From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Sun, 14 Oct 2007 07:13:39 +0000 Subject: Re: [lm-sensors] Abituguru needs force=y Message-Id: <4711C1A3.5080304@hhs.nl> List-Id: References: <470DDE3C.1050209@hhs.nl> In-Reply-To: <470DDE3C.1050209@hhs.nl> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > On Thu, 11 Oct 2007 10:26:36 +0200, Hans de Goede wrote: >> Graham Murray wrote: >>> Hans de Goede writes: >>> >>>> Interesting, thanks for the notification. The version in 2.6.23 check >>>> a few DMI strings to make sure its running on an Abit motherboard >>>> before randomly bit banging some io-ports. So I guess your motherboard >>>> has different DMI strings then most, can you please mail me the output >>>> of the dmidecode command? Then I'll make sure this gets fixed in >>>> 2.6.24. >>> I think that the problem is that DMI does not work on my system. At boot >>> I get the message "DMI not present or invalid" and running dmidecode >>> confirms this. For the i386, there is no user option to disable DMI >>> during kernel configuration. >>> >>> newton ~ # dmidecode >>> # dmidecode 2.9 >>> # No SMBIOS nor DMI entry point found, sorry. >>> >> Hmm, >> >> Have you tried updating your BIOS? > > Was there an answer to this question? > Nope. Regards, Hans _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors