From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <47205400.9070804@domain.hid> Date: Thu, 25 Oct 2007 10:29:52 +0200 From: Philippe Gerum MIME-Version: 1.0 References: <472043C1.1040506@domain.hid> <47204948.7050109@domain.hid> In-Reply-To: <47204948.7050109@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] Problems building Xenomai 2.4-rc4 and linux 2.6.23 Reply-To: philippe.gerum@domain.hid List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Jan Kiszka Cc: xenomai@xenomai.org Jan Kiszka wrote: > Robert Gubler wrote: >> Well, sadly I don't have it with me. I can post it tomorrow, But, >> essentially the config is whatever the default is. I didn't change any >> options when I ran `make menuconfig`. > > OK, will retry your steps later, maybe it also triggers for me. > >> The other configurations I tried were: >> >> linux-2.6.23.1.tar.bz2 >> xenomai-2.4-rc4.tar.bz2 >> adeos-ipipe-2.6.23-i386-1.10-10.patch >> >> >> And, >> >> linux-2.6.23.1.tar.bz2 >> xenomai-2.3.4.tar.bz2 >> adeos-ipipe-2.6.23-i386-1.10-10.patch > > This combination will not work "by design" (2.3.x only supports kernels > up to 2.6.20). > Only Xenomai/x86 currently has this limitation, due to the introduction of the generic clock events layer. Other supported archs may still use more recent kernels along with v2.3.x, until this layer makes it into mainline for them too, that is. -- Philippe.