All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chuck Ebbert <cebbert@redhat.com>
To: Zhao Yakui <yakui.zhao@intel.com>
Cc: Linux-acpi@vger.kernel.org, lenb@kernel.org,
	Andi Kleen <ak@suse.de>, Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [RFC] [PATCH] ACPI :Modify timer override connection in Some NVIDIA systems
Date: Mon, 15 Oct 2007 12:30:13 -0400	[thread overview]
Message-ID: <47139595.2040505@redhat.com> (raw)
In-Reply-To: <1192172655.27194.29.camel@yakui_zhao.sh.intel.com>

On 10/12/2007 03:04 AM, Zhao Yakui wrote:
> Hi, All
>     The BIOS of some systems using NVIDIA chipset gives the uncorrect
> timer override connection, which will cause that I/O APIC and timer
> can't be connected and kernel panic.
>     There are two ways to fix this bug. One is to use the following patch and 
> the other is to add a new boot option of acpi_force_timer_override. 
> 
> 1. Use the following patch.
> The basic flowchart of patch is that:(unnecessary to add new boot option)
>     a. When NVIDIA chipset is detected and hpet timer exist, 
> acpi_use_timer_override will be set.
>     (Skip this when boot option of acpi_use_timer_override is given).
>     b. Check whether uncorrect timer connection(IRQ0, Pin0) exists when 
> acpi_use_timer_override is set and HPET timer exists. 
>       If error exists, timer will be forced to route to the Pin2.
> 
> 2. Add a new boot option of acpi_force_timer_override
>     The basic flowchart of this method is that:
>     a. When NVIDIA chipset is detected and HPET timer exists, 
> acpi_force_timer_override will be set.
>        (skip this when boot option of acpi_force_timer_override is given)
>     b. Check whether uncorrect timer connection(IRQ0,Pin0) exists when 
> acpi_force_timer_override is set.
>        If the error exists, modify the timer override connection.
> 
> Welcome the comments.
> Thanks.
> 
> Subject: ACPI :Modify timer override connection in Some NVIDIA systems
>>From : Zhao Yakui <yakui.zhao@intel.com>
> 
> BIOS defines the uncorrect timeroverride connection in some NVIDIA
> systems
> on which HPET timer exists. When the uncorrect connection is deteced, 
> the timer will be forced to route to the Pin 2 of I/O APIC instead of
> Pin 0.
> 
> http://bugzilla.kernel.org/show_bug.cgi?id=8956
> 
> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
> ---
>  arch/i386/kernel/acpi/boot.c       |   17 +++++++++++++++++
>  arch/i386/kernel/acpi/earlyquirk.c |    7 ++++++-
>  arch/x86_64/kernel/early-quirks.c  |    2 ++
>  3 files changed, 25 insertions(+), 1 deletion(-)
> 
> Index: linux-2.6.23-rc9/arch/i386/kernel/acpi/boot.c
> ===================================================================
> --- linux-2.6.23-rc9.orig/arch/i386/kernel/acpi/boot.c
> +++ linux-2.6.23-rc9/arch/i386/kernel/acpi/boot.c
> @@ -351,6 +351,11 @@ static void __init acpi_sci_ioapic_setup
>  	return;
>  }
>  
> +static int __init acpi_hpet_check(struct acpi_table_header *header)
> +{
> +	return 0;
> +}
> +
>  static int __init
>  acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
>  		       const unsigned long end)
> @@ -371,6 +376,18 @@ acpi_parse_int_src_ovr(struct acpi_subta
>  		return 0;
>  	}
>  
> +	if (acpi_use_timer_override &&
> +	   intsrc->source_irq == 0 && intsrc->global_irq == 0 &&
> +	   !acpi_table_parse(ACPI_SIG_HPET, acpi_hpet_check)) {
> +		mp_override_legacy_irq(intsrc->source_irq,
> +			intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
> +			(intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
> +			2);
> +		printk(PREFIX "BIOS IRQ0 pin0 override ignored."
> +				"Force to use IRQ0 pin2 \n");
> +		return 0;
> +	}
> +
>  	if (acpi_skip_timer_override &&
>  	    intsrc->source_irq == 0 && intsrc->global_irq == 2) {
>  		printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
> Index: linux-2.6.23-rc9/arch/i386/kernel/acpi/earlyquirk.c
> ===================================================================
> --- linux-2.6.23-rc9.orig/arch/i386/kernel/acpi/earlyquirk.c
> +++ linux-2.6.23-rc9/arch/i386/kernel/acpi/earlyquirk.c
> @@ -26,7 +26,8 @@ static int __init check_bridge(int vendo
>  	/* According to Nvidia all timer overrides are bogus unless HPET
>  	   is enabled. */
>  	if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
> -		if (!warned && acpi_table_parse(ACPI_SIG_HPET,
> +		if (!warned) {
> +		if (acpi_table_parse(ACPI_SIG_HPET,
>  						nvidia_hpet_check)) {
>  			warned = 1;
>  			acpi_skip_timer_override = 1;
> @@ -36,6 +37,10 @@ static int __init check_bridge(int vendo
>                  printk(KERN_INFO "If you got timer trouble "
>  			 	 "try acpi_use_timer_override\n");
>  
> +			} else {
> +			warned = 1;
> +			acpi_use_timer_override = 1;
> +			}
>  		}
>  	}
>  #endif
> Index: linux-2.6.23-rc9/arch/x86_64/kernel/early-quirks.c
> ===================================================================
> --- linux-2.6.23-rc9.orig/arch/x86_64/kernel/early-quirks.c
> +++ linux-2.6.23-rc9/arch/x86_64/kernel/early-quirks.c
> @@ -57,6 +57,8 @@ static void __init nvidia_bugs(void)
>  		       "timer override.\n");
>  		printk(KERN_INFO "If you got timer trouble "
>  			"try acpi_use_timer_override\n");
> +	} else {
> +		acpi_use_timer_override = 1;
>  	}
>  #endif
>  	/* RED-PEN skip them on mptables too? */

cc: added

  reply	other threads:[~2007-10-15 16:30 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-12  7:04 [RFC] [PATCH] ACPI :Modify timer override connection in Some NVIDIA systems Zhao Yakui
2007-10-15 16:30 ` Chuck Ebbert [this message]
2007-10-15 16:32   ` Andi Kleen
2007-10-16 21:07     ` Chuck Ebbert
2007-10-16 21:51       ` Andi Kleen
2007-10-16 21:57         ` Chuck Ebbert
2007-10-16 22:17           ` Andi Kleen
2007-10-17  9:00         ` Zhao Yakui
2007-10-17  9:58           ` Andi Kleen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47139595.2040505@redhat.com \
    --to=cebbert@redhat.com \
    --cc=Linux-acpi@vger.kernel.org \
    --cc=ak@suse.de \
    --cc=lenb@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=yakui.zhao@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.