From: Boaz Harrosh <bharrosh@panasas.com>
To: James Bottomley <James.Bottomley@SteelEye.com>,
Mike Christie <michaelc@cs.wisc.edu>,
Jeff Garzik <jeff@garzik.org>, Matthew Wilcox <matthew@wil.cx>,
linux-scsi <linux-scsi@vger.kerne>
Subject: [PATCH 03/16] gdth: split out isa probing
Date: Tue, 02 Oct 2007 22:48:16 +0200 [thread overview]
Message-ID: <4702AE90.4020806@panasas.com> (raw)
In-Reply-To: <4702A4A1.2080404@panasas.com>
From: Christoph Hellwig <hch@lst.de>
(note: this is ontop of Jeff's pci cleanup patch)
Split out isa probing into a helper of it's own. Error handling is
cleaned up, but errors are not propagated yet. Also enclose the isa
probe under the proper CONFIG_ISA symbol instead of the !IA64 hack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
---
drivers/scsi/gdth.c | 296 ++++++++++++++++++++++++++++-----------------------
1 files changed, 162 insertions(+), 134 deletions(-)
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index fe5db2d..add2ebb 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -445,13 +445,11 @@ static int gdth_internal_cache_cmd(int hanum,Scsi_Cmnd *scp);
static int gdth_fill_cache_cmd(int hanum,Scsi_Cmnd *scp,ushort hdrive);
static int gdth_search_eisa(ushort eisa_adr);
-static int gdth_search_isa(ulong32 bios_adr);
static int gdth_search_pci(gdth_pci_str *pcistr);
static void gdth_search_dev(gdth_pci_str *pcistr, ushort *cnt,
ushort vendor, ushort dev);
static void gdth_sort_pci(gdth_pci_str *pcistr, int cnt);
static int gdth_init_eisa(ushort eisa_adr,gdth_ha_str *ha);
-static int gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha);
static int gdth_init_pci(gdth_pci_str *pcistr,gdth_ha_str *ha);
static void gdth_enable_int(int hanum);
@@ -476,6 +474,9 @@ static void gdth_flush(int hanum);
static int gdth_halt(struct notifier_block *nb, ulong event, void *buf);
static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
static void gdth_scsi_done(struct scsi_cmnd *scp);
+#ifdef CONFIG_ISA
+static int gdth_isa_probe_one(struct scsi_host_template *, ulong32);
+#endif
#ifdef DEBUG_GDTH
static unchar DebugState = DEBUG_GDTH;
@@ -584,7 +585,10 @@ static struct timer_list gdth_timer;
#define gdth_writew(b,addr) writew((b),(addr))
#define gdth_writel(b,addr) writel((b),(addr))
+#ifdef CONFIG_ISA
static unchar gdth_drq_tab[4] = {5,6,7,7}; /* DRQ table */
+#endif
+
static unchar gdth_irq_tab[6] = {0,10,11,12,14,0}; /* IRQ table */
static unchar gdth_polling; /* polling if TRUE */
static unchar gdth_from_wait = FALSE; /* gdth_wait() */
@@ -838,7 +842,7 @@ static int __init gdth_search_eisa(ushort eisa_adr)
return 0;
}
-
+#ifdef CONFIG_ISA
static int __init gdth_search_isa(ulong32 bios_adr)
{
void __iomem *addr;
@@ -853,7 +857,7 @@ static int __init gdth_search_isa(ulong32 bios_adr)
}
return 0;
}
-
+#endif /* CONFIG_ISA */
static int __init gdth_search_pci(gdth_pci_str *pcistr)
{
@@ -1064,7 +1068,7 @@ static int __init gdth_init_eisa(ushort eisa_adr,gdth_ha_str *ha)
return 1;
}
-
+#ifdef CONFIG_ISA
static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha)
{
register gdt2_dpram_str __iomem *dp2_ptr;
@@ -1163,7 +1167,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha)
ha->dma64_support = 0;
return 1;
}
-
+#endif /* CONFIG_ISA */
static int __init gdth_init_pci(gdth_pci_str *pcistr,gdth_ha_str *ha)
{
@@ -4282,6 +4286,7 @@ int __init option_setup(char *str)
return 1;
}
+
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
static int __init gdth_detect(struct scsi_host_template *shtp)
#else
@@ -4291,7 +4296,6 @@ static int __init gdth_detect(Scsi_Host_Template *shtp)
struct Scsi_Host *shp;
gdth_pci_str pcistr[MAXHA];
gdth_ha_str *ha;
- ulong32 isa_bios;
ushort eisa_slot;
int i,hanum,cnt,ctr,err;
unchar b;
@@ -4328,135 +4332,16 @@ static int __init gdth_detect(Scsi_Host_Template *shtp)
/* As default we do not probe for EISA or ISA controllers */
if (probe_eisa_isa) {
/* scanning for controllers, at first: ISA controller */
- for (isa_bios=0xc8000UL; isa_bios<=0xd8000UL; isa_bios+=0x8000UL) {
- dma_addr_t scratch_dma_handle;
- scratch_dma_handle = 0;
-
- if (gdth_ctr_count >= MAXHA)
+#ifdef CONFIG_ISA
+ ulong32 isa_bios;
+ for (isa_bios = 0xc8000UL; isa_bios <= 0xd8000UL;
+ isa_bios += 0x8000UL) {
+ if (gdth_ctr_count >= MAXHA)
break;
- if (gdth_search_isa(isa_bios)) { /* controller found */
- shp = scsi_register(shtp,sizeof(gdth_ext_str));
- if (shp == NULL)
- continue;
-
- ha = HADATA(shp);
- if (!gdth_init_isa(isa_bios,ha)) {
- scsi_unregister(shp);
- continue;
- }
-#ifdef __ia64__
- break;
-#else
- /* controller found and initialized */
- printk("Configuring GDT-ISA HA at BIOS 0x%05X IRQ %u DRQ %u\n",
- isa_bios,ha->irq,ha->drq);
-
- if (request_irq(ha->irq,gdth_interrupt,IRQF_DISABLED,"gdth",ha)) {
- printk("GDT-ISA: Unable to allocate IRQ\n");
- scsi_unregister(shp);
- continue;
- }
- if (request_dma(ha->drq,"gdth")) {
- printk("GDT-ISA: Unable to allocate DMA channel\n");
- free_irq(ha->irq,ha);
- scsi_unregister(shp);
- continue;
- }
- set_dma_mode(ha->drq,DMA_MODE_CASCADE);
- enable_dma(ha->drq);
- shp->unchecked_isa_dma = 1;
- shp->irq = ha->irq;
- shp->dma_channel = ha->drq;
- hanum = gdth_ctr_count;
- gdth_ctr_tab[gdth_ctr_count++] = shp;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
-
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum= 0;
-
- ha->pccb = CMDDATA(shp);
- ha->ccb_phys = 0L;
- ha->pdev = NULL;
- ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
- &scratch_dma_handle);
- ha->scratch_phys = scratch_dma_handle;
- ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
- &scratch_dma_handle);
- ha->msg_phys = scratch_dma_handle;
-#ifdef INT_COAL
- ha->coal_stat = (gdth_coal_status *)
- pci_alloc_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, &scratch_dma_handle);
- ha->coal_stat_phys = scratch_dma_handle;
-#endif
-
- ha->scratch_busy = FALSE;
- ha->req_first = NULL;
- ha->tid_cnt = MAX_HDRIVES;
- if (max_ids > 0 && max_ids < ha->tid_cnt)
- ha->tid_cnt = max_ids;
- for (i=0; i<GDTH_MAXCMDS; ++i)
- ha->cmd_tab[i].cmnd = UNUSED_CMND;
- ha->scan_mode = rescan ? 0x10 : 0;
-
- if (ha->pscratch == NULL || ha->pmsg == NULL ||
- !gdth_search_drives(hanum)) {
- printk("GDT-ISA: Error during device scan\n");
- --gdth_ctr_count;
- --gdth_ctr_vcount;
-
-#ifdef INT_COAL
- if (ha->coal_stat)
- pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) *
- MAXOFFSETS, ha->coal_stat,
- ha->coal_stat_phys);
-#endif
- if (ha->pscratch)
- pci_free_consistent(ha->pdev, GDTH_SCRATCH,
- ha->pscratch, ha->scratch_phys);
- if (ha->pmsg)
- pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
- ha->pmsg, ha->msg_phys);
-
- free_irq(ha->irq,ha);
- scsi_unregister(shp);
- continue;
- }
- if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
- hdr_channel = ha->bus_cnt;
- ha->virt_bus = hdr_channel;
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,20) && \
- LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
- shp->highmem_io = 0;
-#endif
- if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
- shp->max_cmd_len = 16;
-
- shp->max_id = ha->tid_cnt;
- shp->max_lun = MAXLUN;
- shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
- if (virt_ctr) {
- virt_ctr = 1;
- /* register addit. SCSI channels as virtual controllers */
- for (b = 1; b < ha->bus_cnt + 1; ++b) {
- shp = scsi_register(shtp,sizeof(gdth_num_str));
- shp->unchecked_isa_dma = 1;
- shp->irq = ha->irq;
- shp->dma_channel = ha->drq;
- gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
- NUMDATA(shp)->hanum = (ushort)hanum;
- NUMDATA(shp)->busnum = b;
- }
- }
-
- spin_lock_init(&ha->smp_lock);
- gdth_enable_int(hanum);
-#endif /* !__ia64__ */
- }
+ gdth_isa_probe_one(shtp, isa_bios);
}
+#endif
- /* scanning for EISA controllers */
for (eisa_slot=0x1000; eisa_slot<=0x8000; eisa_slot+=0x1000) {
dma_addr_t scratch_dma_handle;
scratch_dma_handle = 0;
@@ -4754,7 +4639,7 @@ static int gdth_release(struct Scsi_Host *shp)
if (shp->irq) {
free_irq(shp->irq,ha);
}
-#ifndef __ia64__
+#ifdef CONFIG_ISA
if (shp->dma_channel != 0xff) {
free_dma(shp->dma_channel);
}
@@ -5674,6 +5559,149 @@ static Scsi_Host_Template driver_template = {
#endif
};
+#ifdef CONFIG_ISA
+static int gdth_isa_probe_one(struct scsi_host_template *shtp, ulong32 isa_bios)
+{
+ struct Scsi_Host *shp;
+ gdth_ha_str *ha;
+ dma_addr_t scratch_dma_handle = 0;
+ int error, hanum, i;
+ u8 b;
+
+ if (!gdth_search_isa(isa_bios))
+ return -ENXIO;
+
+ shp = scsi_register(shtp, sizeof(gdth_ext_str));
+ if (!shp)
+ return -ENOMEM;
+ ha = HADATA(shp);
+
+ error = -ENODEV;
+ if (!gdth_init_isa(isa_bios,ha))
+ goto out_host_put;
+
+ /* controller found and initialized */
+ printk("Configuring GDT-ISA HA at BIOS 0x%05X IRQ %u DRQ %u\n",
+ isa_bios, ha->irq, ha->drq);
+
+ error = request_irq(ha->irq, gdth_interrupt, IRQF_DISABLED, "gdth", ha);
+ if (error) {
+ printk("GDT-ISA: Unable to allocate IRQ\n");
+ goto out_host_put;
+ }
+
+ error = request_dma(ha->drq, "gdth");
+ if (error) {
+ printk("GDT-ISA: Unable to allocate DMA channel\n");
+ goto out_free_irq;
+ }
+
+ set_dma_mode(ha->drq,DMA_MODE_CASCADE);
+ enable_dma(ha->drq);
+ shp->unchecked_isa_dma = 1;
+ shp->irq = ha->irq;
+ shp->dma_channel = ha->drq;
+ hanum = gdth_ctr_count;
+ gdth_ctr_tab[gdth_ctr_count++] = shp;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum= 0;
+
+ ha->pccb = CMDDATA(shp);
+ ha->ccb_phys = 0L;
+ ha->pdev = NULL;
+
+ error = -ENOMEM;
+
+ ha->pscratch = pci_alloc_consistent(ha->pdev, GDTH_SCRATCH,
+ &scratch_dma_handle);
+ if (!ha->pscratch)
+ goto out_dec_counters;
+ ha->scratch_phys = scratch_dma_handle;
+
+ ha->pmsg = pci_alloc_consistent(ha->pdev, sizeof(gdth_msg_str),
+ &scratch_dma_handle);
+ if (!ha->pmsg)
+ goto out_free_pscratch;
+ ha->msg_phys = scratch_dma_handle;
+
+#ifdef INT_COAL
+ ha->coal_stat = pci_alloc_consistent(ha->pdev,
+ sizeof(gdth_coal_status) * MAXOFFSETS,
+ &scratch_dma_handle);
+ if (!ha->coal_stat)
+ goto out_free_pmsg;
+ ha->coal_stat_phys = scratch_dma_handle;
+#endif
+
+ ha->scratch_busy = FALSE;
+ ha->req_first = NULL;
+ ha->tid_cnt = MAX_HDRIVES;
+ if (max_ids > 0 && max_ids < ha->tid_cnt)
+ ha->tid_cnt = max_ids;
+ for (i = 0; i < GDTH_MAXCMDS; ++i)
+ ha->cmd_tab[i].cmnd = UNUSED_CMND;
+ ha->scan_mode = rescan ? 0x10 : 0;
+
+ error = -ENODEV;
+ if (!gdth_search_drives(hanum)) {
+ printk("GDT-ISA: Error during device scan\n");
+ goto out_free_coal_stat;
+ }
+
+ if (hdr_channel < 0 || hdr_channel > ha->bus_cnt)
+ hdr_channel = ha->bus_cnt;
+ ha->virt_bus = hdr_channel;
+
+ if (ha->cache_feat & ha->raw_feat & ha->screen_feat & GDT_64BIT)
+ shp->max_cmd_len = 16;
+
+ shp->max_id = ha->tid_cnt;
+ shp->max_lun = MAXLUN;
+ shp->max_channel = virt_ctr ? 0 : ha->bus_cnt;
+ if (virt_ctr) {
+ virt_ctr = 1;
+ /* register addit. SCSI channels as virtual controllers */
+ for (b = 1; b < ha->bus_cnt + 1; ++b) {
+ shp = scsi_register(shtp,sizeof(gdth_num_str));
+ shp->unchecked_isa_dma = 1;
+ shp->irq = ha->irq;
+ shp->dma_channel = ha->drq;
+ gdth_ctr_vtab[gdth_ctr_vcount++] = shp;
+ NUMDATA(shp)->hanum = (ushort)hanum;
+ NUMDATA(shp)->busnum = b;
+ }
+ }
+
+ spin_lock_init(&ha->smp_lock);
+ gdth_enable_int(hanum);
+
+ return 0;
+
+ out_free_coal_stat:
+#ifdef INT_COAL
+ pci_free_consistent(ha->pdev, sizeof(gdth_coal_status) * MAXOFFSETS,
+ ha->coal_stat, ha->coal_stat_phys);
+ out_free_pmsg:
+#endif
+ pci_free_consistent(ha->pdev, sizeof(gdth_msg_str),
+ ha->pmsg, ha->msg_phys);
+ out_free_pscratch:
+ pci_free_consistent(ha->pdev, GDTH_SCRATCH,
+ ha->pscratch, ha->scratch_phys);
+ out_dec_counters:
+ gdth_ctr_count--;
+ gdth_ctr_vcount--;
+ out_free_irq:
+ free_irq(ha->irq, ha);
+ out_host_put:
+ scsi_unregister(shp);
+ return error;
+}
+#endif /* CONFIG_ISA */
+
+
#include "scsi_module.c"
#ifndef MODULE
__setup("gdth=", option_setup);
--
1.5.3.1
next prev parent reply other threads:[~2007-10-02 20:48 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-02 20:05 [0/16 ver2] gdth combined patchset & call for testers Boaz Harrosh
2007-10-02 20:40 ` [PATCH 01/16] gdth: Make one abuse of scsi_cmnd less obvious Boaz Harrosh
2007-10-02 20:46 ` [PATCH 02/16] gdth: Stop abusing ->done for internal commands Boaz Harrosh
2007-10-02 20:48 ` Boaz Harrosh [this message]
2007-10-02 20:49 ` [PATCH 04/16] gdth: split out eisa probing Boaz Harrosh
2007-10-02 20:51 ` [PATCH 05/16] gdth: split out pci probing Boaz Harrosh
2007-10-02 20:54 ` [PATCH 06/16] gdth: Remove 2.4.x support, in-kernel changelog Boaz Harrosh
2007-10-02 20:55 ` [PATCH 07/16] gdth: kill gdth_{read,write}[bwl] wrappers Boaz Harrosh
2007-10-02 20:57 ` [PATCH 08/16] gdth: Reorder scsi_host_template intitializers Boaz Harrosh
2007-10-02 20:59 ` [PATCH 09/16] gdth: Remove virt hosts Boaz Harrosh
2007-10-02 21:05 ` [PATCH 10/16] gdth: clean up host private data Boaz Harrosh
2007-10-02 21:08 ` [PATCH 11/16] gdth: gdth_interrupt() gdth_get_status() & gdth_wait() fixes Boaz Harrosh
2007-10-02 21:09 ` [PATCH 12/16] gdth: switch to modern scsi host registration Boaz Harrosh
2007-10-02 21:11 ` [PATCH 13/16] gdth: Remove gdth_ctr_tab[] Boaz Harrosh
2007-10-02 21:14 ` [PATCH 14/16] gdth: Setup proper per-command private data Boaz Harrosh
2007-10-02 21:16 ` [PATCH 15/16] gdth: Move members from SCp to gdth_cmndinfo, stage 2 Boaz Harrosh
2007-10-02 21:18 ` [PATCH 16/16] gdth: !use_sg cleanup and use of scsi accessors Boaz Harrosh
2007-10-02 21:22 ` [0/16 ver2] gdth combined patchset & call for testers Boaz Harrosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4702AE90.4020806@panasas.com \
--to=bharrosh@panasas.com \
--cc=James.Bottomley@SteelEye.com \
--cc=jeff@garzik.org \
--cc=linux-scsi@vger.kerne \
--cc=matthew@wil.cx \
--cc=michaelc@cs.wisc.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.