From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nikolay Kichukov Date: Wed, 26 Sep 2007 11:37:15 +0000 Subject: Re: [LARTC] how to make setting using tc command as permanent. Message-Id: <46FA446B.6030108@oldum.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, You need to call your script on startup. However there are different methods of doing this. On a slackware linux you can user /etc/init.d/rc.local On a debian linux that script also exists so you can use it as well. Just make sure it is sym-linked to /etc/rc2.d/ HTH, -Nikolay Raghuvendra Kumar wrote: > Hi, > > I am facing a problem.Suppose i made some QOS configuration using tc. > But if system reboots, it disappears. > > How to make tc setting permanent. > > Regards, > > Raghuvendra Kumar | BTSL > 414 | Ext > 011-41619770 | Desk > +91-9818143739 | Mobile > raghuvendra.kumar@bhartitelesoft.com | EMail > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc