From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4705ED3B.4070600@domain.hid> Date: Fri, 05 Oct 2007 09:52:27 +0200 From: "CHABAL David" MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030203000705090507030408" Subject: [Xenomai-help] awful latencies (~110us) List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai@xenomai.org This is a multi-part message in MIME format. --------------030203000705090507030408 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hello all, My box is a Pentium III 733 Mhz/256Mo with Linux 2.6.20 and Xenomai 2.3.3. When I run the latency test included in the testsuite, I get some horrible results like: RTT| 00:01:04 (periodic user-mode task, 100 us period, priority 99) RTH|-----lat min|-----lat avg|-----lat max|-overrun|----lat best|---lat worst RTD| 4.640| 12.243| 80.454| 0| 3.716| 110.990 RTD| 8.652| 13.133| 86.014| 0| 3.716| ... RTD| 4.050| 13.324| 89.186| 0| 3.716| 110.990 ---|------------|------------|------------|--------|------------------------- RTS| 3.716| 11.499| 110.990| 0| 00:01:22/00:01:22 I expect about 30us. I have tried many kernel configurations without significant results (always about 120us). - BIOS USB Legacy is disabled. - idle=pool is added to the boot line. - linux kernel is minimalist - Ipipe/xenomai debug features have a minor impact - sometimes, the latency is negative. I have noticed a better latency (max: ~31us) with the network disabled (ifdown eth0), and a deterioration immediatly after typing ifup (~120us, like above). (Usually, I connect this box through Exceed. I have other PC with Xenomai and it is without consequence on their latency tests). If someone has a clue, I get it !! Thanks in advance, David --------------030203000705090507030408 Content-Type: text/plain; name="config.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="config.txt" # # Automatically generated make config: don't edit # Linux kernel version: 2.6.20 # Fri Jan 5 09:20:24 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # # CONFIG_EXPERIMENTAL is not set CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_SYSFS_DEPRECATED=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # CONFIG_BLOCK=y CONFIG_LBD=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_LSF=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Real-time sub-system # CONFIG_XENOMAI=y CONFIG_XENO_OPT_NUCLEUS=y CONFIG_XENO_OPT_PERVASIVE=y CONFIG_XENO_OPT_ISHIELD=y # CONFIG_XENO_OPT_RPIDISABLE is not set CONFIG_XENO_OPT_PIPELINE_HEAD=y CONFIG_XENO_OPT_PIPE=y CONFIG_XENO_OPT_PIPE_NRDEV=32 CONFIG_XENO_OPT_REGISTRY=y CONFIG_XENO_OPT_REGISTRY_NRSLOTS=512 CONFIG_XENO_OPT_SYS_HEAPSZ=128 CONFIG_XENO_OPT_STATS=y CONFIG_XENO_OPT_DEBUG=y # CONFIG_XENO_OPT_DEBUG_NUCLEUS is not set # CONFIG_XENO_OPT_DEBUG_QUEUES is not set CONFIG_XENO_OPT_WATCHDOG=y # # Timing # # CONFIG_XENO_OPT_TIMING_PERIODIC is not set CONFIG_XENO_OPT_TIMING_PERIOD=0 CONFIG_XENO_OPT_TIMING_TIMERLAT=0 CONFIG_XENO_OPT_TIMING_SCHEDLAT=0 # # Scalability # # CONFIG_XENO_OPT_SCALABLE_SCHED is not set CONFIG_XENO_OPT_TIMER_LIST=y # CONFIG_XENO_OPT_TIMER_HEAP is not set # CONFIG_XENO_OPT_TIMER_WHEEL is not set # # Shared interrupts # CONFIG_XENO_OPT_SHIRQ_LEVEL=y # CONFIG_XENO_OPT_SHIRQ_EDGE is not set # # Machine # CONFIG_XENO_HW_FPU=y # # NMI watchdog # # # SMI workaround # # CONFIG_XENO_HW_SMI_DETECT_DISABLE is not set CONFIG_XENO_HW_SMI_DETECT=y CONFIG_XENO_HW_SMI_WORKAROUND=y CONFIG_XENO_HW_SMI_ALL=y # # Interfaces # CONFIG_XENO_SKIN_NATIVE=y CONFIG_XENO_OPT_NATIVE_PIPE=y CONFIG_XENO_OPT_NATIVE_PIPE_BUFSZ=4096 CONFIG_XENO_OPT_NATIVE_REGISTRY=y CONFIG_XENO_OPT_NATIVE_SEM=y CONFIG_XENO_OPT_NATIVE_EVENT=y CONFIG_XENO_OPT_NATIVE_MUTEX=y CONFIG_XENO_OPT_NATIVE_COND=y CONFIG_XENO_OPT_NATIVE_QUEUE=y CONFIG_XENO_OPT_NATIVE_HEAP=y CONFIG_XENO_OPT_NATIVE_ALARM=y CONFIG_XENO_OPT_NATIVE_MPS=y CONFIG_XENO_OPT_NATIVE_INTR=y # CONFIG_XENO_SKIN_POSIX is not set # CONFIG_XENO_SKIN_PSOS is not set # CONFIG_XENO_SKIN_UITRON is not set # CONFIG_XENO_SKIN_VRTX is not set # CONFIG_XENO_SKIN_VXWORKS is not set # CONFIG_XENO_SKIN_RTAI is not set CONFIG_XENO_SKIN_RTDM=y CONFIG_XENO_OPT_RTDM_FILDES=128 CONFIG_XENO_OPT_DEBUG_RTDM=y # # Drivers # # # Serial drivers # CONFIG_XENO_DRIVERS_16550A=y # # Testing drivers # CONFIG_XENO_DRIVERS_TIMERBENCH=y CONFIG_XENO_DRIVERS_IRQBENCH=y CONFIG_XENO_DRIVERS_SWITCHTEST=y # # CAN drivers # # CONFIG_XENO_DRIVERS_CAN is not set # # Processor type and features # # CONFIG_SMP is not set CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUMM is not set # CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_IPIPE=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=m CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # # Firmware Drivers # CONFIG_EDD=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set # CONFIG_MATH_EMULATION is not set # CONFIG_MTRR is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_KEXEC=y CONFIG_PHYSICAL_START=0x100000 CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_COMPAT_VDSO=y # # Power management options (ACPI, APM) # # CONFIG_PM is not set # # ACPI (Advanced Configuration and Power Interface) Support # # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCIEPORTBUS is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=m # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_DEBUG=y # # Protocols # CONFIG_ISAPNP=y # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32000 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_ATA_OVER_ETH is not set # # Misc devices # # CONFIG_SGI_IOC4 is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=m # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_OFFBOARD=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_CS5535 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # # CONFIG_ATA is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y CONFIG_I2O_EXT_ADAPTEC=y # CONFIG_I2O_CONFIG is not set # CONFIG_I2O_BUS is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set CONFIG_VORTEX=y # CONFIG_TYPHOON is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set # CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # CONFIG_WAN=y CONFIG_HOSTESS_SV11=m CONFIG_COSA=m CONFIG_LANMEDIA=m CONFIG_SEALEVEL_4021=m CONFIG_HDLC=m CONFIG_HDLC_RAW=m CONFIG_HDLC_RAW_ETH=m CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m # # X.25/LAPB support is disabled # CONFIG_PCI200SYN=m CONFIG_WANXL=m CONFIG_PC300=m # # Cyclades-PC300 MLPPP support is disabled. # # # Refer to the file README.mlppp, provided by PC300 package. # CONFIG_N2=m CONFIG_C101=m CONFIG_FARSYNC=m CONFIG_DSCC4=m CONFIG_DSCC4_PCISYNC=y CONFIG_DSCC4_PCI_RST=y CONFIG_DLCI=m CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 # CONFIG_SDLA is not set CONFIG_SBNI=m CONFIG_SBNI_MULTILINE=y # CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m CONFIG_SERIO_CT82C710=m CONFIG_SERIO_PCIPS2=m CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_INTEL=m # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=m CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=m # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=m CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD8111=m # CONFIG_I2C_ELEKTOR is not set CONFIG_I2C_I801=m CONFIG_I2C_I810=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_PROSAVAGE=m # CONFIG_SCx200_ACB is not set CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m CONFIG_I2C_VIAPRO=m CONFIG_I2C_VOODOO3=m CONFIG_I2C_PCA_ISA=m # # Miscellaneous I2C Chip support # # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FIRMWARE_EDID=y CONFIG_FB=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set CONFIG_FB_VGA16=m CONFIG_FB_VESA=y # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # HID Devices # CONFIG_HID=y # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # # USB Network Adapters # # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # # Real Time Clock # # # DMA Engine support # # CONFIG_DMA_ENGINE is not set # # DMA Clients # # # DMA Devices # # # Virtualization # # # File systems # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=m # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=m CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_IPIPE_DEBUG=y CONFIG_IPIPE_DEBUG_CONTEXT=y CONFIG_IPIPE_TRACE=y CONFIG_IPIPE_TRACE_ENABLE=y CONFIG_IPIPE_TRACE_MCOUNT=y CONFIG_IPIPE_TRACE_IRQSOFF=y CONFIG_IPIPE_TRACE_SHIFT=14 # CONFIG_IPIPE_TRACE_VMALLOC is not set CONFIG_IPIPE_TRACE_PANIC=y CONFIG_IPIPE_TRACE_ENABLE_VALUE=1 # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y CONFIG_EARLY_PRINTK=y CONFIG_DOUBLEFAULT=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_PLIST=y CONFIG_IOMAP_COPY=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y --------------030203000705090507030408 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.6.20 (root@domain.hid) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #31 Thu Oct 4 16:33:33 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e5c00 size: 000000000001a400 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000000fdf0000 end: 000000000fef0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000fef0000 size: 000000000000fc00 end: 000000000feffc00 type: 3 copy_e820_map() start: 000000000feffc00 size: 0000000000000400 end: 000000000ff00000 type: 4 copy_e820_map() start: 000000000ff00000 size: 0000000000100000 end: 0000000010000000 type: 2 copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e5c00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data) BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS) BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 254MB LOWMEM available. Entering add_active_range(0, 0, 65264) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65264 early_node_map[1] active PFN ranges 0: 0 -> 65264 On node 0 totalpages: 65264 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 477 pages used for memmap Normal zone: 60691 pages, LIFO batch:15 DMI 2.2 present. Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000) Detected 731.008 MHz processor. Built 1 zonelists. Total pages: 64755 Kernel command line: auto BOOT_IMAGE=2.6.20 root=305 resume=/dev/hda1 idle=pool Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) I-pipe 1.8-06: pipeline enabled. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 255452k/261056k available (1779k kernel code, 5112k reserved, 536k data, 176k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffffd000 - 0xfffff000 ( 8 kB) vmalloc : 0xd0800000 - 0xffffb000 ( 759 MB) lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB) .init : 0xc0346000 - 0xc0372000 ( 176 kB) .data : 0xc02bce99 - 0xc03431ac ( 536 kB) .text : 0xc0100000 - 0xc02bce99 (1779 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1462.94 BogoMIPS (lpj=2925886) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel Pentium III (Coppermine) stepping 06 Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2410] at 0000:00:1f.0 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:1f.2 pnp: the driver 'system' has been registered PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: ec100000-ec1fffff PREFETCH window: 20000000-200fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 120k freed audit: initializing netlink socket (disabled) audit(1167985878.464:1): initialized audit: cannot initialize inotify handle I-pipe: Domain Xenomai registered. Xenomai: hal/x86 started. I-pipe: Domain IShield registered. Xenomai: real-time nucleus v2.3.3 (Summer Song) loaded. Xenomai: SMI-enabled chipset found, enabling SMI workaround. Xenomai: starting native API services. Xenomai: starting RTDM services. Total HugeTLB memory allocated, 0 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize PCI: setting IRQ 5 as level-triggered PCI: Found IRQ 5 for device 0000:01:04.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:01:04.0: 3Com PCI 3c905C Tornado at d0982000. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH: IDE controller at PCI slot 0000:00:1f.1 ICH: chipset revision 2 ICH: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 31024H1, ATA DISK drive hdb: ST310211A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-540E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 19746720 sectors (10110 MB) w/2048KiB Cache, CHS=19590/16/63, UDMA(66) hda: cache flushes not supported hda: hda1 hda2 < hda5 > hdb: max request size: 128KiB hdb: 19541088 sectors (10005 MB) w/512KiB Cache, CHS=19386/16/63, UDMA(66) hdb: cache flushes not supported hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 > USB Universal Host Controller Interface driver v3.0 PCI: Enabling device 0000:00:1f.2 (0000 -> 0001) PCI: Found IRQ 11 for device 0000:00:1f.2 PCI: Setting latency timer of device 0000:00:1f.2 to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 11, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected pnp: the driver 'i8042 kbd' has been registered pnp: the driver 'i8042 aux' has been registered pnp: the driver 'i8042 kbd' has been unregistered pnp: the driver 'i8042 aux' has been unregistered PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice pnp: the driver 'irqbench' has been registered TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Time: tsc clocksource has been installed. BIOS EDD facility v0.16 2004-Jun-25, 2 devices found Freeing unused kernel memory: 176k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: ImPS/2 Logitech Wheel Mouse as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0xf0000000 EXT3 FS on hda5, internal journal Adding 273064k swap on /dev/hda1. Priority:-1 extents:1 across:273064k kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. hdc: ATAPI 40X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 eth0: setting full-duplex. --------------030203000705090507030408 Content-Type: text/plain; name="interrupts" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="interrupts" CPU0 0: 125337 XT-PIC-XT timer 1: 16 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 5: 214682 XT-PIC-XT eth0 8: 1 XT-PIC-XT rtc 11: 0 XT-PIC-XT uhci_hcd:usb1 12: 131 XT-PIC-XT i8042 14: 29438 XT-PIC-XT ide0 15: 4120 XT-PIC-XT ide1 NMI: 0 ERR: 0 --------------030203000705090507030408 Content-Type: text/plain; name="max" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="max" I-pipe worst-case tracing service on 2.6.20/ipipe-1.8-06 ------------------------------------------------------------ ******** WARNING ******** The following debugging options will increase the observed latencies: o CONFIG_XENO_OPT_DEBUG Begin: 190142984429 cycles, Trace Points: 21 (-10/+1), Length: 63 us Calibrated minimum trace-point overhead: 0.248 us +--------------- Hard IRQs ('|': locked) | +- Delay flag ('+': > 1 us, '!': > 10 us) | | Type Time Function (Parent) func -5 ipipe_check_context (dev_hard_start_xmit) func -4 skb_clone (dev_hard_start_xmit) func -4 kmem_cache_alloc (skb_clone) func -4 ipipe_check_context (kmem_cache_alloc) func -3 __ipipe_restore_root (kmem_cache_alloc) func -3 __ipipe_unstall_root (__ipipe_restore_root) |begin -3 __ipipe_unstall_root (__ipipe_restore_root) |end -2 __ipipe_unstall_root (__ipipe_restore_root) func -2 packet_rcv_spkt (dev_hard_start_xmit) func -1 strlcpy (packet_rcv_spkt) >|begin 0 common_interrupt (__ipipe_trace) :|func 0 __ipipe_handle_irq (common_interrupt) :|func 0 __ipipe_ack_irq (__ipipe_handle_irq) :|func 1 __ipipe_ack_level_irq (__ipipe_ack_irq) :|func 1 mask_and_ack_8259A (__ipipe_ack_level_irq) :|func 1! __ipipe_spin_lock_irqsave (mask_and_ack_8259A) :|func 29 __ipipe_spin_unlock_irqrestore (mask_and_ack_8259A) :|func 29 __ipipe_dispatch_wired (__ipipe_handle_irq) :|func 29 xnintr_clock_handler (__ipipe_dispatch_wired) :|func 30 xnintr_irq_handler (xnintr_clock_handler) :|func 30 xnpod_announce_tick (xnintr_irq_handler) :|func 30 xntimer_do_tick_aperiodic (xnpod_announce_tick) :|func 31 xnthread_periodic_handler (xntimer_do_tick_aperiodic) :|func 31 xnpod_resume_thread (xnthread_periodic_handler) :|[ 3813] 32! xnpod_resume_thread (xnthread_periodic_handler) :|func 60 xnpod_schedule (xnintr_irq_handler) :|[ 3391] 60+ xnpod_schedule (xnintr_irq_handler) :|func 62 __switch_to (xnpod_schedule) :|[ 3813] 62 xnpod_schedule (xnpod_suspend_thread) :|func 63 __ipipe_restore_pipeline_head (xnpod_wait_thread_period) <|end 63 __ipipe_restore_pipeline_head (xnpod_wait_thread_period) |begin 64 __ipipe_dispatch_event (__ipipe_syscall_root) --------------030203000705090507030408--