scsi_error: EXIT
[ 50.924880] ata_host_register: host probe begin
[ 50.929464] ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 24 00 00 00 00
[ 50.936130] ata_scsi_dump_cdb: CDB (1:0,0,0) 12 00 00 00 60 00 00 00 00
[ 50.942788] scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
[ 50.950993] ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 00
[ 50.957784] ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
[ 50.964435] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 50.971605] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
[ 50.978256] sd 1:0:0:0: [sdc] Write Protect is off
[ 50.983088] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
[ 50.989743] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24
[ 50.996395] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.005495] ata_scsi_dump_cdb: CDB (1:0,0,0) 00 00 00 00 00 00 00 00 24
[ 51.012196] ata_scsi_dump_cdb: CDB (1:0,0,0) 25 00 00 00 00 00 00 00 00
[ 51.018847] sd 1:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 51.026016] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 3f 00 00 00 00 00 08
[ 51.032669] sd 1:0:0:0: [sdc] Write Protect is off
[ 51.037502] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 08
[ 51.044155] ata_scsi_dump_cdb: CDB (1:0,0,0) 5a 00 08 00 00 00 00 00 24
[ 51.050806] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 51.059894] sdc:<3>ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 00 00 00 00 08
[ 51.067292] ata_sg_setup: 1 sg elements mapped
[ 51.089928] sdc1 sdc2
[ 51.092504] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 51.097208] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 51.102573] ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 24 00 00 00 00
[ 51.109231] ata_scsi_dump_cdb: CDB (2:0,0,0) 12 00 00 00 60 00 00 00 00
[ 51.115889] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 51.124126] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.130784] ata_scsi_timed_out: ENTER
[ 51.134485] ata_scsi_timed_out: EXIT, ret=0
[ 51.138706] ata_scsi_error: ENTER
[ 51.142058] ata_port_flush_task: ENTER
[ 51.145849] ata_eh_link_autopsy: ENTER
[ 51.149639] ata_eh_link_autopsy: EXIT
[ 51.158588] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.165065] ata2.00: irq_stat 0x40000001
[ 51.169023] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.169024] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.184496] ata2.00: status: {DRDY ERR }
[ 51.188458] ata2.00: error: {ABRT }
[ 51.191982] ata_eh_recover: ENTER
[ 51.195335] ata_eh_revalidate_and_attach: ENTER
[ 51.199923] ata_sg_setup: 1 sg elements mapped
[ 51.204434] ata_port_flush_task: ENTER
[ 51.208234] ata_dev_set_xfermode: set features - xfer mode
[ 51.213770] ata_port_flush_task: ENTER
[ 51.217555] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.222400] ata_sg_setup: 1 sg elements mapped
[ 51.226910] ata_port_flush_task: ENTER
[ 51.230699] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.236306] ata2.00: configured for UDMA/133
[ 51.240611] ata_eh_recover: EXIT, rc=0
[ 51.244397] ata2: EH complete
[ 51.247401] ata_scsi_error: EXIT
[ 51.250666] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.257319] ata_scsi_timed_out: ENTER
[ 51.261017] ata_scsi_timed_out: EXIT, ret=0
[ 51.265238] ata_scsi_error: ENTER
[ 51.268586] ata_port_flush_task: ENTER
[ 51.272374] ata_eh_link_autopsy: ENTER
[ 51.276156] ata_eh_link_autopsy: EXIT
[ 51.279857] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.286329] ata2.00: irq_stat 0x40000001
[ 51.290286] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.290287] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.305758] ata2.00: status: {DRDY ERR }
[ 51.309721] ata2.00: error: {ABRT }
[ 51.313245] ata_eh_recover: ENTER
[ 51.316597] ata_eh_revalidate_and_attach: ENTER
[ 51.321185] ata_sg_setup: 1 sg elements mapped
[ 51.325695] ata_port_flush_task: ENTER
[ 51.329488] ata_dev_set_xfermode: set features - xfer mode
[ 51.335023] ata_port_flush_task: ENTER
[ 51.338808] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.343653] ata_sg_setup: 1 sg elements mapped
[ 51.348163] ata_port_flush_task: ENTER
[ 51.351955] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.357563] ata2.00: configured for UDMA/133
[ 51.361872] ata_eh_recover: EXIT, rc=0
[ 51.365657] ata2: EH complete
[ 51.368659] ata_scsi_error: EXIT
[ 51.371929] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.378581] ata_scsi_timed_out: ENTER
[ 51.382279] ata_scsi_timed_out: EXIT, ret=0
[ 51.386500] ata_scsi_error: ENTER
[ 51.389848] ata_port_flush_task: ENTER
[ 51.393636] ata_eh_link_autopsy: ENTER
[ 51.397419] ata_eh_link_autopsy: EXIT
[ 51.401118] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.407590] ata2.00: irq_stat 0x40000001
[ 51.411547] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.411548] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.427020] ata2.00: status: {DRDY ERR }
[ 51.430982] ata2.00: error: {ABRT }
[ 51.434508] ata_eh_recover: ENTER
[ 51.437858] ata_eh_revalidate_and_attach: ENTER
[ 51.442448] ata_sg_setup: 1 sg elements mapped
[ 51.446959] ata_port_flush_task: ENTER
[ 51.450758] ata_dev_set_xfermode: set features - xfer mode
[ 51.456294] ata_port_flush_task: ENTER
[ 51.460079] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.464924] ata_sg_setup: 1 sg elements mapped
[ 51.469434] ata_port_flush_task: ENTER
[ 51.473225] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.478832] ata2.00: configured for UDMA/133
[ 51.483134] ata_eh_recover: EXIT, rc=0
[ 51.486921] ata2: EH complete
[ 51.489924] ata_scsi_error: EXIT
[ 51.493190] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.499842] ata_scsi_timed_out: ENTER
[ 51.503540] ata_scsi_timed_out: EXIT, ret=0
[ 51.507761] ata_scsi_error: ENTER
[ 51.511111] ata_port_flush_task: ENTER
[ 51.514899] ata_eh_link_autopsy: ENTER
[ 51.518683] ata_eh_link_autopsy: EXIT
[ 51.522380] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.528853] ata2.00: irq_stat 0x40000001
[ 51.532810] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.532811] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.548282] ata2.00: status: {DRDY ERR }
[ 51.552245] ata2.00: error: {ABRT }
[ 51.555769] ata_eh_recover: ENTER
[ 51.559122] ata_eh_revalidate_and_attach: ENTER
[ 51.563710] ata_sg_setup: 1 sg elements mapped
[ 51.568220] ata_port_flush_task: ENTER
[ 51.572020] ata_dev_set_xfermode: set features - xfer mode
[ 51.577555] ata_port_flush_task: ENTER
[ 51.581340] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.586186] ata_sg_setup: 1 sg elements mapped
[ 51.590700] ata_port_flush_task: ENTER
[ 51.594496] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.600102] ata2.00: configured for UDMA/133
[ 51.604405] ata_eh_recover: EXIT, rc=0
[ 51.608190] ata2: EH complete
[ 51.611194] ata_scsi_error: EXIT
[ 51.614461] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.621114] ata_scsi_timed_out: ENTER
[ 51.624810] ata_scsi_timed_out: EXIT, ret=0
[ 51.629033] ata_scsi_error: ENTER
[ 51.632389] ata_port_flush_task: ENTER
[ 51.636178] ata_eh_link_autopsy: ENTER
[ 51.639960] ata_eh_link_autopsy: EXIT
[ 51.643658] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.650132] ata2.00: irq_stat 0x40000001
[ 51.654090] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.654090] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.669572] ata2.00: status: {DRDY ERR }
[ 51.673531] ata2.00: error: {ABRT }
[ 51.677058] ata_eh_recover: ENTER
[ 51.680408] ata_eh_revalidate_and_attach: ENTER
[ 51.684998] ata_sg_setup: 1 sg elements mapped
[ 51.689509] ata_port_flush_task: ENTER
[ 51.693308] ata_dev_set_xfermode: set features - xfer mode
[ 51.698843] ata_port_flush_task: ENTER
[ 51.702628] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.707474] ata_sg_setup: 1 sg elements mapped
[ 51.711983] ata_port_flush_task: ENTER
[ 51.715775] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 51.721381] ata2.00: configured for UDMA/133
[ 51.725684] ata_eh_recover: EXIT, rc=0
[ 51.729469] ata2: EH complete
[ 51.732475] ata_scsi_error: EXIT
[ 51.735740] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.742394] ata_scsi_timed_out: ENTER
[ 51.746091] ata_scsi_timed_out: EXIT, ret=0
[ 51.750312] ata_scsi_error: ENTER
[ 51.753660] ata_port_flush_task: ENTER
[ 51.757450] ata_eh_link_autopsy: ENTER
[ 51.761239] ata_eh_link_autopsy: EXIT
[ 51.764937] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 51.771411] ata2.00: irq_stat 0x40000001
[ 51.775368] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 51.775369] res 51/04:00:01:01:80/00:00:00:00:00/a0 error: {ABRT }
[ 51.798329] ata_eh_recover: ENTER
[ 51.801679] ata_eh_revalidate_and_attach: ENTER
[ 51.806269] ata_s_xfermode: set features - xfer mode
[ 51.820114] ata_port_flush_task: ENTER
[ 51.823898] ata_dev_set_xfermode: EXIT, err_
[ 51.846963] ata_eh_recover: EXIT, rc=0
[ 51.850749] ata2: EH complete
[ 51.853753] ata_scsi_error: EXIT
[ 51.8570NTER
[ 51.867370] ata_scsi_timed_out: EXIT, ret=0
[ 51.871591] ata_scsi_error: ENTER
[ 51.874940] ata_port_flush_task: ENTER
[ 51.878727] ata_eh_link_autopsy: ENTER
[ 51.882509] ata_eh_link_autopsy: EXIT
[ 51.886209] ata2.00: exception 1/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 51.917364] ata2.00: status: {DRDY ERR }
[ 51.921322] ata2.0recover: ENTER
[ 51.928199] ata_eh_revalidate_and_attach: ENTER
[ 51.932789] ata_sg_setup: 1 sg elements mapped
[ 51.9 51.946633] ata_port_flush_task: ENTER
[ 51.950418] ata_dev_set_xfermode: EXIT, err_mask=0
[ 51.955266] ata_sg_setup: 1 _shift=12, xfer_mode=0x46
[ 51.969181] ata2.00: configured for UDMA/133
[ 51.973483] ata_eh_recover: EXIT, rc=0
[ 51.9 (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 51.990193] ata_scsi_timed_out: ENTER
[ 51.993889] ata_scsi_timed_out: EXIT, ret=0a_eh_link_autopsy: ENTER
[ 52.009030] ata_eh_link_autopsy: EXIT
[ 52.012728] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0k 0x1 (device error)
[ 52.038640] ata2.00: status: {DRDY ERR }
[ 52.042603] ata2.00: error: {ABRT }
[ 52.046126] ata_e sg elements mapped
[ 52.058580] ata_port_flush_task: ENTER
[ 52.062376] ata_dev_set_xfermode: set features - xfer mode
52.076544] ata_sg_setup: 1 sg elements mapped
[ 52.081054] ata_port_flush_task: ENTER
[ 52.084852] ata_dev_set_mode: xfrecover: EXIT, rc=0
[ 52.098549] ata2: EH complete
[ 52.101550] ata_scsi_error: EXIT
[ 52.104820] ata_scsi_dump_cdb: Ca_scsi_timed_out: EXIT, ret=0
[ 52.119389] ata_scsi_error: ENTER
[ 52.122737] ata_port_flush_task: ENTER
[ 52.126527] on Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.140479] ata2.00: irq_stat 0x40000001
[ 52.144440] ata2.00: cmd e5/00:00:00{ABRT }
[ 52.167405] ata_eh_recover: ENTER
[ 52.170758] ata_eh_revalidate_and_attach: ENTER
[ 52.175346] ata_sg_setup:e: set features - xfer mode
[ 52.189183] ata_port_flush_task: ENTER
[ 52.192968] ata_dev_set_xfermode: EXIT, err_mask=0
216034] ata_eh_recover: EXIT, rc=0
[ 52.219819] ata2: EH complete
[ 52.222823] ata_scsi_error: EXIT
[ 52.226090] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.232743] ata_scsi_timed_out: ENTER
[ 52.236438] ata_scsi_timedata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.261752] ata2.00: irq_stat 0x40000001
[ 52.265709] ata2.00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.281190] ata2.00: status: {DRDY ERR }
[ 52.285152] ata2.00: error[ 52.296617] ata_sg_setup: 1 sg elements mapped
[ 52.301129] ata_port_flush_task: ENTER
[ 52.304926] ata_dev_set_xfermoxfermode: EXIT, err_mask=0
[ 52.319093] ata_sg_setup: 1 sg elements mapped
[ 52.323604] ata_port_flush_task: ENTER
[ 5or: EXIT
[ 52.347360] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.354013] ata_scsi_timed_out: ENTER
[ 52.357710] ata_scsi_timed_out: EXIT, ret=0
[ 52.361930] ata_scsi_error: ENTER
[ 52.365280] ata_port_flush_task: ENTE001
[ 52.386988] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.386989] res 51/04:0[ 52.406434] ata2.00: error: {ABRT }
[ 52.409955] ata_eh_recover: ENTER
[ 52.413308] ata_eh_revalidate_and_attach: ENTE 52.426207] ata_dev_set_xfermode: set features - xfer mode
[ 52.431743] ata_port_flush_task: ENTER
[ 52.435526] ata_dev_s_port_flush_task: ENTER
[ 52.448682] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.454289] ata2.00: configured for1] ata_scsi_error: EXIT
[ 52.468649] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.475304] ata_scsi_ti_autopsy: EXIT
[ 52.497855] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.504327] ata2.00: irq_stat 0x40000001
[ 52.508284] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.508285] res 51/0h_revalidate_and_attach: ENTER
[ 52.539185] ata_sg_setup: 1 sg elements mapped
[ 52.543696] ata_port_flush_task: ENTER
[ER
[ 52.556815] ata_dev_set_xfermode: EXIT, err_mask=0
[ 52.561661] ata_sg_setup: 1 sg elements mapped
[ 52.566170] at
[ 52.586659] ata_scsi_error: EXIT
[ 52.589928] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.59658417] ata_eh_link_autopsy: EXIT
[ 52.619115] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.625590] ata2.00: irq_stat 0x40000001
[ 52.629547] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.629548] .655866] ata_eh_revalidate_and_attach: ENTER
[ 52.660455] ata_sg_setup: 1 sg elements mapped
[ 52.664964] ata_port_flush_task: ENTER
[ 52.674003] ata_dev_set_xfermode: set features - xfer mode
[ 52.679540] ata_port_flush_task: ENTER
[ 52.6
[ 52.696480] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.702086] ata2.00: configured for UDMA/133
[ 52.706391
[ 52.716448] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 52.723098] ata_scsi_timed_out: ENTER
[ 52.7t_flush_task: ENTER
[ 52.738156] ata_eh_link_autopsy: ENTER
[ 52.741945] ata_eh_link_autopsy: EXIT
[ 52.745643] ata2.0 52.756083] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.756084] res 51/04:00:01:015518] ata2.00: error: {ABRT }
[ 52.779042] ata_eh_recover: ENTER
[ 52.782395] ata_eh_revalidate_and_attach: ENTER
[ 52dev_set_xfermode: EXIT, err_mask=0
[ 52.809451] ata_sg_setup: 1 sg elements mapped
[ 52.813962] ata_port_flush_task: ENTEd for UDMA/133
[ 52.827670] ata_eh_recover: EXIT, rc=0
[ 52.831455] ata2: EH complete
[ 52.834458] ata_scsi_error: EXIsi_timed_out: ENTER
[ 52.848075] ata_scsi_timed_out: EXIT, ret=0
[ 52.852297] ata_scsi_error: ENTER
[ 52.855646] ata_p EXIT
[ 52.866925] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 52.873399] ata2.00: irq_stat 0x40000001
[ res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 52.892845] ata2.00: status: {DRDY ERR }
[ 52ate_and_attach: ENTER
[ 52.908272] ata_sg_setup: 1 sg elements mapped
[ 52.912782] ata_port_flush_task: ENTER
[ 52.916265] ata_port_flush_task: ENTER
[ 52.939057] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 52.944663] ata2.00: configured for UDMA/133
[ 52.948965] ata_eh_recover: EXIT, rc=0
[ 52.952751] ata2: EH complete
[ 52.955755] ata_scsi_error: ENTER
[ 52.976943] ata_port_flush_task: ENTER
[ 52.980730] ata_eh_link_autopsy: ENTER
[ 52.984512] ata_eh_link_autopsa2.00: irq_stat 0x40000001
[ 52.998642] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 52.99864 status: {DRDY ERR }
[ 53.018086] ata2.00: error: {ABRT }
[ 53.021610] ata_eh_recover: ENTER
[ 53.024963] ata_eh_revalflush_task: ENTER
[ 53.037852] ata_dev_set_xfermode: set features - xfer mode
[ 53.043387] ata_port_flush_task: ENTER
[ ed
[ 53.056530] ata_port_flush_task: ENTER
[ 53.060326] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.065932] a0 00 00
[ 53.086945] ata_scsi_timed_out: ENTER
[ 53.090641] ata_scsi_timed_out: EXIT, ret=0
[ 53.094864] ata_scsi_erro53.105784] ata_eh_link_autopsy: EXIT
[ 53.109482] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.115955] db 0x0 data 0
[ 53.119913] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53.135385] ata2.00: status: {DRDY ERR }
[ 53.139347] ata2.00: error: {ABRT }
[ 53.142871] ata_eh_recover: ENTER
[ 53.146223] ata_eh_revta_port_flush_task: ENTER
[ 53.168433] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.173281] ata_sg_setup: 1 sg elements mapped
[ 53.177791] ata_port_flush_task: ENTER
[ 53.181590] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.187199]5293] ata2: EH complete
[ 53.198297] ata_scsi_error: EXIT
[ 53.201565] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00psy: ENTER
[ 53.227054] ata_eh_link_autopsy: EXIT
[ 53.230752] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x00:00/a0 tag 0 cdb 0x0 data 0
[ 53.241193] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53_recover: ENTER
[ 53.267503] ata_eh_revalidate_and_attach: ENTER
[ 53.272091] ata_sg_setup: 1 sg elements mapped
[ 53.[ 53.285929] ata_port_flush_task: ENTER
[ 53.289712] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.294560] ata_sg_setup: r_shift=12, xfer_mode=0x46
[ 53.308475] ata2.00: configured for UDMA/133
[ 53.312777] ata_eh_recover: EXIT, rc=0
[ 53.IT
[ 53.326350] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 53.333004] ata_scsi_timed_out: ENTER
[ 5port_flush_task: ENTER
[ 53.348059] ata_eh_link_autopsy: ENTER
[ 53.351842] ata_eh_link_autopsy: EXIT
[ 53.355540] ata 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 53.381460] ata2.00: status: {DRDY ERR }
[ 53.385422] ata2h: ENTER
[ 53.396889] ata_sg_setup: 1 sg elements mapped
[ 53.401399] ata_port_flush_task: ENTER
[ 53.405196] ata_dev__flush_task: ENTER
[ 53.427673] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.438570] ata2.00: configured for UDMA, rc=0
[ 53.446660] ata2: EH complete
[ 53.449664] ata_scsi_error: EXIT
[ 53.452931] ata_scsi_dump_cdb: CDB (2:0,0,0) ata_eh_link_autopsy: ENTER
[ 53.478431] ata_eh_link_autopsy: EXIT
[ 53.482129] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.488601] ata2.00: irq_stat 0x40000001
[ 53.492559] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 53.515519] ata_eh_recover: ENTER
[ 53.518871] ata_eh_revalidate_and_attach: ENTER
[ 53.523460] ata_sg_setup: 1 sg elementes - xfer mode
[ 53.537314] ata_port_flush_task: ENTER
[ 53.541099] ata_dev_set_xfermode: EXIT, err_mask=0
[ 53.545945_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 53.559859] ata2.00: configured for UDMA/133
[ 53.564163] ata_eh_recover: Escsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 53.580873] ata_scsi_timed_out: ENTER
[ 53.584566] ata_scsi_time
[ 53.595927] ata_eh_link_autopsy: ENTER
[ 53.599709] ata_eh_link_autopsy: EXIT
[ 53.603409] ata2.00: exception Emask 00:00:00:00/a0 Emask 0x1 (device error)
[ 53.629311] ata2.00: status: {DRDY ERR }
[ 53.633274] ata2.00: error: {ABRT }
[ 53.636798] ata_eh_recover: ENTER
[ 53.640151] ata_eh_revalidate_and_attach: ENTER
[ 53.644739] ata_sg_setup: 1 sg eleme[ 54.165122] __ata_port_freeze: ata2 port frozen
[ 54.169686] ata_port_flush_task: ENTER
[ 54.173477] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 54.179691] ata2.00: revalidation failed (errno=-5)
[ 54.184601] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 54.189598] ata2: failed to recover some devices, retrying in 5 secs
[ 59.193927] __ata_port_freeze: ata2 port frozen
[ 61.399434] ata2: soft resetting link
[ 61.403135] ahci_do_softreset: ENTER
[ 61.406746] ahci_do_softreset: PHY reports no device
[ 61.411746] ata_std_postreset: ENTER
[ 61.415358] ata2: SATA link down (SStatus 21 SControl 300)
[ 61.420876] ata_std_postreset: EXIT
[ 61.424401] ata_eh_thaw_port: ata2 port thawed
[ 61.428879] ata_eh_revalidate_and_attach: ENTER
[ 61.433442] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 61.438442] ata2: limiting SATA link speed to 1.5 Gbps
[ 61.443613] ata2.00: limiting speed to UDMA/133:PIO3
[ 61.448610] ata2: failed to recover some devices, retrying in 5 secs
[ 62.235364] ata_port_schedule_eh: port EH scheduled
[ 62.240275] __ata_port_freeze: ata2 port frozen
[ 66.453467] __ata_port_freeze: ata2 port frozen
[ 66.458039] ata2: hard resetting link
[ 66.461734] ahci_hardreset: ENTER
[ 66.465088] sata_std_hardreset: ENTER
[ 66.468785] sata_link_hardreset: ENTER
[ 66.789964] sata_link_hardreset: EXIT, rc=0
[ 67.159769] ata_dev_classify: found ATA device by sig
[ 67.164857] sata_std_hardreset: EXIT, class=1
[ 67.169248] ata_dev_classify: found ATA device by sig
[ 67.174332] ahci_hardreset: EXIT, rc=0, class=1
[ 67.178898] ata_std_postreset: ENTER
[ 67.182510] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 67.188722] ata_std_postreset: EXIT
[ 67.192254] ata_eh_thaw_port: ata2 port thawed
[ 67.196732] ata_eh_revalidate_and_attach: ENTER
[ 67.201317] ata_sg_setup: 1 sg elements mapped
[ 67.205832] ata_port_flush_task: ENTER
[ 67.209627] ata_dev_set_xfermode: set features - xfer mode
[ 67.215163] ata_port_flush_task: ENTER
[ 67.218947] ata_dev_set_xfermode: EXIT, err_mask=0
[ 67.223795] ata_sg_setup: 1 sg elements mapped
[ 67.228307] ata_port_flush_task: ENTER
[ 67.232103] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 67.237710] ata2.00: configured for UDMA/133
[ 67.242012] ata_eh_recover: EXIT, rc=0
[ 67.245799] ata_eh_link_autopsy: ENTER
[ 67.249584] ata_eh_link_autopsy: EXIT
[ 67.253282] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0x3 t4
[ 67.260361] ata2: irq_stat 0x00000040, connection status changed
[ 67.266397] ata2: SError: {PHYRdyChg DevExch }
[ 67.270873] ata_eh_recover: ENTER
[ 67.274224] __ata_port_freeze: ata2 port frozen
[ 67.989339] ata2: soft resetting link
[ 67.993040] ahci_do_softreset: ENTER
[ 68.155912] ata_dev_classify: unknown device
[ 68.160218] ahci_do_softreset: EXIT, class=0
[ 68.164523] ata_std_postreset: ENTER
[ 68.168136] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 68.174348] ata_std_postreset: EXIT
[ 68.177871] ata_eh_thaw_port: ata2 port thawed
[ 68.182349] ata_eh_revalidate_and_attach: ENTER
[ 68.186935] ata_sg_setup: 1 sg elements mapped
[ 98.173658] ata_port_flush_task: ENTER
[ 98.177448] __ata_port_freeze: ata2 port frozen
[ 98.182009] ata2.00: qc timeout (cmd 0xec)
[ 98.186145] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[ 98.192277] ata2.00: revalidation failed (errno=-5)
[ 98.197194] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 98.202194] ata2: failed to recover some devices, retrying in 5 secs
[ 103.207688] __ata_port_freeze: ata2 port frozen
[ 103.212254] ata2: hard resetting link
[ 103.215949] ahci_hardreset: ENTER
[ 103.219303] sata_std_hardreset: ENTER
[ 103.223000] sata_link_hardreset: ENTER
[ 103.544187] sata_link_hardreset: EXIT, rc=0
[ 108.711513] ata2: port is slow to respond, please be patient (Status 0x80)
[ 113.249138] ata2: COMRESET failed (errno=-16)
[ 113.253536] ahci_hardreset: EXIT, rc=-16, class=5
[ 113.258273] ata2: hard resetting link
[ 113.261970] ahci_hardreset: ENTER
[ 113.265321] sata_std_hardreset: ENTER
[ 113.269018] sata_link_hardreset: ENTER
[ 113.592295] sata_link_hardreset: EXIT, rc=0
[ 113.962100] ata_dev_classify: found ATA device by sig
[ 113.967187] sata_std_hardreset: EXIT, class=1
[ 113.971579] ata_dev_classify: found ATA device by sig
[ 113.976662] ahci_hardreset: EXIT, rc=0, class=1
[ 113.981228] ata_std_postreset: ENTER
[ 113.984840] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 113.991052] ata_std_postreset: EXIT
[ 113.994582] ata_eh_thaw_port: ata2 port thawed
[ 113.999060] ata_eh_revalidate_and_attach: ENTER
[ 114.003648] ata_sg_setup: 1 sg elements mapped
[ 114.008160] ata_port_flush_task: ENTER
[ 114.011958] ata_dev_set_xfermode: set features - xfer mode
[ 114.017492] ata_port_flush_task: ENTER
[ 114.021278] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.026126] ata_sg_setup: 1 sg elements mapped
[ 114.030639] ata_port_flush_task: ENTER
[ 114.034434] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.040041] ata2.00: configured for UDMA/133
[ 114.044343] ata_eh_recover: EXIT, rc=0
[ 114.048129] ata_eh_link_autopsy: ENTER
[ 114.051914] ata_eh_link_autopsy: EXIT
[ 114.055611] ata_eh_recover: ENTER
[ 114.058963] ata_eh_revalidate_and_attach: ENTER
[ 114.063529] ata_eh_recover: EXIT, rc=0
[ 114.067314] ata2: EH complete
[ 114.070318] ata_scsi_error: EXIT
[ 114.073586] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.080240] ata_scsi_timed_out: ENTER
[ 114.083941] ata_scsi_timed_out: EXIT, ret=0
[ 114.088162] ata_scsi_error: ENTER
[ 114.091513] ata_port_flush_task: ENTER
[ 114.095302] ata_eh_link_autopsy: ENTER
[ 114.099085] ata_eh_link_autopsy: EXIT
[ 114.102783] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.109255] ata2.00: irq_stat 0x40000001
[ 114.113213] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.113214] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.128686] ata2.00: status: {DRDY ERR }
[ 114.132648] ata2.00: error: {ABRT }
[ 114.136172] ata_eh_recover: ENTER
[ 114.139525] ata_eh_revalidate_and_attach: ENTER
[ 114.144114] ata_sg_setup: 1 sg elements mapped
[ 114.148627] ata_port_flush_task: ENTER
[ 114.157668] ata_dev_set_xfermode: set features - xfer mode
[ 114.163207] ata_port_flush_task: ENTER
[ 114.166991] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.171839] ata_sg_setup: 1 sg elements mapped
[ 114.176353] ata_port_flush_task: ENTER
[ 114.180148] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.185754] ata2.00: configured for UDMA/133
[ 114.190057] ata_eh_recover: EXIT, rc=0
[ 114.193842] ata2: EH complete
[ 114.196846] ata_scsi_error: EXIT
[ 114.200114] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.206768] ata_scsi_timed_out: ENTER
[ 114.210469] ata_scsi_timed_out: EXIT, ret=0
[ 114.214690] ata_scsi_error: ENTER
[ 114.218041] ata_port_flush_task: ENTER
[ 114.221830] ata_eh_link_autopsy: ENTER
[ 114.225613] ata_eh_link_autopsy: EXIT
[ 114.229311] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.235783] ata2.00: irq_stat 0x40000001
[ 114.239741] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.239742] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.255213] ata2.00: status: {DRDY ERR }
[ 114.259176] ata2.00: error: {ABRT }
[ 114.262700] ata_eh_recover: ENTER
[ 114.266052] ata_eh_revalidate_and_attach: ENTER
[ 114.270641] ata_sg_setup: 1 sg elements mapped
[ 114.275154] ata_port_flush_task: ENTER
[ 114.278951] ata_dev_set_xfermode: set features - xfer mode
[ 114.284487] ata_port_flush_task: ENTER
[ 114.288271] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.293119] ata_sg_setup: 1 sg elements mapped
[ 114.297631] ata_port_flush_task: ENTER
[ 114.301427] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.307033] ata2.00: configured for UDMA/133
[ 114.311336] ata_eh_recover: EXIT, rc=0
[ 114.315121] ata2: EH complete
[ 114.318125] ata_scsi_error: EXIT
[ 114.321392] ata_scsi_dump_cdb: CDB (2:0,0,0) 1b 01 00 00 01 00 00 00 00
[ 114.328046] ata_scsi_timed_out: ENTER
[ 114.331740] ata_scsi_timed_out: EXIT, ret=0
[ 114.335966] ata_scsi_error: ENTER
[ 114.339322] ata_port_flush_task: ENTER
[ 114.343109] ata_eh_link_autopsy: ENTER
[ 114.346891] ata_eh_link_autopsy: EXIT
[ 114.350589] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 114.357064] ata2.00: irq_stat 0x40000001
[ 114.361028] ata2.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 0
[ 114.361029] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 114.376501] ata2.00: status: {DRDY ERR }
[ 114.380464] ata2.00: error: {ABRT }
[ 114.383988] ata_eh_recover: ENTER
[ 114.387340] ata_eh_revalidate_and_attach: ENTER
[ 114.391931] ata_sg_setup: 1 sg elements mapped
[ 114.396443] ata_port_flush_task: ENTER
[ 114.400238] ata_dev_set_xfermode: set features - xfer mode
[ 114.405775] ata_port_flush_task: ENTER
[ 114.409560] ata_dev_set_xfermode: EXIT, err_mask=0
[ 114.414405] ata_sg_setup: 1 sg elements mapped
[ 114.418920] ata_port_flush_task: ENTER
[ 114.422714] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 114.428320] ata2.00: configured for UDMA/133
[ 114.432623] ata_eh_recover: EXIT, rc=0
[ 114.436412] ata2: EH complete
[ 114.439413] ata_scsi_error: EXIT
[ 115.437997] .<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.445060] ata_scsi_timed_out: ENTER
[ 115.448757] ata_scsi_timed_out: EXIT, ret=0
[ 115.452976] ata_scsi_error: ENTER
[ 115.456327] ata_port_flush_task: ENTER
[ 115.460115] ata_eh_link_autopsy: ENTER
[ 115.463897] ata_eh_link_autopsy: EXIT
[ 115.467595] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.474067] ata2.00: irq_stat 0x40000001
[ 115.478025] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.478026] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.493499] ata2.00: status: {DRDY ERR }
[ 115.497459] ata2.00: error: {ABRT }
[ 115.500986] ata_eh_recover: ENTER
[ 115.504336] ata_eh_revalidate_and_attach: ENTER
[ 115.508926] ata_sg_setup: 1 sg elements mapped
[ 115.513438] ata_port_flush_task: ENTER
[ 115.517237] ata_dev_set_xfermode: set features - xfer mode
[ 115.522772] ata_port_flush_task: ENTER
[ 115.526554] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.531402] ata_sg_setup: 1 sg elements mapped
[ 115.535915] ata_port_flush_task: ENTER
[ 115.539711] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.545317] ata2.00: configured for UDMA/133
[ 115.549620] ata_eh_recover: EXIT, rc=0
[ 115.553406] ata2: EH complete
[ 115.556409] ata_scsi_error: EXIT
[ 115.559677] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.566340] ata_scsi_timed_out: ENTER
[ 115.570032] ata_scsi_timed_out: EXIT, ret=0
[ 115.574254] ata_scsi_error: ENTER
[ 115.577604] ata_port_flush_task: ENTER
[ 115.581394] ata_eh_link_autopsy: ENTER
[ 115.585186] ata_eh_link_autopsy: EXIT
[ 115.588884] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.595357] ata2.00: irq_stat 0x40000001
[ 115.599322] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.599323] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.614795] ata2.00: status: {DRDY ERR }
[ 115.618757] ata2.00: error: {ABRT }
[ 115.622281] ata_eh_recover: ENTER
[ 115.625634] ata_eh_revalidate_and_attach: ENTER
[ 115.630222] ata_sg_setup: 1 sg elements mapped
[ 115.634735] ata_port_flush_task: ENTER
[ 115.638532] ata_dev_set_xfermode: set features - xfer mode
[ 115.644067] ata_port_flush_task: ENTER
[ 115.647853] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.652699] ata_sg_setup: 1 sg elements mapped
[ 115.657211] ata_port_flush_task: ENTER
[ 115.661007] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.666614] ata2.00: configured for UDMA/133
[ 115.670917] ata_eh_recover: EXIT, rc=0
[ 115.674703] ata2: EH complete
[ 115.677704] ata_scsi_error: EXIT
[ 115.680975] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.687627] ata_scsi_timed_out: ENTER
[ 115.691320] ata_scsi_timed_out: EXIT, ret=0
[ 115.695542] ata_scsi_error: ENTER
[ 115.698892] ata_port_flush_task: ENTER
[ 115.702682] ata_eh_link_autopsy: ENTER
[ 115.706472] ata_eh_link_autopsy: EXIT
[ 115.710172] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.716644] ata2.00: irq_stat 0x40000001
[ 115.720601] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.720602] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.736074] ata2.00: status: {DRDY ERR }
[ 115.740037] ata2.00: error: {ABRT }
[ 115.743562] ata_eh_recover: ENTER
[ 115.746912] ata_eh_revalidate_and_attach: ENTER
[ 115.751501] ata_sg_setup: 1 sg elements mapped
[ 115.756013] ata_port_flush_task: ENTER
[ 115.759810] ata_dev_set_xfermode: set features - xfer mode
[ 115.765347] ata_port_flush_task: ENTER
[ 115.769132] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.773977] ata_sg_setup: 1 sg elements mapped
[ 115.778490] ata_port_flush_task: ENTER
[ 115.782286] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.787892] ata2.00: configured for UDMA/133
[ 115.792195] ata_eh_recover: EXIT, rc=0
[ 115.795982] ata2: EH complete
[ 115.798986] ata_scsi_error: EXIT
[ 115.802253] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.808916] ata_scsi_timed_out: ENTER
[ 115.812609] ata_scsi_timed_out: EXIT, ret=0
[ 115.816830] ata_scsi_error: ENTER
[ 115.820180] ata_port_flush_task: ENTER
[ 115.823970] ata_eh_link_autopsy: ENTER
[ 115.827759] ata_eh_link_autopsy: EXIT
[ 115.831460] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.837932] ata2.00: irq_stat 0x40000001
[ 115.841889] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.841890] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.857362] ata2.00: status: {DRDY ERR }
[ 115.861325] ata2.00: error: {ABRT }
[ 115.864849] ata_eh_recover: ENTER
[ 115.868201] ata_eh_revalidate_and_attach: ENTER
[ 115.872789] ata_sg_setup: 1 sg elements mapped
[ 115.877302] ata_port_flush_task: ENTER
[ 115.881099] ata_dev_set_xfermode: set features - xfer mode
[ 115.886633] ata_port_flush_task: ENTER
[ 115.890419] ata_dev_set_xfermode: EXIT, err_mask=0
[ 115.895265] ata_sg_setup: 1 sg elements mapped
[ 115.899782] ata_port_flush_task: ENTER
[ 115.903575] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 115.914433] ata2.00: configured for UDMA/133
[ 115.918741] ata_eh_recover: EXIT, rc=0
[ 115.922528] ata2: EH complete
[ 115.925532] ata_scsi_error: EXIT
[ 115.928799] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 115.935454] ata_scsi_timed_out: ENTER
[ 115.939154] ata_scsi_timed_out: EXIT, ret=0
[ 115.943375] ata_scsi_error: ENTER
[ 115.946726] ata_port_flush_task: ENTER
[ 115.950516] ata_eh_link_autopsy: ENTER
[ 115.954305] ata_eh_link_autopsy: EXIT
[ 115.958005] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 115.964478] ata2.00: irq_stat 0x40000001
[ 115.968437] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 115.968437] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 115.983925] ata2.00: status: {DRDY ERR }
[ 115.987887] ata2.00: error: {ABRT }
[ 115.991411] ata_eh_recover: ENTER
[ 115.994764] ata_eh_revalidate_and_attach: ENTER
[ 115.999352] ata_sg_setup: 1 sg elements mapped
[ 116.003864] ata_port_flush_task: ENTER
[ 116.007662] ata_dev_set_xfermode: set features - xfer mode
[ 116.013196] ata_port_flush_task: ENTER
[ 116.016982] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.021828] ata_sg_setup: 1 sg elements mapped
[ 116.026343] ata_port_flush_task: ENTER
[ 116.030136] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.035745] ata2.00: configured for UDMA/133
[ 116.040047] ata_eh_recover: EXIT, rc=0
[ 116.043833] ata2: EH complete
[ 116.046838] ata_scsi_error: EXIT
[ 116.050103] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.056765] ata_scsi_timed_out: ENTER
[ 116.060460] ata_scsi_timed_out: EXIT, ret=0
[ 116.064681] ata_scsi_error: ENTER
[ 116.068032] ata_port_flush_task: ENTER
[ 116.071823] ata_eh_link_autopsy: ENTER
[ 116.075612] ata_eh_link_autopsy: EXIT
[ 116.079310] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.085782] ata2.00: irq_stat 0x40000001
[ 116.089740] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.089741] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.105213] ata2.00: status: {DRDY ERR }
[ 116.109175] ata2.00: error: {ABRT }
[ 116.112699] ata_eh_recover: ENTER
[ 116.116052] ata_eh_revalidate_and_attach: ENTER
[ 116.120641] ata_sg_setup: 1 sg elements mapped
[ 116.125155] ata_port_flush_task: ENTER
[ 116.128950] ata_dev_set_xfermode: set features - xfer mode
[ 116.134485] ata_port_flush_task: ENTER
[ 116.138269] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.143117] ata_sg_setup: 1 sg elements mapped
[ 116.147631] ata_port_flush_task: ENTER
[ 116.151425] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.157032] ata2.00: configured for UDMA/133
[ 116.161334] ata_eh_recover: EXIT, rc=0
[ 116.165123] ata2: EH complete
[ 116.168123] ata_scsi_error: EXIT
[ 116.171391] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.178053] ata_scsi_timed_out: ENTER
[ 116.181748] ata_scsi_timed_out: EXIT, ret=0
[ 116.185969] ata_scsi_error: ENTER
[ 116.189319] ata_port_flush_task: ENTER
[ 116.193109] ata40000001
[ 116.211029] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.211029] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.226510] ata2.00: status: {DRDY ERR }
[ 116.230473] ata2.00
[ 116.250246] ata_dev_set_xfermode: set features - xfer mode
[ 116.255782] ata_port_flush_task: ENTER
[ 116.259566] ata_] ata_port_flush_task: ENTER
[ 116.272721] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.278328] ata2.00: configure299351] ata_scsi_timed_out: ENTER
[ 116.303044] ata_scsi_timed_out: EXIT, ret=0
[ 116.307265] ata_scsi_error: ENTER
[ 116.310616] ata_port_flush_task: ENTER
[ 116.314406] ata_eh_link_autopsy: ENTER
[ 116.318195] ata_eh_link_autopsy: EXIT
[ 11 116.332326] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.347798] ata2.00: status: {DRDY ta_eh_revalidate_and_attach: ENTER
[ 116.363226] ata_sg_setup: 1 sg elements mapped
[ 116.367739] ata_port_flush_task: ENTE: ENTER
[ 116.380854] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.385702] ata_sg_setup: 1 sg elements mapped
[ 116.3902116.399617] ata2.00: configured for UDMA/133
[ 116.403920] ata_eh_recover: EXIT, rc=0
[ 116.407705] ata2: EH complete
[ 1100 00
[ 116.420639] ata_scsi_timed_out: ENTER
[ 116.424331] ata_scsi_timed_out: EXIT, ret=0
[ 116.428553] ata_scsi_error:116.449647] ata2.00: irq_stat 0x40000001
[ 116.453612] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 085] ata2.00: status: {DRDY ERR }
[ 116.473047] ata2.00: error: {ABRT }
[ 116.476571] ata_eh_recover: ENTER
[ 116.479923]024] ata_port_flush_task: ENTER
[ 116.492821] ata_dev_set_xfermode: set features - xfer mode
[ 116.498359] ata_port_flush_telements mapped
[ 116.511503] ata_port_flush_task: ENTER
[ 116.515299] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 00 00 00 00 00 00 00
[ 116.541927] ata_scsi_timed_out: ENTER
[ 116.545620] ata_scsi_timed_out: EXIT, ret=0
[ 116.549841] ata_scsi_error: ENTER
[ 116.553193] ata_port_flush_task: ENTER
[ 116.556981] ata_eh_link_autopsy: ENTER
[ 116.560763] at:00/a0 tag 0 cdb 0x0 data 0
[ 116.574901] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.590373] ata2.00: status: {DRDY ERR }
[ 116.594335] ata2.00: error: {ABRT }
[ 116.597861] ata_eh_recover: ENTER
[ 116.6012 116.619647] ata_port_flush_task: ENTER
[ 116.623430] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.628278] ata_sg_setup: 1 _shift=12, xfer_mode=0x46
[ 116.642193] ata2.00: configured for UDMA/133
[ 116.646495] ata_eh_recover: EXIT, rc=0
[ 116.6[ 116.672151] ata_scsi_timed_out: EXIT, ret=0
[ 116.676370] ata_scsi_error: ENTER
[ 116.679720] ata_port_flush_task: ENTERutopsy: EXIT
[ 116.690998] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.697472] ata2.00: irq_stat 0x40000001
[ 116.701429] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 116.701430] res 51/04:DRDY ERR }
[ 116.720872] ata2.00: error: {ABRT }
[ 116.724396] ata_eh_recover: ENTER
[ 116.727748] ata_eh_revalidate_and_
[ 116.750011] ata_dev_set_xfermode: EXIT, err_mask=0
[ 116.754859] ata_sg_setup: 1 sg elements mapped
[ 116.759372] ata_72] ata2.00: configured for UDMA/133
[ 116.773077] ata_eh_recover: EXIT, rc=0
[ 116.776862] ata2: EH complete
[ 116.77986[ 116.789787] ata_scsi_timed_out: ENTER
[ 116.793488] ata_scsi_timed_out: EXIT, ret=0
[ 116.797709] ata_scsi_error: ENTER] ata_eh_link_autopsy: EXIT
[ 116.812330] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.818802] ata2.00: ta2.00: status: {DRDY ERR }
[ 116.842195] ata2.00: error: {ABRT }
[ 116.845719] ata_eh_recover: ENTER
[ 116.849072] ata_e_port_flush_task: ENTER
[ 116.861970] ata_dev_set_xfermode: set features - xfer mode
[ 116.867505] ata_port_flush_task: ENTs mapped
[ 116.880650] ata_port_flush_task: ENTER
[ 116.884446] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 116.8902: EH complete
[ 116.901144] ata_scsi_error: EXIT
[ 116.904412] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 116.929920] ata_eh_link_autopsy: EXIT
[ 116.933618] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 116.94ag 0 cdb 0x0 data 0
[ 116.944048] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 116.959520] ENTER
[ 116.970359] ata_eh_revalidate_and_attach: ENTER
[ 116.974948] ata_sg_setup: 1 sg elements mapped
[ 116.979460] atup: 1 sg elements mapped
[ 117.001937] ata_port_flush_task: ENTER
[ 117.005733] ata_dev_set_mode: xfer_shift=12, xfer_mode= 117.019429] ata2: EH complete
[ 117.022432] ata_scsi_error: EXIT
[ 117.025699] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 0ret=0
[ 117.040278] ata_scsi_error: ENTER
[ 117.043628] ata_port_flush_task: ENTER
[ 117.047416] ata_eh_link_autopsy: ENT00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.065329] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 117.080801] ata2.00: status: {DRDY ERR }
[ 117.084763] ata2.00: error: {ABRT }
[ 117.088287] ata_eh_recover: ENTER
[ nts mapped
[ 117.100741] ata_port_flush_task: ENTER
[ 117.104538] ata_dev_set_xfermode: set features - xfer mode
[ 117.11de: xfer_shift=12, xfer_mode=0x46
[ 117.132619] ata2.00: configured for UDMA/133
[ 117.136921] ata_eh_recover: EXIT, rc=0
db: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.153632] ata_scsi_timed_out: ENTER
[ 117.157327] ata_scsi_timed_out: EXIT686] ata_eh_link_autopsy: ENTER
[ 117.172469] ata_eh_link_autopsy: EXIT
[ 117.176169] ata2.00: exception Emask 0x0 SAct 0x000:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.186599] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 [ 117.209557] ata_eh_recover: ENTER
[ 117.212910] ata_eh_revalidate_and_attach: ENTER
[ 117.217498] ata_sg_setup: 1 sg eleatures - xfer mode
[ 117.231343] ata_port_flush_task: ENTER
[ 117.235129] ata_dev_set_xfermode: EXIT, err_mask=0
[ 117.23 ata_eh_recover: EXIT, rc=0
[ 117.261979] ata2: EH complete
[ 117.264982] ata_scsi_error: EXIT
[ 117.268250] ata_scsi_dum605] ata_scsi_timed_out: EXIT, ret=0
[ 117.282827] ata_scsi_error: ENTER
[ 117.286177] ata_port_flush_task: ENTER
[ 117.2 exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 117.303920] ata2.00: irq_stat 0x40000001
[ 117.307877] ata2.00: cmd e5/error: {ABRT }
[ 117.330839] ata_eh_recover: ENTER
[ 117.334190] ata_eh_revalidate_and_attach: ENTER
[ 117.338778] ata_sgxfermode: set features - xfer mode
[ 117.352623] ata_port_flush_task: ENTER
[ 117.356407] ata_dev_set_xfermode: EXIT, err_m
[ 117.369563] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 117.375170] ata2.00: configured for UDMA/133
[ 117.379473
[ 117.389529] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.396192] ata_scsi_timed_out: ENTER
[ 117.3t_flush_task: ENTER
[ 117.411246] ata_eh_link_autopsy: ENTER
[ 117.415028] ata_eh_link_autopsy: EXIT
[ 117.418726] ata2.0[ 117.430451] ata2.00: irq_stat 0x40000001
[ 117.434415] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 datarecover: ENTER
[ 117.460734] ata_eh_revalidate_and_attach: ENTER
[ 117.465322] ata_sg_setup: 1 sg elements mapped
[ 117.469836] ata_port_flush_task: ENTER
[ 117.473633] ata_dev_set_xfermode: set features - xfer mode
[ 117.479168] ata_port_flush_shift=12, xfer_mode=0x46
[ 117.501715] ata2.00: configured for UDMA/133
[ 117.506017] ata_eh_recover: EXIT, rc=0
[ 117.5(2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 117.522728] ata_scsi_timed_out: ENTER
[ 117.526422] ata_scsi_timed_out: EXIT, ret=0
[ 117.530644] ata_scsi_error: ENTER
[ 117.533995] ata_port_flush_task: ENTER
[ 117.537782] ata_eh_link_autopsy: ENTER
[ 0:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 117.555702] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device578662] ata_eh_recover: ENTER
[ 117.582012] ata_eh_revalidate_and_attach: ENTER
[ 117.586603] ata_sg_setup: 1 sg elements m xfer mode
[ 117.600448] ata_port_flush_task: ENTER
[ 117.604233] ata_dev_set_xfermode: EXIT, err_mask=0
[ 117.609078] at_set_mode: xfer_shift=12, xfer_mode=0x46
[ 117.622993] ata2.00: configured for UDMA/133
[ 117.627298] ata_eh_recover: EXIT,[ 118.633003] .<3>ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.640061] ata_scsi_timed_out: ENTER
[ 118.643757] ata_scsi_timed_out: EXIT, ret=0
[ 118.647979] ata_scsi_error: ENTER
[ 118.651327] ata_port_flush_task: ENTER
[ 118.655117] ata_eh_link_autopsy: ENTER
[ 118.658899] ata_eh_link_autopsy: EXIT
[ 118.662597] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.669070] ata2.00: irq_stat 0x40000001
[ 118.673027] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.673028] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.688500] ata2.00: status: {DRDY ERR }
[ 118.692462] ata2.00: error: {ABRT }
[ 118.695986] ata_eh_recover: ENTER
[ 118.699339] ata_eh_revalidate_and_attach: ENTER
[ 118.703927] ata_sg_setup: 1 sg elements mapped
[ 118.708441] ata_port_flush_task: ENTER
[ 118.712236] ata_dev_set_xfermode: set features - xfer mode
[ 118.717773] ata_port_flush_task: ENTER
[ 118.721557] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.726405] ata_sg_setup: 1 sg elements mapped
[ 118.730917] ata_port_flush_task: ENTER
[ 118.734713] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.740320] ata2.00: configured for UDMA/133
[ 118.744622] ata_eh_recover: EXIT, rc=0
[ 118.748408] ata2: EH complete
[ 118.751411] ata_scsi_error: EXIT
[ 118.754679] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.761342] ata_scsi_timed_out: ENTER
[ 118.765034] ata_scsi_timed_out: EXIT, ret=0
[ 118.769258] ata_scsi_error: ENTER
[ 118.772608] ata_port_flush_task: ENTER
[ 118.776396] ata_eh_link_autopsy: ENTER
[ 118.780178] ata_eh_link_autopsy: EXIT
[ 118.783876] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.790351] ata2.00: irq_stat 0x40000001
[ 118.794315] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.794316] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.809788] ata2.00: status: {DRDY ERR }
[ 118.813750] ata2.00: error: {ABRT }
[ 118.817274] ata_eh_recover: ENTER
[ 118.820626] ata_eh_revalidate_and_attach: ENTER
[ 118.825215] ata_sg_setup: 1 sg elements mapped
[ 118.829728] ata_port_flush_task: ENTER
[ 118.833525] ata_dev_set_xfermode: set features - xfer mode
[ 118.839060] ata_port_flush_task: ENTER
[ 118.842846] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.847692] ata_sg_setup: 1 sg elements mapped
[ 118.852205] ata_port_flush_task: ENTER
[ 118.856001] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.861607] ata2.00: configured for UDMA/133
[ 118.865910] ata_eh_recover: EXIT, rc=0
[ 118.869695] ata2: EH complete
[ 118.872699] ata_scsi_error: EXIT
[ 118.875967] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 118.882630] ata_scsi_timed_out: ENTER
[ 118.886322] ata_scsi_timed_out: EXIT, ret=0
[ 118.890546] ata_scsi_error: ENTER
[ 118.893896] ata_port_flush_task: ENTER
[ 118.897684] ata_eh_link_autopsy: ENTER
[ 118.901466] ata_eh_link_autopsy: EXIT
[ 118.905164] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 118.911637] ata2.00: irq_stat 0x40000001
[ 118.915594] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 118.915595] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 118.931069] ata2.00: status: {DRDY ERR }
[ 118.935029] ata2.00: error: {ABRT }
[ 118.938555] ata_eh_recover: ENTER
[ 118.941905] ata_eh_revalidate_and_attach: ENTER
[ 118.946495] ata_sg_setup: 1 sg elements mapped
[ 118.951009] ata_port_flush_task: ENTER
[ 118.954803] ata_dev_set_xfermode: set features - xfer mode
[ 118.960341] ata_port_flush_task: ENTER
[ 118.964125] ata_dev_set_xfermode: EXIT, err_mask=0
[ 118.968972] ata_sg_setup: 1 sg elements mapped
[ 118.973485] ata_port_flush_task: ENTER
[ 118.977281] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 118.982887] ata2.00: configured for UDMA/133
[ 118.987190] ata_eh_recover: EXIT, rc=0
[ 118.990975] ata2: EH complete
[ 118.993979] ata_scsi_error: EXIT
[ 118.997246] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.003901] ata_scsi_timed_out: ENTER
[ 119.007602] ata_scsi_timed_out: EXIT, ret=0
[ 119.011825] ata_scsi_error: ENTER
[ 119.015176] ata_port_flush_task: ENTER
[ 119.018963] ata_eh_link_autopsy: ENTER
[ 119.022745] ata_eh_link_autopsy: EXIT
[ 119.026445] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.032917] ata2.00: irq_stat 0x40000001
[ 119.036875] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.036876] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.052357] ata2.00: status: {DRDY ERR }
[ 119.056317] ata2.00: error: {ABRT }
[ 119.059843] ata_eh_recover: ENTER
[ 119.063193] ata_eh_revalidate_and_attach: ENTER
[ 119.067784] ata_sg_setup: 1 sg elements mapped
[ 119.072298] ata_port_flush_task: ENTER
[ 119.076095] ata_dev_set_xfermode: set features - xfer mode
[ 119.081629] ata_port_flush_task: ENTER
[ 119.085414] ata_dev_set_xfermode: EXIT, err_mask=0
[ 119.090259] ata_sg_setup: 1 sg elements mapped
[ 119.094773] ata_port_flush_task: ENTER
[ 119.098567] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 119.104174] ata2.00: configured for UDMA/133
[ 119.108479] ata_eh_recover: EXIT, rc=0
[ 119.112264] ata2: EH complete
[ 119.115267] ata_scsi_error: EXIT
[ 119.118535] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.125189] ata_scsi_timed_out: ENTER
[ 119.128892] ata_scsi_timed_out: EXIT, ret=0
[ 119.133113] ata_scsi_error: ENTER
[ 119.136464] ata_port_flush_task: ENTER
[ 119.140251] ata_eh_link_autopsy: ENTER
[ 119.144033] ata_eh_link_autopsy: EXIT
[ 119.147731] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.154206] ata2.00: irq_stat 0x40000001
[ 119.158170] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.158171] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.173643] ata2.00: status: {DRDY ERR }
[ 119.182856] ata2.00: error: {ABRT }
[ 119.186380] ata_eh_recover: ENTER
[ 119.189730] ata_eh_revalidate_and_attach: ENTER
[ 119.194321] ata_sg_setup: 1 sg elements mapped
[ 119.198833] ata_port_flush_task: ENTER
[ 119.202630] ata_dev_set_xfermode: set features - xfer mode
[ 119.208165] ata_port_flush_task: ENTER
[ 119.211950] ata_dev_set_xfermode: EXIT, err_mask=0
[ 119.216797] ata_sg_setup: 1 sg elements mapped
[ 119.221310] ata_port_flush_task: ENTER
[ 119.225106] ata_dev_set_mode: xfer_shift=12, xfer_mode=0x46
[ 119.230710] ata2.00: configured for UDMA/133
[ 119.235015] ata_eh_recover: EXIT, rc=0
[ 119.238801] ata2: EH complete
[ 119.241805] ata_scsi_error: EXIT
[ 119.245072] ata_scsi_dump_cdb: CDB (2:0,0,0) 00 00 00 00 00 00 00 00 00
[ 119.251726] ata_scsi_timed_out: ENTER
[ 119.255427] ata_scsi_timed_out: EXIT, ret=0
[ 119.259648] ata_scsi_error: ENTER
[ 119.262999] ata_port_flush_task: ENTER
[ 119.266788] ata_eh_link_autopsy: ENTER
[ 119.270571] ata_eh_link_autopsy: EXIT
[ 119.274269] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 119.280741] ata2.00: irq_stat 0x40000001
[ 119.284699] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
[ 119.284700] res 51/04:00:01:01:80/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 119.300174] ata2.00: status: {DRDY ERR }
[ 119.304134] ata2.00: error: {ABRT }
[ 119.307658] ata_eh_recover: ENTER
[ 119.311010] ata_eh_revalidate_and_attach: ENTER
[ 119.315598] ata_sg_setup: 1 sg elements mapped
[ 119.835981] __ata_port_freeze: ata2 port frozen
[ 119.840544] ata_port_flush_task: ENTER
[ 119.844336] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 119.850553] ata2.00: revalidation failed (errno=-5)
[ 119.855470] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 119.860467] ata2: failed to recover some devices, retrying in 5 secs
[ 124.866425] __ata_port_freeze: ata2 port frozen
[ 127.071953] ata2: soft resetting link
[ 127.075650] ahci_do_softreset: ENTER
[ 127.079263] ahci_do_softreset: PHY reports no device
[ 127.084260] ata_std_postreset: ENTER
[ 127.087872] ata2: SATA link down (SStatus 11 SControl 310)
[ 127.093390] ata_std_postreset: EXIT
[ 127.096915] ata_eh_thaw_port: ata2 port thawed
[ 127.101393] ata_eh_revalidate_and_attach: ENTER
[ 127.105959] ata_eh_revalidate_and_attach: EXIT rc=-5
[ 127.110957] ata2.00: limiting speed to UDMA/133:PIO2
[ 127.115953] ata2: failed to recover some devices, retrying in 5 secs
next prev parent reply other threads:[~2007-09-26 2:26 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-24 18:02 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot Berck E. Nash
2007-09-25 1:37 ` Jeff Garzik
2007-09-25 18:14 ` Berck E. Nash
2007-09-25 18:21 ` Jens Axboe
2007-09-25 18:28 ` Berck E. Nash
2007-09-25 18:32 ` Jens Axboe
2007-09-25 19:29 ` Berck E. Nash
2007-09-25 20:40 ` Jeff Garzik
2007-09-25 22:07 ` Berck E. Nash
2007-09-25 22:46 ` Berck E. Nash
2007-09-26 1:21 ` Jeff Garzik
2007-09-26 2:25 ` Berck E. Nash [this message]
2007-09-26 2:33 ` Jeff Garzik
2007-09-26 4:40 ` Jeff Garzik
2007-09-26 10:03 ` Bernd Schmidt
2007-09-26 14:22 ` Berck E. Nash
2007-09-27 1:05 ` Tejun Heo
2007-09-26 14:19 ` Berck E. Nash
2007-10-03 21:18 ` Jeff Garzik
[not found] <fa.7B5oGGPZtkIAG9trDHdybt+z9Qg@ifi.uio.no>
[not found] ` <fa.lh2GEsFivC+TeMBqgRXU+5p7ySM@ifi.uio.no>
[not found] ` <fa.tqIC/0YXN2BDEJQ7WBFuJ0EEUrI@ifi.uio.no>
[not found] ` <fa.Q/HeymU0u7VpG+dN5Lc1DraTos0@ifi.uio.no>
2007-09-25 22:39 ` Robert Hancock
2007-09-26 1:10 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F9C336.3010005@gmail.com \
--to=flyboy@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.