From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mateusz Matusiak" Date: Sun, 23 Sep 2007 03:34:57 +0000 Subject: [LARTC] bittorrent traffic... Message-Id: <46f5dee159e2d@wp.pl> List-Id: References: <46f13ae6ae977@wp.pl> In-Reply-To: <46f13ae6ae977@wp.pl> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi, Daniel wrote : with your example above you must use flowid 1:3 at tc filter line. So it should look like this : iptables -A INPUT -m layer7 --l7proto bittorrent -j MARK --set-mark 3 tc filter add dev eth0 protocol ip parent 1:0 handle 3 fw flowid 1:3 are you sure that it will be the proper one ? Will I need to declare the 1:3 flowid somewhere or will that be ok ? As in this example as above I'm not controlling the speed of download by=20 any factor (where to I speficy the kbit I want to give it?) --regards Matt ---------------------------------------------------- Ju=BF 6 pa=BCdziernika w Warszawie P=A6 w Karate Tradycyjnym,=20 tu zwyci=EAstwo samo w sobie nie jest celem ostatecznym...=20 Zobacz wi=EAcej -> http://klik.wp.pl/?adr=3Dhttp%3A%2F%2Fadv.reklama.wp.pl%= 2Fas%2Fpskarate.html&sid2 _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc