From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roland Langner Date: Tue, 02 Oct 2007 15:31:59 +0000 Subject: Re: [lm-sensors] f71882fg and MSI K9AG Neo2-Digital Message-Id: <4702646F.8070206@thelangners.de> List-Id: References: <47011C45.5010808@thelangners.de> In-Reply-To: <47011C45.5010808@thelangners.de> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hans de Goede schrieb: > > Roland Langner wrote: >> >> Hi, >> >> >> >> here is my sensors output for MSI K9AG Neo2-Digital >> >> >> >> k8temp-pci-00c3 >> >> Adapter: PCI adapter >> >> Core0 Temp: >> >> +15=B0C >> >> Core1 Temp: >> >> +15=B0C >> >> >> >> f71882fg-isa-0600 >> >> Adapter: ISA adapter >> >> 3.3V: +3.34 V >> >> Vcore: +0.98 V (max =3D +2.04 V) >> >> Vram: +2.19 V >> >> 5VSB: +5.05 V >> >> +5V: +3.78 V >> >> 12V: +6.51 V >> >> Vchip: +0.48 V >> >> 3VSB: +3.33 V >> >> Battery: +3.20 V >> >> CPU: 844 RPM >> >> System: 0 RPM ALARM >> >> Power: 960 RPM >> >> Aux: 0 RPM ALARM >> >> CPU: +9=B0C (high =3D +85=B0C, hyst =3D +81=B0C) >> >> (crit =3D +100=B0C, hyst =3D +96=B0C) sensor = transistor >> >> System: +92=B0C (high =3D +85=B0C, hyst =3D +81=B0C) ALARM >> >> (crit =3D +100=B0C, hyst =3D +96=B0C) sensor = thermistor >> >> Temp3: +26=B0C (high =3D +70=B0C, hyst =3D +68=B0C) >> >> (crit =3D +85=B0C, hyst =3D +83=B0C) sensor = thermistor >> >> >> >> >> >> Here the config: >> >> >> >> chip "f71882fg-*" >> >> >> >> # Temperature >> >> label temp1 "CPU" >> >> label temp2 "System" >> >> label temp3 "Temp3" >> >> >> >> # Fans >> >> label fan1 "CPU" >> >> label fan2 "System" >> >> label fan3 "Power" >> >> label fan4 "Aux" >> >> >> >> # Voltage >> >> label in0 "3.3V" >> >> label in1 "Vcore" >> >> label in2 "Vram" >> >> label in3 "5VSB" >> >> label in4 "+5V" >> >> label in5 "12V" >> >> label in6 "Vchip" >> >> label in7 "3VSB" >> >> label in8 "Battery" >> >> >> >> # never change the in0, in7 and in8 compute, these are hardwired in the >> >> chip! >> >> compute in0 (@ * 2), (@ / 2) >> >> compute in2 (@ * 2), (@ / 2) >> >> compute in3 (@ * (1+200/47)), (@ / (1+200/47)) >> >> compute in4 (@ * (1+200/47)), (@ / (1+200/47)) >> >> compute in5 (@ * (1+200/20)), (@ / (1+200/20)) >> >> compute in7 (@ * 2), (@ / 2) >> >> compute in8 (@ * 2), (@ / 2) >> >> >> >> >> >> >> >> Some Voltages are not right. (Vcore is) >> >> The board has 3 Fan-conectors. Fan at connector 3 doesn't show up. >> >> CPU Temp is to low. >> >> >> >> Config is a variation of msi P965 Platinum. >> >> Can someone help me with the config? >> >> > > > > Sure, I'm the writer and maintainer of the f71882fg driver and I'll try > > to help. Can you for starters please write down the BIOS sensors > > readings (all of them, in order they appear in the BIOS) and post those, > > then I can try to puzzle the pieces together. > > Hi Hans, sorry, yesterday i didn't replay to the list. thanks for the driver and the help. Here are the BIOS-Values: CPU Temp: 10=B0C System Temp 25=B0C CPU Fan Speed 843 Sys Fan1 Speed 964 CPU Vcore 0.984V 3.3VCC 3.344V 5V 5.088V 12V 12.056V 3.3V SB 3.344V CPU Temp in BIOS seems also a bit to low (room temp is 15=B0C) Regards Roland _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors