[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 05:28:36 GMT 2007 (Ubuntu 2.6.22-14.43-generic) [ 0.000000] Command line: root=UUID=578a9856-a643-4dce-80d1-3a46b592e90a ro quiet splash locale=de_DE irqpoll acpi_osi=!Linux [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bf00000 (usable) [ 0.000000] BIOS-e820: 000000003bf00000 - 000000003bf15000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bf15000 - 000000003bf80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 245504) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F88F0 checksum 0 [ 0.000000] ACPI: RSDP 000F88F0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 3BF0BD24, 003C (r1 HPQOEM SLIC-MPC 6040000 LTP 0) [ 0.000000] ACPI: FACP 3BF14D10, 0074 (r1 HP MCP51M 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT 3BF0BD60, 8FB0 (r1 HP MCP51M 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 3BF15FC0, 0040 [ 0.000000] ACPI: SSDT 3BF14D84, 0182 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: MCFG 3BF14F06, 003C (r1 HP MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 3BF14F42, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC 3BF14F7A, 005E (r1 HP APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3BF14FD8, 0028 (r1 HP $SBFTBL$ 6040000 LTP 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003bf00000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 245504) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003bf00000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 245504 [ 0.000000] On node 0 totalpages: 245405 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2816 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3300 pages used for memmap [ 0.000000] DMA32 zone: 238108 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 240924 [ 0.000000] Kernel command line: root=UUID=578a9856-a643-4dce-80d1-3a46b592e90a ro quiet splash locale=de_DE irqpoll acpi_osi=!Linux [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] ACPI: Disabled _OSI(Linux) [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 13.809479] time.c: Detected 1607.315 MHz processor. [ 13.812766] Console: colour VGA+ 80x25 [ 13.812786] Checking aperture... [ 13.812789] CPU 0: aperture @ 0 size 32 MB [ 13.819909] No AGP bridge found [ 13.832038] Memory: 956328k/982016k available (2274k kernel code, 25292k reserved, 1181k data, 296k init) [ 13.832088] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 13.911274] Calibrating delay using timer specific routine.. 3228.96 BogoMIPS (lpj=6457935) [ 13.911308] Security Framework v1.0.0 initialized [ 13.911314] SELinux: Disabled at boot. [ 13.911422] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.912096] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 13.912421] Mount-cache hash table entries: 256 [ 13.912561] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 13.912565] CPU: L2 Cache: 512K (64 bytes/line) [ 13.912568] CPU 0/0 -> Node 0 [ 13.912570] CPU: Physical Processor ID: 0 [ 13.912572] CPU: Processor Core ID: 0 [ 13.912592] SMP alternatives: switching to UP code [ 13.912838] Early unpacking initramfs... done [ 14.280046] ACPI: Core revision 20070126 [ 14.280131] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 14.327493] Using local APIC timer interrupts. [ 14.389704] result 12557144 [ 14.389706] Detected 12.557 MHz APIC timer. [ 14.391266] SMP alternatives: switching to SMP code [ 14.391371] Booting processor 1/2 APIC 0x1 [ 14.402162] Initializing CPU#1 [ 14.479732] Calibrating delay using timer specific routine.. 3214.50 BogoMIPS (lpj=6429016) [ 14.479739] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 14.479742] CPU: L2 Cache: 512K (64 bytes/line) [ 14.479745] CPU 1/1 -> Node 0 [ 14.479747] CPU: Physical Processor ID: 0 [ 14.479749] CPU: Processor Core ID: 1 [ 14.479842] AMD Turion(tm) 64 X2 Mobile Technology TL-52 stepping 02 [ 14.483195] Brought up 2 CPUs [ 14.556926] migration_cost=286 [ 14.556557] NET: Registered protocol family 16 [ 14.556654] ACPI: bus type pci registered [ 14.556661] PCI: Using configuration type 1 [ 14.557683] ACPI: EC: Look up EC in DSDT [ 14.558220] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 14.560001] ACPI: System BIOS is requesting _OSI(Linux) [ 14.560004] ACPI: Please test with "acpi_osi=!Linux" [ 14.560005] Please send dmidecode to linux-acpi@vger.kernel.org [ 14.560273] ACPI: Interpreter enabled [ 14.560276] ACPI: (supports S0 S3 S4 S5) [ 14.560294] ACPI: Using IOAPIC for interrupt routing [ 14.569504] ACPI: EC: GPE=0x10, ports=0x66, 0x62 [ 14.569591] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 14.569599] PCI: Probing PCI hardware (bus 00) [ 14.570610] PCI: Transparent bridge - 0000:00:10.0 [ 14.570644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 14.570759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 14.570793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 14.570829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 14.609220] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled. [ 14.609448] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 14.609672] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 14.609895] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 14.610118] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 14.610341] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 14.610566] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11 [ 14.610791] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled. [ 14.611013] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 14.611393] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10 [ 14.611617] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11 [ 14.611840] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 14.612064] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10 [ 14.612295] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled. [ 14.612518] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled. [ 14.612741] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled. [ 14.612967] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled. [ 14.613200] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5 [ 14.613423] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10 [ 14.613593] Linux Plug and Play Support v0.97 (c) Adam Belay [ 14.613608] pnp: PnP ACPI init [ 14.613619] ACPI: bus type pnp registered [ 14.616818] pnp: PnP ACPI: found 13 devices [ 14.616821] ACPI: ACPI bus type pnp unregistered [ 14.616886] PCI: Using ACPI for IRQ routing [ 14.616889] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 14.616980] NET: Registered protocol family 8 [ 14.616983] NET: Registered protocol family 20 [ 14.617068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 14.617074] hpet0: 3 32-bit timers, 25000000 Hz [ 14.618143] pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.618150] pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved [ 14.618154] pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 14.618158] pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved [ 14.618162] pnp: 00:01: iomem range 0xfed00000-0xfed00fff has been reserved [ 14.618169] pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be reserved [ 14.618175] pnp: 00:04: ioport range 0x1000-0x107f has been reserved [ 14.618179] pnp: 00:04: ioport range 0x1080-0x10ff has been reserved [ 14.618182] pnp: 00:04: ioport range 0x1400-0x147f has been reserved [ 14.618186] pnp: 00:04: ioport range 0x1480-0x14ff has been reserved [ 14.618190] pnp: 00:04: ioport range 0x1800-0x187f has been reserved [ 14.618193] pnp: 00:04: ioport range 0x1880-0x18ff has been reserved [ 14.618197] pnp: 00:04: ioport range 0x2000-0x203f has been reserved [ 14.618556] PCI: Bridge: 0000:00:02.0 [ 14.618559] IO window: 4000-4fff [ 14.618564] MEM window: b4000000-b5ffffff [ 14.618567] PREFETCH window: d0000000-d01fffff [ 14.618570] PCI: Bridge: 0000:00:03.0 [ 14.618572] IO window: disabled. [ 14.618578] MEM window: b6000000-b7ffffff [ 14.618580] PREFETCH window: disabled. [ 14.618583] PCI: Bridge: 0000:00:10.0 [ 14.618585] IO window: disabled. [ 14.618588] MEM window: disabled. [ 14.618591] PREFETCH window: disabled. [ 14.618602] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 14.618610] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 14.618618] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 14.618678] NET: Registered protocol family 2 [ 14.619718] Time: hpet clocksource has been installed. [ 14.671205] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 14.671648] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 14.673828] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 14.674523] TCP: Hash tables configured (established 131072 bind 65536) [ 14.674528] TCP reno registered [ 14.687283] checking if image is initramfs... it is [ 15.398367] Freeing initrd memory: 7199k freed [ 15.403317] Simple Boot Flag at 0x36 set to 0x1 [ 15.404592] audit: initializing netlink socket (disabled) [ 15.404610] audit(1192129415.540:1): initialized [ 15.406934] VFS: Disk quotas dquot_6.5.1 [ 15.406993] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 15.407097] io scheduler noop registered [ 15.407100] io scheduler anticipatory registered [ 15.407102] io scheduler deadline registered [ 15.407209] io scheduler cfq registered (default) [ 15.407232] Boot video device is 0000:00:05.0 [ 15.624192] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 15.624217] assign_interrupt_mode Found MSI capability [ 15.624221] Allocate Port Service[0000:00:02.0:pcie00] [ 15.624293] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 15.624316] assign_interrupt_mode Found MSI capability [ 15.624319] Allocate Port Service[0000:00:03.0:pcie00] [ 15.652578] Real Time Clock Driver v1.12ac [ 15.652777] hpet_resources: 0xfed00000 is busy [ 15.652823] Linux agpgart interface v0.102 (c) Dave Jones [ 15.652827] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 15.654008] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 15.654247] input: Macintosh mouse button emulation as /class/input/input0 [ 15.654330] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 15.672988] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 15.672996] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 15.673138] mice: PS/2 mouse device common for all mice [ 15.673301] TCP cubic registered [ 15.673362] NET: Registered protocol family 1 [ 15.673582] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 15.673590] Freeing unused kernel memory: 296k freed [ 15.691081] input: AT Translated Set 2 keyboard as /class/input/input1 [ 16.899271] AppArmor: AppArmor initialized<5>audit(1192129417.032:2): type=1505 info="AppArmor initialized" pid=1273 [ 16.907299] fuse init (API version 7.8) [ 16.911822] Failure registering capabilities with primary security module. [ 16.945763] ACPI: Thermal Zone [THRM] (79 C) [ 17.520068] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 17.520075] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 17.524962] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 [ 17.524985] NFORCE-MCP51: chipset revision 241 [ 17.524988] NFORCE-MCP51: not 100% native mode: will probe irqs later [ 17.524993] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround. [ 17.524999] NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller [ 17.525009] ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio [ 17.525021] Probing IDE interface ide0... [ 17.542670] SCSI subsystem initialized [ 17.552923] libata version 2.21 loaded. [ 17.583837] usbcore: registered new interface driver usbfs [ 17.583867] usbcore: registered new interface driver hub [ 17.583901] usbcore: registered new device driver usb [ 17.595142] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 17.599639] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 18.306801] hda: Optiarc DVD RW AD-7530A, ATAPI CD/DVD-ROM drive [ 19.028944] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 19.030070] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 19.030081] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 22 [ 19.030251] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.030259] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 19.030724] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1 [ 19.030749] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xb0004000 [ 19.093035] usb usb1: configuration #1 chosen from 1 choice [ 19.093238] hub 1-0:1.0: USB hub found [ 19.093249] hub 1-0:1.0: 8 ports detected [ 19.199529] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 19.199541] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 20 [ 19.199549] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 19.199558] forcedeth: using HIGHDMA [ 19.199578] 0000:00:14.0: Invalid Mac address detected: 00:00:00:00:00:00 [ 19.199581] Please complain to your hardware vendor. Switching to a random MAC. [ 19.216854] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA [ 19.216864] Uniform CD-ROM driver Revision: 3.20 [ 19.514511] usb 1-6: new low speed USB device using ohci_hcd and address 2 [ 19.727022] eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0 [ 19.727566] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 19.727570] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 22 [ 19.728188] PCI: Setting latency timer of device 0000:00:0b.1 to 64 [ 19.728195] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 19.728573] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2 [ 19.728609] ehci_hcd 0000:00:0b.1: debug port 1 [ 19.728614] PCI: cache line size of 64 is not supported by device 0000:00:0b.1 [ 19.728622] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xb0005000 [ 19.728632] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 19.729035] usb usb2: configuration #1 chosen from 1 choice [ 19.729220] hub 2-0:1.0: USB hub found [ 19.729227] hub 2-0:1.0: 8 ports detected [ 19.733185] usb 1-6: configuration #1 chosen from 1 choice [ 19.736076] usb 1-6: can't set config #1, error -62 [ 19.736147] usb 1-6: USB disconnect, address 2 [ 19.835559] sata_nv 0000:00:0e.0: version 3.4 [ 19.835577] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007) [ 19.835966] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23 [ 19.835977] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 23 [ 19.836192] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.836558] scsi0 : sata_nv [ 19.836627] scsi1 : sata_nv [ 19.836701] ata1: SATA max UDMA/133 cmd 0x00000000000130c0 ctl 0x00000000000130b6 bmdma 0x0000000000013090 irq 23 [ 19.836706] ata2: SATA max UDMA/133 cmd 0x00000000000130b8 ctl 0x00000000000130b2 bmdma 0x0000000000013098 irq 23 [ 20.314418] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 20.326589] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7BP, max UDMA/100 [ 20.326593] ata1.00: 312581808 sectors, multi 16: LBA48 [ 20.350583] ata1.00: configured for UDMA/100 [ 20.355029] usb 1-6: new low speed USB device using ohci_hcd and address 3 [ 20.570059] usb 1-6: configuration #1 chosen from 1 choice [ 20.670360] ata2: SATA link down (SStatus 0 SControl 300) [ 20.681807] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 20.687489] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.687505] sd 0:0:0:0: [sda] Write Protect is off [ 20.687509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.687525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.687580] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 20.687589] sd 0:0:0:0: [sda] Write Protect is off [ 20.687593] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 20.687607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 20.687612] sda: sda1 sda2 sda3 <<6>usbcore: registered new interface driver hiddev [ 20.718346] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [ 20.718523] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-6 [ 20.718540] usbcore: registered new interface driver usbhid [ 20.718544] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 20.726774] sda5 > [ 20.726897] sd 0:0:0:0: [sda] Attached SCSI disk [ 20.730496] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.975853] Attempting manual resume [ 20.975858] swsusp: Resume From Partition 8:5 [ 20.975860] PM: Checking swsusp image. [ 20.976091] PM: Resume from disk failed. [ 21.024599] kjournald starting. Commit interval 5 seconds [ 21.025171] EXT3-fs: mounted filesystem with ordered data mode. [ 30.657748] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 30.669493] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.779589] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 30.779624] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 31.000697] nvidia: module license 'NVIDIA' taints kernel. [ 31.277909] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 18 [ 31.277923] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 18 (level, high) -> IRQ 18 [ 31.277932] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 31.278113] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 31.324199] input: PC Speaker as /class/input/input3 [ 31.347312] ieee80211_crypt: registered algorithm 'NULL' [ 31.350025] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 31.350029] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 31.414105] bcm43xx driver [ 31.414617] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 31.414629] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, high) -> IRQ 19 [ 31.414641] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 31.682608] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 31.682622] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 21 [ 31.682856] PCI: Setting latency timer of device 0000:00:10.1 to 64 [ 31.922036] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000 [ 31.984801] input: SynPS/2 Synaptics TouchPad as /class/input/input4 [ 32.583462] lp: driver loaded but no devices found [ 32.675021] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k [ 33.092689] EXT3 FS on sda1, internal journal [ 34.603169] No dock devices found. [ 34.677177] ACPI: AC Adapter [ACAD] (on-line) [ 34.712772] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 34.715955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 34.738102] ACPI: Battery Slot [BAT0] (battery present) [ 34.826584] input: Power Button (FF) as /class/input/input5 [ 34.826609] ACPI: Power Button (FF) [PWRF] [ 34.826658] input: Power Button (CM) as /class/input/input6 [ 34.826677] ACPI: Power Button (CM) [PWRB] [ 34.826722] input: Sleep Button (CM) as /class/input/input7 [ 34.826739] ACPI: Sleep Button (CM) [SLPB] [ 34.826783] input: Lid Switch as /class/input/input8 [ 34.826798] ACPI: Lid Switch [LID] [ 35.145672] powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-52 processors (version 2.00.00) [ 35.145198] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13 [ 35.145204] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e [ 36.340591] ppdev: user-space parallel port driver [ 36.737781] audit(1192129437.375:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5161 profile="/usr/sbin/cupsd" [ 38.331310] Failure registering capabilities with primary security module. [ 38.603448] Bluetooth: Core ver 2.11 [ 38.603573] NET: Registered protocol family 31 [ 38.603577] Bluetooth: HCI device and connection manager initialized [ 38.603581] Bluetooth: HCI socket layer initialized [ 38.613343] Bluetooth: L2CAP ver 2.8 [ 38.613349] Bluetooth: L2CAP socket layer initialized [ 38.661763] Bluetooth: RFCOMM socket layer initialized [ 38.661785] Bluetooth: RFCOMM TTY layer initialized [ 38.661790] Bluetooth: RFCOMM ver 1.8 [ 42.141826] NET: Registered protocol family 17 [ 44.956712] NET: Registered protocol family 10 [ 44.956830] lo: Disabled Privacy Extensions [ 44.957094] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 50.989675] eth74: no IPv6 routers present