Kristen Carlson Accardi wrote:
>
> Hi Mark,
> So, just to make sure I understand, your reproducer for the failing case is:
> 1.  Boot laptop with no card.
> 2.  Load pciehp

Note that at this point I can insert/remove cards and they work fine.
If I suspend with card inserted, then lspci still shows the card on resume
but pciehp no longer functions (doesn't notice insert/removal events).

> 3.  Suspend laptop (slot is still empty)
> 4.  Resume laptop (slot is still empty)
> 5.  insert card - card is not detected.

Correct.  Then rmmod pciehp; modprobe pciehp;  and it works again.

Another thing:  if a card is already in the slot before pciehp is loaded
(under any circumstances), then pciehp does *not* see the card until I
unplug/replug it.

I also checked my modprobe.d/ options, and I am using pciehp_force=1.
Without that flag, none of this ever works.

> Can you tell me which Dell laptop you have, and also send me the dmesg
> output of the failing case after loading pciehp with pciehp_debug=1.

I'm attaching a syslog capture (if you just want the kernel stuff,
then just do:  grep 'kernel|logger' syslog.txt

Also attached is a full  lspci -vv  for this machine,
which happens to be a Dell Inspiron 9400 with 2.1GHz Core2Duo
and 2GB of RAM.

Cheers