From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [209.85.146.182] (helo=wa-out-1112.google.com) by linuxtogo.org with esmtp (Exim 4.67) (envelope-from ) id 1IiISt-0007GD-B1 for openembedded-devel@openembedded.org; Thu, 18 Oct 2007 01:38:23 +0200 Received: by wa-out-1112.google.com with SMTP id v27so3134873wah for ; Wed, 17 Oct 2007 16:31:33 -0700 (PDT) Received: by 10.114.197.1 with SMTP id u1mr9258533waf.1192589568258; Tue, 16 Oct 2007 19:52:48 -0700 (PDT) Received: from ?192.168.1.3? ( [123.116.97.152]) by mx.google.com with ESMTPS id m6sm8026038wag.2007.10.16.19.52.45 (version=TLSv1/SSLv3 cipher=RC4-MD5); Tue, 16 Oct 2007 19:52:47 -0700 (PDT) Message-ID: <471578FA.2020105@gmail.com> Date: Wed, 17 Oct 2007 10:52:42 +0800 From: DAMWID User-Agent: Thunderbird 1.5.0.13 (X11/20070824) MIME-Version: 1.0 To: openembedded-devel@openembedded.org Subject: gmp-native do_configure failed X-BeenThere: openembedded-devel@lists.openembedded.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: openembedded-devel@lists.openembedded.org List-Id: Using the OpenEmbedded metadata to build Distributions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 17 Oct 2007 23:38:23 -0000 Content-Type: multipart/mixed; boundary="------------040408050100030209070002" --------------040408050100030209070002 Content-Type: text/plain; charset=GB18030; format=flowed Content-Transfer-Encoding: 7bit Hi all, Today I tried to build a angstrom minimal-image for my pxa27x board, but the build failed when configure gmp-native, the following is the error log: NOTE: package gmp-native-4.2.1: started NOTE: package gmp-native-4.2.1-r2: task do_patch: started NOTE: Applying patch 'configure.patch' NOTE: Applying patch 'amd64.patch' NOTE: Applying patch 'sh4-asmfix.patch' NOTE: Applying patch 'x86-fat.diff' NOTE: package gmp-native-4.2.1-r2: task do_patch: completed NOTE: package gmp-native-4.2.1: completed NOTE: Running task 108 of 654 (ID: 300, /work/openembedded/org.openembedded.dev/packages/gmp/gmp-native_4.2.1.bb, do_configure) NOTE: package gmp-native-4.2.1: started NOTE: package gmp-native-4.2.1-r2: task do_configure: started ERROR: function do_configure failed ERROR: log data follows (/work/openembedded/build_pxa27x/tmp/work/i686-xscale-linux/gmp-native-4.2.1-r2/temp/log.do_configure.17599) | automake (GNU automake) 1.9.3 | Written by Tom Tromey . | | Copyright 2004 Free Software Foundation, Inc. | This is free software; see the source for copying conditions. There is NO | warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. | AUTOV is 1.9 | NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint -I /opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal-1.9 -I /opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal | autoreconf: Entering directory `.' | autoreconf: configure.in: not using Gettext | autoreconf: running: aclocal -I /opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal-1.9 -I /opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal --force | autoreconf: configure.in: tracing | autoreconf: running: libtoolize --copy --force | Using `AC_PROG_RANLIB' is rendered obsolete by `AC_PROG_LIBTOOL' | autoreconf: running: /opt/arm-xscale-linux-gnueabi/i686-linux/bin/autoconf --include=/opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal-1.9 --include=/opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal --force --warnings=cross | autoreconf: running: /opt/arm-xscale-linux-gnueabi/i686-linux/bin/autoheader --include=/opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal-1.9 --include=/opt/arm-xscale-linux-gnueabi/i686-linux/share/aclocal --force --warnings=cross | autoreconf: running: automake --foreign --add-missing --copy --force-missing --warnings=cross | automake: unknown warning category `cross' | autoreconf: running: gnu-configize | autoreconf: Leaving directory `.' | NOTE: Running /work/openembedded/build_pxa27x/tmp/work/i686-xscale-linux/gmp-native-4.2.1-r2/gmp-4.2.1/configure --build=i686-linux --host=i686-linux --target=i686-xscale-linux --prefix=/opt/arm-xscale-linux-gnueabi --exec_prefix=/opt/arm-xscale-linux-gnueabi/i686-linux --bindir=/opt/arm-xscale-linux-gnueabi/i686-linux/bin --sbindir=/opt/arm-xscale-linux-gnueabi/i686-linux/bin --libexecdir=/opt/arm-xscale-linux-gnueabi/i686-linux/libexec --datadir=/opt/arm-xscale-linux-gnueabi/i686-linux/share --sysconfdir=/opt/arm-xscale-linux-gnueabi/etc --sharedstatedir=/opt/arm-xscale-linux-gnueabi/com --localstatedir=/opt/arm-xscale-linux-gnueabi/var --libdir=/opt/arm-xscale-linux-gnueabi/i686-linux/lib --includedir=/opt/arm-xscale-linux-gnueabi/i686-linux/include --oldincludedir=/opt/arm-xscale-linux-gnueabi/i686-linux/include --infodir=/opt/arm-xscale-linux-gnueabi/i686-linux/share/info --mandir=/opt/arm-xscale-linux-gnueabi/i686-linux/share/man ... | configure: error: --target is not appropriate for GMP | Use --build=CPU-VENDOR-OS if you need to specify your CPU and/or system | explicitly. Use --host if cross-compiling (see "Installing GMP" in the | manual for more on this). | FATAL: oe_runconf failed NOTE: Task failed: /work/openembedded/build_pxa27x/tmp/work/i686-xscale-linux/gmp-native-4.2.1-r2/temp/log.do_configure.17599 NOTE: package gmp-native-4.2.1-r2: task do_configure: failed ERROR: TaskFailed event exception, aborting NOTE: package gmp-native-4.2.1: failed ERROR: Build of /work/openembedded/org.openembedded.dev/packages/gmp/gmp-native_4.2.1.bb do_configure failed ERROR: Task 300 (/work/openembedded/org.openembedded.dev/packages/gmp/gmp-native_4.2.1.bb, do_configure) failed NOTE: Tasks Summary: Attempted 107 tasks of which 0 didn't need to be rerun and 1 failed. ERROR: '/work/openembedded/org.openembedded.dev/packages/gmp/gmp-native_4.2.1.bb' failed I googled this problem and found this is a bug already be fixed years ago. Maybe this is a problem of my build environment, my host distro is ubuntu-7.04, with gcc-4.1 and gcc-3.4 installed, the default is gcc-4.1, all other development related packages(autoconf, automake, libtool, etc.) have been installed with the lastest version. But I successfully built angstrom-*-image in this environment before with the same attached local.conf. Anyone can help me? Thanks, Damwid # # OpenEmbedded local configuration file (sample) # # Please visit the Wiki at http://openembedded.org/ for more info. # # # Be SURE to read this file in its entirety and the GettingStarted page on the # wiki before proceeding. # # Once you have done that, remove the line at the end of this # file and build away. # # WARNING: lines starting with a space (' ') will result in parse failures. # Remove '# ' from commented lines to activate them. # # NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you # must have paths relative to your homedir use ${HOME} (note the {}'s there # you MUST have them for the variable expansion to be done by BitBake). Your # paths should all be absolute paths (They should all start with a / after # expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok). # Use this to specify where BitBake should place the downloaded sources into DL_DIR = "${HOME}/sources" CROSS_DIR = "/opt/arm-xscale-linux-gnueabi" STAGING_DIR = "/opt/arm-xscale-linux-gnueabi" # Delete the line below. Then specify which .bb files to consider for # your build. Typically this will be something like BBFILES = "/path/to/openembedded/packages/*/*.bb" BBFILES := "/work/openembedded/org.openembedded.dev/packages/*/*.bb /work/openembedded/build_pxa27x/packages/*/*.bb" # Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files # This is a regulary expression, so be sure to get your parenthesis balanced. BBMASK = "" # Uncomment this if you want to use a prebuilt toolchain. You will need to # provide packages for toolchain and additional libraries yourself. You also # have to set PATH in your environment to make sure BitBake finds additional binaries. # Note: You will definitely need to say: # ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95" # to build any of two Linux 2.4 Embedix kernels, # i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18 - and don't forget # to rename the binaries as instructed in the Wiki. # ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" # Select between multiple alternative providers, if more than one is eligible. # PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie" # PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-qpe" # PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" # PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" # PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" # Uncomment this to specify where BitBake should create its temporary files. # Note that a full build of everything in OpenEmbedded will take GigaBytes of hard # disk space, so make sure to free enough space. The default TMPDIR is # /tmp # Don't use symlinks in in the path to avoid problems # TMPDIR = /usr/local/projects/oetmp # Uncomment this to specify a machine to build for. See the conf directory # for machines currently known to OpenEmbedded. #MACHINE = "mainstone" MACHINE = "spitz" # Use this to specify the target architecture. Note that this is only # needed when building for a machine not known to OpenEmbedded. Better use # the MACHINE attribute (see above) # TARGET_ARCH = "arm" # Use this to specify the target operating system. The default is "linux", # for a normal linux system with glibc. Set this to "linux-uclibc" if you want # to build a uclibc based system. # TARGET_OS = "linux" # TARGET_OS = "linux-uclibc" # TARGET_OS = "linux-gnueabi" # Uncomment this to select a distribution policy. See the conf directory # for distributions currently known to OpenEmbedded. # Although they no longer contain version number in the (file-)name # familiar-unstable and openzaurus-unstable are so called "versioned" # distros, i.e. they explicitely select specific versions of various # packages. # Stay away from unversioned distros unless you really know what you are doing # DISTRO = "openzaurus-unstable" DISTRO = "angstrom-2007.1" # So far, angstrom.conf and familiar.conf set ENABLE_BINARY_LOCALE_GENERATION # to generate binary locale packages at build time using qemu-native and # thereby guarantee i18n support on all devices. If your build breaks on # qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that # this breaks i18n on devices with less than 128MB RAM) or installing # a working third-party qemu (e.g. provided by your distribution) and # adding qemu-native to ASSUME_PROVIDED # ENABLE_BINARY_LOCALE_GENERATION = "0" # ASSUME_PROVIDED += "qemu-native" GLIBC_GENERATE_LOCALES = "en_US.UTF-8 zh_CN.UTF-8" # Uncomment this to select a particular major kernel version if the MACHINE setting # supports more than one major kernel version. Currently this is suported by the # following MACHINE types: poodle, tosa and simpad. # MACHINE_KERNEL_VERSION = "2.6" # Uncomment one of these to build packages during the build process. # This is done automatically if you set DISTRO (see above) # INHERIT = "package_ipk" # INHERIT = "package_tar" # Add the required image file system types below. Valid are jffs2, tar, cramfs and ext2 IMAGE_FSTYPES = "jffs2 cramfs tar.gz" # Uncomment this to disable the parse cache (not recommended). # CACHE = "" # Uncomment this if you want BitBake to emit debugging output # BBDEBUG = "yes" # Uncomment these two if you want BitBake to build images useful for debugging. # Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined # DEBUG_BUILD = "1" # INHIBIT_PACKAGE_STRIP = "1" # Uncomment these to build a package such that you can use gprof to profile it. # NOTE: This will only work with 'linux' targets, not # 'linux-uclibc', as uClibc doesn't provide the necessary # object files. Also, don't build glibc itself with these # flags, or it'll fail to build. # # PROFILE_OPTIMIZATION = "-pg" # SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" # LDFLAGS =+ "-pg" # Uncomment this to enable parallel make. # This allows make to spawn mutliple processes to take advantage of multiple # processors. Useful on SMP machines. This may break some packages - we're # in the process of marking these so let us know if you find any. # PARALLEL_MAKE = "-j 4" # Uncomment this if you want BitBake to emit the log if a build fails. BBINCLUDELOGS = "yes" # Specifies a location to search for pre-generated tarballs when fetching # a cvs:// URI. Outcomment this, if you always want to pull directly from CVS. # CVS_TARBALL_STASH = "http://www.oesources.org/source/current/" # EDIT THIS FILE and then remove the line below before using! # REMOVE_THIS_LINE:="${@oe.fatal('Read the comments in your conf/local.conf')}" # Some machine specific configure TARGET_VENDOR_spitz = "-xscale" ERASEBLOCKSIZE_spitz = "0x20000" EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=${ERASEBLOCKSIZE} --pad --faketime -n" IMAGE_CMD_jffs2 = "mkfs.jffs2 -x lzo --root=${IMAGE_ROOTFS} --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2.bin ${EXTRA_IMAGECMD}" ANGSTROM_EXTRA_INSTALL = "mplayer mencoder mtd-utils" --------------040408050100030209070002--