From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mats Petersson Subject: RE: Buffered IO for IO? Date: Mon, 23 Jul 2007 20:00:31 +0100 Message-ID: <46a4faf3.2134440a.482b.6698@mx.google.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Return-path: In-Reply-To: References: List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: "Zulauf, John" , Keir Fraser , Trolle Selander Cc: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org At 19:49 23/07/2007, Zulauf, John wrote: >Content-class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C7CD5A.31A74761" > >Thanks for the comments. Frankly, I'm guessing the bulk of the time >in the COM port IO is VMEXIT time, and that saving qemu round-trip >would be a marginal effect**. I guess the question of how much of the time is spent where depends on the setup. One thing you may want to try, is to ensure that the guest domain(s) and Dom0 doesn't share the same CPU(core) - by giving Dom0 it's own CPU(core) to run on you eliminate the possibility that some other guest is still using Dom0's CPU when you want QEMU to run. If you have MANY HVM domains, you may also want to give more than a single core to Dom0. > >As for the read's flushing writes, this happens automatically as a >result of how the buffered_io page works (and assuming one sticks to >this design for IO buffering). If dir == IOREQ_READ then attempt to >buffered the IO request will fail. Thus, hvm_send_assist_req is >invoked. When qemu catches the "notify" event of the READ it firsts >dispatches *all* of the buffered io requests before dispatching the >READ. Thus order is preserved and inb are synchronous from the vcpu >point of view. Yes, that's the trivial case. But what about a write to 0x3F8 (send data) and code that goes to sleep, waiting for an IRQ to say that the data has been sent? There may not be a read of any port in the serial port in between - thanks to Trolle for reminding me of this type of operation. -- Mats > >As for controlling outbound FIFO depth, adding a per range >"max_depth" test to the "queue is full" test already in use for mmio >buffering would be straight forward. > >The interrupt issues are more concerning. A one byte write "window" >at 3F8 doesn't seem to have this issue (c.f.) >ftp://ftp.phil.uni-sb.de/pub/staff/chris/The_Serial_Port > >But I agree that proxy device models are not desirable when not >performance critical. Regardless, they wouldn't be supported >directly though a simple "hvm_buffered_io_intercept" call. This >would be more suited to the approach used in hvm_mmio_intercept to >do the lapic emulation. > > >John > >** For those interested, I'm looking at the performance of using >Windbg for Guest domain debug, and the time to do the serial port >based initialization of a kernel debug session. Starting a WinDBG >session on a Windows guest OS takes several minutes. Any suggestions >to optimize that process would be gladly entertained. > > >---------- >From: Keir Fraser [mailto:keir@xensource.com] >Sent: Saturday, July 21, 2007 4:09 AM >To: Trolle Selander; Zulauf, John >Cc: xen-devel@lists.xensource.com >Subject: Re: [Xen-devel] Buffered IO for IO? > >Yes, it strikes me that this cannot be done safely without providing >a set of 'proxy device models' in the hypervisor that know when it >is safe to buffer and when the buffers must be flushed, according to >native hardware behaviour. > > -- Keir > >On 21/7/07 11:59, "Trolle Selander" wrote: >Safety would depend on how the emulated device works. For serial >ports in particular, it's definitely not safe, since depending on >the model of UART emulated, and the settings of the UART control >registers, every outb may result in a serial interrupt and UART >register changes that will have to be processed before any further >io can be done. >It's possible that there might be some performance to be gained by >"upgrading" the emulated UART to a 16550A or better, and doing >buffered IO for the FIFO. Earlier this year I was experimenting with >a patch that made the qemu-dm serial emulation into a 16550A with >FIFO, but though the patch did fix some compatability issues with >software that assumed a 16550A UART in the HVM guest I'm working >with, serial performance actually got noticeably _worse_, so I never >bothered submitting it. Implementing the FIFO with buffered IO would >possibly make it work better, but I don't see how it could be done >without moving at least part of the serial device model into the >hypervisor, which just strikes me as more trouble than it's worth. > >/Trolle > >On 7/21/07, Keir Fraser wrote: > > > >On 20/7/07 22:33, "Zulauf, John" wrote: > > > Has anyone experimented with adding Buffered IO support for "out" > > instructions? Currently, the buffered io pages is only used for mmio > > writes (and then only to vga space). It seems quite straight-forward to > > add. > >Is it safe to buffer, and hence arbitrarily delay, any I/O port write? > > -- Keir > > >_______________________________________________ >Xen-devel mailing list >Xen-devel@lists.xensource.com >http://lists.xensource.com/xen-devel > > >_______________________________________________ >Xen-devel mailing list >Xen-devel@lists.xensource.com >http://lists.xensource.com/xen-devel > >_______________________________________________ >Xen-devel mailing list >Xen-devel@lists.xensource.com >http://lists.xensource.com/xen-devel