All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott Petler <scottp@sonic.net>
To: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PROBLEM: kernel panic
Date: Sun, 14 Oct 2007 13:44:24 -0700	[thread overview]
Message-ID: <47127FA8.6040506@sonic.net> (raw)
In-Reply-To: <1192393469.7573.8.camel@heimdal.trondhjem.org>

Trond,

I'm not exactly sure how to go back to not using the nvidia driver and 
select the xorg one.  I do know that I wasn't able to use both monitors 
with the xorg driver, but I'm willing to try that to isolate the problem.

Scott

Output from /proc/mounts:
rootfs / rootfs rw 0 0
none /sys sysfs rw 0 0
none /proc proc rw 0 0
udev /dev tmpfs rw 0 0
/dev/sda2 / ext3 rw,data=ordered 0 0
/dev/sda2 /dev/.static/dev ext3 rw,data=ordered 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid 0 0
usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
twin:/home /home nfs 
rw,vers=3,rsize=32768,wsize=32768,hard,intr,proto=tcp,timeo=600,retrans=2,sec=sys,addr=twin 
0 0
twin:/mp3 /mp3 nfs 
rw,vers=3,rsize=32768,wsize=32768,hard,intr,proto=tcp,timeo=600,retrans=2,sec=sys,addr=twin 
0 0


Trond Myklebust wrote:
> On Sat, 2007-10-13 at 15:48 -0700, Scott Petler wrote:
>   
>> Machine lockup with caps lock/num lock flashing or complete reboot/panic.
>>
>> I get various lockup issues with this kernel, (2.6.23 also similar 
>> problem).   I had problems getting e1000 lan module to work (it was fine 
>> in 2.6.21.5).  I disabled it and installed a different lan card that 
>> seems to work "better".
>>
>> Dual head machine 1GB RAM, nvidia driver x86-100.14.19
>>     
>
> Are you able to repeat this Oops _without_ the nvidia driver?
>
> Also, please provide the output from /proc/mounts
>
> Cheers
>   Trond
>
>
>   
>> Here is output of ver_linux:
>> ---------------------------------------------------------------------------------------------------------------------------------------------
>>
>> Linux zion 2.6.23-rc9 #3 Fri Oct 12 18:27:56 PDT 2007 i686 GNU/Linux
>>
>> Gnu C                  4.1.2
>> Gnu make               3.81
>> binutils               2.17
>> util-linux             2.12r
>> mount                  2.12r
>> module-init-tools      3.3-pre2
>> e2fsprogs              1.40-WIP
>> Linux C Library        3.6
>> Dynamic linker (ldd)   2.3.6
>> Procps                 3.2.7
>> Net-tools              1.60
>> Console-tools          0.2.3
>> Sh-utils               5.97
>> udev                   105
>> Modules Loaded         nfs lockd sunrpc nvidia i2c_core af_packet ipv6 
>> capability commoncap ppdev lp ac battery dm_mod e1000 loop snd_intel8x0 
>> snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer 
>> parport_pc button parport snd 8250_pnp 8250 serial_core soundcore shpchp 
>> pci_hotplug snd_page_alloc rng_core floppy intel_agp agpgart rtc sg 
>> evdev sr_mod usbhid sd_mod ata_piix 8139too ata_generic ehci_hcd 
>> uhci_hcd mii bitrev crc32 libata generic usbcore thermal processor fan 
>> unix ext3 jbd piix ide_disk ide_cd cdrom ide_scsi scsi_mod ide_core
>> ---------------------------------------------------------------------------------------------------------------------------------------------
>>
>> Here is output from syslog as it went down:
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: Oops: 0002 [#1]
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: CPU:    0
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: EIP:    0060:[<e1168fde>]    Tainted: P        VLI
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: EFLAGS: 00010206   (2.6.23-rc9 #3)
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: EIP is at 0xe1168fde
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: esi: f8f34700   edi: 00000000   ebp: 00000001   esp: e7cf3e00
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: ds: 007b   es: 007b   fs: 0000  gs: 0033  ss: 0068
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: Process firefox-bin (pid: 8397, ti=e7cf2000 task=f258ca90 
>> task.ti=e
>> 7cf2000)
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: Stack: f8f18eb7 c01367f6 e7cf3e48 000003e8 000003e8 
>> ed3e97c0 f1f6db
>> 9c f1f6db9c
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:        e7cf3f54 f8f60ec2 0004257b 00000000 00000000 
>> f1f037dc e7cf3f
>> 54 c01563d0
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:        019cc780 e7cf3eb0 c0155a63 dfff38c0 c014e001 
>> 019cc780 f1f037
>> dc dfe0ecf4
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel: Call Trace:
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<f8f18eb7>] rpcauth_lookupcred+0x63/0x87 [sunrpc]
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c01367f6>] pagevec_lookup+0x1c/0x22
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<f8f60ec2>] nfs_permission+0xab/0x183 [nfs]
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c01563d0>] __d_lookup+0x8b/0xbf
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c0155a63>] dput+0x15/0xcb
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<f8f60e17>] nfs_permission+0x0/0x183 [nfs]
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c014f648>] __link_path_walk+0x11c/0xa79
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c0102ff8>] setup_sigcontext+0x104/0x187
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c014ffe7>] link_path_walk+0x42/0xaf
>> Read from remote host 192.168.1.175: Connection reset by peer
>> Connection to 192.168.1.175 closed.
>>
>> Message from syslogd@zion at Sat Oct 13 15:22:34 2007 ...
>> zion kernel:  [<c014de5a>] permission+0x9e/0xdb
>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------
>> /proc/cpuinfo
>>
>> processor       : 0
>> vendor_id       : GenuineIntel
>> cpu family      : 15
>> model           : 2
>> model name      : Intel(R) Pentium(R) 4 CPU 2.40GHz
>> stepping        : 7
>> cpu MHz         : 2411.749
>> cache size      : 512 KB
>> fdiv_bug        : no
>> hlt_bug         : no
>> f00f_bug        : no
>> coma_bug        : no
>> fpu             : yes
>> fpu_exception   : yes
>> cpuid level     : 2
>> wp              : yes
>> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge 
>> mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs 
>> bts sync_rdtsc cid xtpr
>> bogomips        : 4826.95
>> clflush size    : 64
>>
>> ----------------------------------------------------------------------------------------------------------------------------------------------------
>> /proc/modules
>>
>> nfs 120816 1 - Live 0xf8f3a000
>> lockd 59656 2 nfs, Live 0xf8d7a000
>> sunrpc 154524 6 nfs,lockd, Live 0xf8f13000
>> nvidia 6212112 24 - Live 0xf9448000 (P)
>> i2c_core 23312 1 nvidia, Live 0xf8d4a000
>> af_packet 20104 2 - Live 0xf8d51000
>> ipv6 222052 10 - Live 0xf8d8b000
>> capability 5000 0 - Live 0xf8d39000
>> commoncap 7296 1 capability, Live 0xf886a000
>> ppdev 8964 0 - Live 0xf8d35000
>> lp 11204 0 - Live 0xf8d31000
>> ac 5764 0 - Live 0xf89fa000
>> battery 12424 0 - Live 0xf89ff000
>> dm_mod 49728 0 - Live 0xf8d3c000
>> e1000 111424 0 - Live 0xf8a2c000
>> loop 16772 0 - Live 0xf89ee000
>> snd_intel8x0 31260 0 - Live 0xf8a05000
>> snd_ac97_codec 90784 1 snd_intel8x0, Live 0xf8a4a000
>> ac97_bus 2432 1 snd_ac97_codec, Live 0xf88ce000
>> snd_pcm_oss 38560 0 - Live 0xf8a21000
>> snd_mixer_oss 15360 1 snd_pcm_oss, Live 0xf89a5000
>> snd_pcm 68872 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss, Live 0xf8a0f000
>> snd_timer 19972 1 snd_pcm, Live 0xf89f4000
>> parport_pc 33572 1 - Live 0xf89ca000
>> button 8464 0 - Live 0xf89c6000
>> parport 33096 3 ppdev,lp,parport_pc, Live 0xf89e2000
>> snd 46820 6 
>> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer, 
>> Live 0xf89d5000
>> 8250_pnp 9728 0 - Live 0xf89aa000
>> 8250 21748 1 8250_pnp, Live 0xf89bf000
>> serial_core 19072 1 8250, Live 0xf89b9000
>> soundcore 7392 1 snd, Live 0xf895d000
>> shpchp 30996 0 - Live 0xf89b0000
>> pci_hotplug 13960 1 shpchp, Live 0xf8963000
>> snd_page_alloc 10248 2 snd_intel8x0,snd_pcm, Live 0xf89a1000
>> rng_core 5252 0 - Live 0xf8960000
>> floppy 51876 0 - Live 0xf8971000
>> intel_agp 23572 1 - Live 0xf894d000
>> agpgart 31152 2 nvidia,intel_agp, Live 0xf8968000
>> rtc 11800 0 - Live 0xf8949000
>> sg 31644 0 - Live 0xf8954000
>> evdev 9600 1 - Live 0xf890b000
>> sr_mod 15140 0 - Live 0xf8906000
>> usbhid 26496 0 - Live 0xf8941000
>> sd_mod 26000 3 - Live 0xf8939000
>> ata_piix 17028 2 - Live 0xf8933000
>> 8139too 23552 0 - Live 0xf892c000
>> ata_generic 7812 0 - Live 0xf881b000
>> ehci_hcd 27916 0 - Live 0xf88f1000
>> uhci_hcd 21900 0 - Live 0xf88f9000
>> mii 5504 1 8139too, Live 0xf88ee000
>> bitrev 2176 1 8139too, Live 0xf88cc000
>> crc32 4224 1 8139too, Live 0xf886d000
>> libata 111796 2 ata_piix,ata_generic, Live 0xf890f000
>> generic 4996 0 [permanent], Live 0xf8867000
>> usbcore 122264 4 usbhid,ehci_hcd,uhci_hcd, Live 0xf88ad000
>> thermal 15644 0 - Live 0xf8878000
>> processor 21152 1 thermal, Live 0xf8830000
>> fan 5252 0 - Live 0xf881e000
>> unix 24880 654 - Live 0xf8870000
>> ext3 118024 1 - Live 0xf88d0000
>> jbd 49960 1 ext3, Live 0xf889f000
>> piix 8836 0 [permanent], Live 0xf882c000
>> ide_disk 16000 0 - Live 0xf8827000
>> ide_cd 36000 0 - Live 0xf885d000
>> cdrom 32800 2 sr_mod,ide_cd, Live 0xf8853000
>> ide_scsi 16392 0 - Live 0xf8821000
>> scsi_mod 132360 5 sg,sr_mod,sd_mod,libata,ide_scsi, Live 0xf887d000
>> ide_core 106704 5 generic,piix,ide_disk,ide_cd,ide_scsi, Live 0xf8837000
>>
>> ------------------------------------------------------------------------------------------------------------------------------------------------
>> /proc/ioports
>> 0000-001f : dma1
>> 0020-0021 : pic1
>> 0040-0043 : timer0
>> 0050-0053 : timer1
>> 0060-006f : keyboard
>> 0070-0077 : rtc
>> 0080-008f : dma page reg
>> 00a0-00a1 : pic2
>> 00c0-00df : dma2
>> 00f0-00ff : fpu
>> 0170-0177 : 0000:00:1f.2
>>   0170-0177 : libata
>> 01f0-01f7 : 0000:00:1f.2
>>   01f0-01f7 : libata
>> 02f8-02ff : serial
>> 0376-0376 : 0000:00:1f.2
>>   0376-0376 : libata
>> 0378-037a : parport0
>> 03c0-03df : vga+
>> 03f2-03f5 : floppy
>> 03f6-03f6 : 0000:00:1f.2
>>   03f6-03f6 : libata
>> 03f7-03f7 : floppy DIR
>> 03f8-03ff : serial
>> 0cf8-0cff : PCI conf1
>> 1000-107f : 0000:00:1f.0
>>   1000-1003 : ACPI PM1a_EVT_BLK
>>   1004-1005 : ACPI PM1a_CNT_BLK
>>   1008-100b : ACPI PM_TMR
>>   1028-102f : ACPI GPE0_BLK
>> 1080-10bf : 0000:00:1f.0
>> 1400-141f : 0000:00:1f.3
>> a000-afff : PCI Bus #02
>>   a000-a0ff : 0000:02:01.0
>>     a000-a0ff : 8139too
>> b000-b01f : 0000:00:1d.1
>>   b000-b01f : uhci_hcd
>> b400-b41f : 0000:00:1d.2
>>   b400-b41f : uhci_hcd
>> b800-b81f : 0000:00:1d.3
>>   b800-b81f : uhci_hcd
>> bc00-bc1f : 0000:00:1d.0
>>   bc00-bc1f : uhci_hcd
>> d800-d8ff : 0000:00:1f.5
>>   d800-d8ff : Intel ICH5
>> dc00-dc3f : 0000:00:1f.5
>>   dc00-dc3f : Intel ICH5
>> f000-f00f : 0000:00:1f.2
>>   f000-f00f : libata
>> -----------------------------------------------------------------------------------------------------------------------------------------------
>> /proc/iomem
>>
>> 00000000-0009f7ff : System RAM
>> 0009f800-0009ffff : reserved
>> 000a0000-000bffff : Video RAM area
>> 000c0000-000c7fff : Video ROM
>> 000d0000-000d7fff : pnp 00:00
>> 000f0000-000fffff : System ROM
>> 00100000-3ffeffff : System RAM
>>   00100000-00287ed7 : Kernel code
>>   00287ed8-003224df : Kernel data
>> 3fff0000-3fff2fff : ACPI Non-volatile Storage
>> 3fff3000-3fffffff : ACPI Tables
>> d0000000-dfffffff : PCI Bus #01
>>   d0000000-dfffffff : 0000:01:00.0
>> e0000000-e7ffffff : 0000:00:00.0
>> e8000000-ebffffff : PCI Bus #02
>>   e8000000-ebffffff : 0000:02:04.0
>> ec000000-eeffffff : PCI Bus #01
>>   ec000000-ecffffff : 0000:01:00.0
>>     ec000000-ecffffff : nvidia
>>   ed000000-edffffff : 0000:01:00.0
>>   ee000000-ee01ffff : 0000:01:00.0
>> ef000000-ef0fffff : PCI Bus #02
>>   ef000000-ef0000ff : 0000:02:01.0
>>     ef000000-ef0000ff : 8139too
>> ef100000-ef1003ff : 0000:00:1d.7
>>   ef100000-ef1003ff : ehci_hcd
>> ef101000-ef1011ff : 0000:00:1f.5
>>   ef101000-ef1011ff : Intel ICH5
>> ef102000-ef1020ff : 0000:00:1f.5
>>   ef102000-ef1020ff : Intel ICH5
>> fec00000-ffffffff : reserved
>> ~
>> ----------------------------------------------------------------------------------------------------------------------------------------------
>> lspci -vvv
>>
>> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM 
>> Controller/Host-Hub Interface (rev 02)
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR+ FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort+ >SERR- <PERR-
>>         Latency: 0
>>         Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>>         Capabilities: [e4] Vendor Specific Information
>>         Capabilities: [a0] AGP version 3.0
>>                 Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- 
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>>                 Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- 
>> Rate=x8
>>
>> 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller 
>> (rev 02) (prog-if 00 [Normal decode])
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 64
>>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>>         I/O behind bridge: 0000f000-00000fff
>>         Memory behind bridge: ec000000-eeffffff
>>         Prefetchable memory behind bridge: d0000000-dfffffff
>>         Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort+ <SERR- <PERR-
>>         BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>>
>> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
>> UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>>         Subsystem: Giga-byte Technology GA-8IPE1000/8KNXP motherboard
>>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin A routed to IRQ 16
>>         Region 4: I/O ports at bc00 [size=32]
>>
>> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
>> UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin B routed to IRQ 17
>>         Region 4: I/O ports at b000 [size=32]
>>
>> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
>> UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin C routed to IRQ 18
>>         Region 4: I/O ports at b400 [size=32]
>>
>> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
>> UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin A routed to IRQ 16
>>         Region 4: I/O ports at b800 [size=32]
>> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 
>> EHCI Controller (rev 02) (prog-if 20 [EHCI])
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin D routed to IRQ 19
>>         Region 0: Memory at ef100000 (32-bit, non-prefetchable) [size=1K]
>>         Capabilities: [50] Power Management version 2
>>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 
>> 00 [Normal decode])
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>>         I/O behind bridge: 0000a000-0000afff
>>         Memory behind bridge: ef000000-ef0fffff
>>         Prefetchable memory behind bridge: e8000000-ebffffff
>>         Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- <SERR- <PERR-
>>         BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>>
>> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC 
>> Interface Bridge (rev 02)
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>
>> 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller 
>> (rev 02) (prog-if 8a [Master SecP PriP])
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin A routed to IRQ 18
>>         Region 0: I/O ports at 01f0 [size=8]
>>         Region 1: I/O ports at 03f4 [size=1]
>>         Region 2: I/O ports at 0170 [size=8]
>>         Region 3: I/O ports at 0374 [size=1]
>>         Region 4: I/O ports at f000 [size=16]
>>
>> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus 
>> Controller (rev 02)
>>         Subsystem: Giga-byte Technology GA-8IPE1000 Pro2 motherboard (865PE)
>>         Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Interrupt: pin B routed to IRQ 9
>>         Region 4: I/O ports at 1400 [size=32]
>>
>> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER 
>> (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
>>         Subsystem: Giga-byte Technology GA-8IPE1000/8KNXP motherboard
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 0
>>         Interrupt: pin B routed to IRQ 21
>>         Region 0: I/O ports at d800 [size=256]
>>         Region 1: I/O ports at dc00 [size=64]
>>         Region 2: Memory at ef101000 (32-bit, non-prefetchable) [size=512]
>>         Region 3: Memory at ef102000 (32-bit, non-prefetchable) [size=256]
>>         Capabilities: [50] Power Management version 2
>>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>> 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 
>> 6600/GeForce 6600 GT] (rev a2) (prog-if 00 [VGA])
>>         Subsystem: XFX Pine Group Inc. GeForce 6600 GT AGP 128MB DDR3 
>> DUAL DVI TV
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 248 (1250ns min, 250ns max)
>>         Interrupt: pin A routed to IRQ 16
>>         Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
>>         Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>>         Region 2: Memory at ed000000 (32-bit, non-prefetchable) [size=16M]
>>         [virtual] Expansion ROM at ee000000 [disabled] [size=128K]
>>         Capabilities: [60] Power Management version 2
>>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>         Capabilities: [44] AGP version 3.0
>>                 Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- 
>> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>>                 Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- 
>> FW- Rate=x8
>>
>> 02:01.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
>>         Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet Adapter
>>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 64 (8000ns min, 16000ns max)
>>         Interrupt: pin A routed to IRQ 20
>>         Region 0: I/O ports at a000 [size=256]
>>         Region 1: Memory at ef000000 (32-bit, non-prefetchable) [size=256]
>>         Capabilities: [50] Power Management version 2
>>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
>> PME(D0-,D1+,D2+,D3hot+,D3cold+)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> 02:04.0 Multimedia video controller: Internext Compression Inc iTVC16 
>> (CX23416) MPEG-2 Encoder (rev 01)
>>         Subsystem: Hauppauge computer works Inc. WinTV PVR 150
>>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
>> ParErr- Stepping- SERR- FastB2B-
>>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
>> <TAbort- <MAbort- >SERR- <PERR-
>>         Latency: 32 (32000ns min, 2000ns max), Cache Line Size: 32 bytes
>>         Interrupt: pin A routed to IRQ 11
>>         Region 0: Memory at e8000000 (32-bit, prefetchable) [size=64M]
>>         Capabilities: [44] Power Management version 2
>>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>>
>> --------------------------------------------------------------------------------------------------------------------------------------------
>> /proc/scsi/scsi
>>
>> Attached devices:
>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>>   Vendor: ATA      Model: HDS722516VLSA80  Rev: V34O
>>   Type:   Direct-Access                    ANSI  SCSI revision: 05
>> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>>   Vendor: SONY     Model: CD-ROM CDU5211   Rev: YYS7
>>   Type:   CD-ROM                           ANSI  SCSI revision: 05
>>
>>
>>
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at  http://www.tux.org/lkml/
>>     
>
>
>   

  reply	other threads:[~2007-10-14 20:44 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-13 22:48 PROBLEM: kernel panic Scott Petler
2007-10-14 20:24 ` Trond Myklebust
2007-10-14 20:44   ` Scott Petler [this message]
2007-10-14 20:51     ` Doug Whitesell (LKML)
2007-10-14 21:00       ` Scott Petler
2007-10-14 21:32         ` Trond Myklebust
2007-10-14 21:36           ` Scott Petler
  -- strict thread matches above, loose matches on Subject: below --
2008-07-02  6:49 PROBLEM: Kernel panic Svein Larsen
2008-07-02  8:26 ` Frederik Deweerdt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47127FA8.6040506@sonic.net \
    --to=scottp@sonic.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trond.myklebust@fys.uio.no \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.