From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Sicher Subject: dmesg Date: Thu, 04 Oct 2007 03:53:20 +0200 Message-ID: <47044790.1010306@stud.unibas.ch> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------020407030201080903020600" Return-path: Received: from mail20.bluewin.ch ([195.186.19.65]:49732 "EHLO mail20.bluewin.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752694AbXJDB71 (ORCPT ); Wed, 3 Oct 2007 21:59:27 -0400 Received: from localhost.localdomain (83.77.208.90) by mail20.bluewin.ch (Bluewin 7.3.121) id 46F382AC002F6C3D for linux-acpi@vger.kernel.org; Thu, 4 Oct 2007 01:53:27 +0000 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This is a multi-part message in MIME format. --------------020407030201080903020600 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Hello This is the content after a dmesg. (Attachment) Somewhere I were pleased to send you this...I hope you will help me eliminate those errors... michael.sicher@stud.unibas.ch Fasanenstrasse 7 4153 REINACH BL CH --------------020407030201080903020600 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" [michi@localhost ~]$ sudo dmesg Password: Linux version 2.6.22.9-91.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc v ersion 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Sep 27 20:47:39 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fe8cc00 (usable) BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI NVS) BIOS-e820: 000000007fe8ec00 - 000000007fe90c00 (ACPI data) BIOS-e820: 000000007fe90c00 - 0000000080000000 (reserved) BIOS-e820: 00000000d0000000 - 00000000d4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 160) 0 entries of 3200 used Entering add_active_range(0, 256, 523916) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000FEB00, 0024 (r2 DELL ) ACPI: XSDT 000FD25F, 005C (r1 DELL DXP051 7 ASL 61) ACPI: FACP 000FD357, 00F4 (r3 DELL DXP051 7 ASL 61) ACPI: DSDT FFFC7B7D, 32B9 (r1 DELL dt_ex 1000 INTL 20050309) ACPI: FACS 7FE8CC00, 0040 ACPI: SSDT FFFCAF57, 00AC (r1 DELL st_ex 1000 INTL 20050309) ACPI: APIC 000FD44B, 0072 (r1 DELL DXP051 7 ASL 61) ACPI: BOOT 000FD4BD, 0028 (r1 DELL DXP051 7 ASL 61) ACPI: ASF! 000FD4E5, 0067 (r16 DELL DXP051 7 ASL 61) ACPI: MCFG 000FD54C, 003E (r1 DELL DXP051 7 ASL 61) ACPI: HPET 000FD58A, 0038 (r1 DELL DXP051 7 ASL 61) No NUMA configuration found Faking a node at 0000000000000000-000000007fe8c000 Entering add_active_range(0, 0, 160) 0 entries of 3200 used Entering add_active_range(0, 256, 523916) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007fe8c000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 160 0: 256 -> 523916 On node 0 totalpages: 523820 DMA zone: 56 pages used for memmap DMA zone: 1300 pages reserved DMA zone: 2644 pages, LIFO batch:0 DMA32 zone: 7106 pages used for memmap DMA32 zone: 512714 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:50000000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 40968 bytes of per cpu data Built 1 zonelists. Total pages: 515358 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 3391.586 MHz processor. Console: colour VGA+ 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2057260k/2095664k available (2362k kernel code, 38020k reserved, 1400k d ata, 312k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 6787.61 BogoMIPS (lpj=3393808) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12468987 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6783.18 BogoMIPS (lpj=3391590) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) D CPU 3.40GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2048 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMC ONFIG support. PCI: Using MMCONFIG at d0000000 - d3ffffff ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 8 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pnp: 00:01: ioport range 0x800-0x85f has been reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff has been reserved pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved pnp: 00:06: iomem range 0x100000-0xffffff could not be reserved pnp: 00:06: iomem range 0x1000000-0x7fe8cbff could not be reserved pnp: 00:06: iomem range 0xf0000-0xfffff could not be reserved pnp: 00:07: ioport range 0x100-0x1fe could not be reserved pnp: 00:07: ioport range 0x200-0x277 has been reserved pnp: 00:07: ioport range 0x280-0x2e7 has been reserved pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved pnp: 00:07: ioport range 0x300-0x377 could not be reserved pnp: 00:07: ioport range 0x380-0x3bb has been reserved pnp: 00:07: iomem range 0xd0000000-0xd3ffffff could not be reserved pnp: 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fc000000-feafffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fbf00000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: c000-cfff MEM window: fb800000-fbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: f4000000-fb7fffff PREFETCH window: f0000000-f3ffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3777k freed Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) audit(1191467297.460:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key F49647332066F9 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] Allocate Port Service[0000:00:1c.5:pcie03] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not pres ent [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not pres ent [20070126] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 1060k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.1: version 2.11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00 0000000001ffa0 irq 14 ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00 0000000001ffa8 irq 15 usb 1-1: device not accepting address 2, error -71 ata1.00: ATAPI: HL-DT-STDVD+-RW GSA-H21N, A105, max UDMA/33 ata1.00: configured for UDMA/33 ata2: port disabled. ignoring. scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H21N A105 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12 bmdma 0x00 0000000001fea0 irq 20 ata4: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32 bmdma 0x00 0000000001fea8 irq 20 ata3.00: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133 ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32) ata3.01: ATA-7: WDC WD2500JS-75NCB3, 10.02E04, max UDMA/133 ata3.01: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata3.01: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 2:0:0:0: [sda] Attached SCSI disk scsi 2:0:1:0: Direct-Access ATA WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5 sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:1:0: [sdb] 488281250 512-byte hardware sectors (250000 MB) sd 2:0:1:0: [sdb] Write Protect is off sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sd 2:0:1:0: [sdb] Attached SCSI disk usb 5-2: new high speed USB device using ehci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 4 ports detected usb 5-3: new high speed USB device using ehci_hcd and address 4 usb 5-3: configuration #1 chosen from 1 choice usb 5-5: new high speed USB device using ehci_hcd and address 6 usb 5-5: configuration #1 chosen from 1 choice hub 5-5:1.0: USB hub found hub 5-5:1.0: 4 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1 usb 5-2.1: new high speed USB device using ehci_hcd and address 8 usb 5-2.1: configuration #1 chosen from 1 choice usb 5-2.2: new high speed USB device using ehci_hcd and address 9 Initializing USB Mass Storage driver... usb 5-2.2: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 8 usb-storage: waiting for device to settle before scanning scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 9 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usb 5-5.1: new low speed USB device using ehci_hcd and address 10 usb 5-5.1: configuration #1 chosen from 1 choice input: Microsoft Microsoft USB Wireless Mouse as /class/input/input2 input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000: 00:1d.7-5.1 usb 5-5.3: new high speed USB device using ehci_hcd and address 11 usb 5-5.3: configuration #1 chosen from 1 choice hub 5-5.3:1.0: USB hub found hub 5-5.3:1.0: 4 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected usb-storage: device scan complete scsi 6:0:0:0: Direct-Access HP Photosmart 2570 1.00 PQ: 0 ANSI: 2 usb-storage: device scan complete scsi 5:0:0:0: Direct-Access HDS72251 6VLAT20 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdc] Attached SCSI removable disk sd 5:0:0:0: [sdd] 321672960 512-byte hardware sectors (164697 MB) sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 33 00 00 00 sd 5:0:0:0: [sdd] Assuming drive cache: write through sd 5:0:0:0: [sdd] 321672960 512-byte hardware sectors (164697 MB) usb-storage: device scan complete sd 5:0:0:0: [sdd] Write Protect is off sd 5:0:0:0: [sdd] Mode Sense: 33 00 00 00 sd 5:0:0:0: [sdd] Assuming drive cache: write through sdd:<5>scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANS I: 0 sdd1 sd 5:0:0:0: [sdd] Attached SCSI disk scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 sd 4:0:0:0: [sde] Attached SCSI removable disk sd 4:0:0:1: [sdf] Attached SCSI removable disk sd 4:0:0:2: [sdg] Attached SCSI removable disk sd 4:0:0:3: [sdh] Attached SCSI removable disk device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1191467316.487:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1854 types, 84 bools, 1 sens, 1024 cats security: 61 classes, 70584 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1191467316.811:3): policy loaded auid=4294967295 scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:1:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 5:0:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: Attached scsi generic sg5 type 0 sd 4:0:0:1: Attached scsi generic sg6 type 0 sd 4:0:0:2: Attached scsi generic sg7 type 0 sd 4:0:0:3: Attached scsi generic sg8 type 0 sr0: scsi3-mmc drive: 94x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 1 alt 0 pr oto 2 vid 0x03F0 pid 0x4E11 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Floppy drive(s): fd0 is 1.44M ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 Linux video capture interface: v2.00 ivtv: ==================== START INIT IVTV ==================== ivtv: version 1.0.0 (2.6.22.9-91.fc7 SMP mod_unload ) loading ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 17 (level, low) -> IRQ 17 ctossrv: module license 'Creative Proprietary License' taints kernel. Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. emupia: Unknown symbol InterlockedIncrement emupia: Unknown symbol heap_alloc emupia: Unknown symbol stack_free_page emupia: Unknown symbol stack_alloc emupia: Unknown symbol get_ossrv emupia: Unknown symbol unload_all_plugins emupia: Unknown symbol stack_alloc_page emupia: Unknown symbol ioctl_dispatch emupia: Unknown symbol heap_free emupia: Unknown symbol InterlockedDecrement emupia: Unknown symbol stack_free ctsfman: Unknown symbol heap_alloc ctsfman: Unknown symbol get_ossrv ctsfman: Unknown symbol ioctl_dispatch ctsfman: Unknown symbol heap_free ct20xut: Unknown symbol InterlockedIncrement ct20xut: Unknown symbol heap_alloc ct20xut: Unknown symbol unregister_plugin ct20xut: Unknown symbol heap_free ct20xut: Unknown symbol register_plugin ct20xut: Unknown symbol InterlockedDecrement ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes) ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0: Retry loading firmware ctexfifx: Unknown symbol InterlockedDecrement ctexfifx: Unknown symbol register_plugin ctexfifx: Unknown symbol unregister_plugin ctexfifx: Unknown symbol heap_alloc ctexfifx: Unknown symbol InterlockedIncrement ctexfifx: Unknown symbol heap_free cthwiut: Unknown symbol InterlockedIncrement cthwiut: Unknown symbol heap_alloc cthwiut: Unknown symbol unregister_plugin cthwiut: Unknown symbol heap_free cthwiut: Unknown symbol register_plugin cthwiut: Unknown symbol InterlockedDecrement haxfi: Unknown symbol InterlockedDecrement haxfi: Unknown symbol get_ossrv haxfi: Unknown symbol heap_alloc haxfi: Unknown symbol InterlockedIncrement haxfi: Unknown symbol heap_free ctalsa: Unknown symbol bytes_to_order ctalsa: Unknown symbol get_ossrv ctalsa: Unknown symbol heap_alloc ctalsa: Unknown symbol malloc_sizes ctalsa: Unknown symbol ioctl_dispatch ctalsa: Unknown symbol heap_free ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes) ivtv0: did you put the firmware in the hotplug firmware directory? ivtv0: Error initializing firmware ivtv0: Error -19 on initialization ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 ivtv: ==================== END INIT IVTV ==================== e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:72:2c:ba: 25 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 P DT 2007 usbcore: registered new interface driver snd-usb-audio emupia: Unknown symbol InterlockedIncrement emupia: Unknown symbol heap_alloc emupia: Unknown symbol stack_free_page emupia: Unknown symbol stack_alloc emupia: Unknown symbol get_ossrv emupia: Unknown symbol unload_all_plugins emupia: Unknown symbol stack_alloc_page emupia: Unknown symbol ioctl_dispatch emupia: Unknown symbol heap_free emupia: Unknown symbol InterlockedDecrement emupia: Unknown symbol stack_free ctsfman: Unknown symbol heap_alloc ctsfman: Unknown symbol get_ossrv ctsfman: Unknown symbol ioctl_dispatch ctsfman: Unknown symbol heap_free ct20xut: Unknown symbol InterlockedIncrement ct20xut: Unknown symbol heap_alloc ct20xut: Unknown symbol unregister_plugin ct20xut: Unknown symbol heap_free ct20xut: Unknown symbol register_plugin ct20xut: Unknown symbol InterlockedDecrement ctexfifx: Unknown symbol InterlockedDecrement ctexfifx: Unknown symbol register_plugin ctexfifx: Unknown symbol unregister_plugin ctexfifx: Unknown symbol heap_alloc ctexfifx: Unknown symbol InterlockedIncrement ctexfifx: Unknown symbol heap_free cthwiut: Unknown symbol InterlockedIncrement cthwiut: Unknown symbol heap_alloc cthwiut: Unknown symbol unregister_plugin cthwiut: Unknown symbol heap_free cthwiut: Unknown symbol register_plugin cthwiut: Unknown symbol InterlockedDecrement haxfi: Unknown symbol InterlockedDecrement haxfi: Unknown symbol get_ossrv haxfi: Unknown symbol heap_alloc haxfi: Unknown symbol InterlockedIncrement haxfi: Unknown symbol heap_free ctalsa: Unknown symbol bytes_to_order ctalsa: Unknown symbol get_ossrv ctalsa: Unknown symbol heap_alloc ctalsa: Unknown symbol malloc_sizes ctalsa: Unknown symbol ioctl_dispatch ctalsa: Unknown symbol heap_free floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 floppy0: no floppy controllers found No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [VBTN] device-mapper: multipath: version 1.0.5 loaded usb 5-2.2: reset high speed USB device using ehci_hcd and address 9 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sdb1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across: 2031608k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO audit(1191460174.540:4): audit_pid=2119 old=0 by auid=4294967295 subj=system_u:s ystem_r:auditd_t:s0 SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present ppdev: user-space parallel port driver ppdev0: claim the port first ppdev1: claim the port first ppdev2: claim the port first ppdev3: claim the port first lp: driver loaded but no devices found ppdev0: claim the port first ppdev1: claim the port first ppdev2: claim the port first ppdev3: claim the port first [michi@localhost ~]$ --------------020407030201080903020600--