From: Alexey Starikovskiy <aystarik@gmail.com>
To: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [2.624-rc1 regression] lost battery information
Date: Fri, 26 Oct 2007 22:12:03 +0400 [thread overview]
Message-ID: <47222DF3.3040208@gmail.com> (raw)
In-Reply-To: <200710262120.22536.arvidjaar@mail.ru>
Andrey Borzenkov wrote:
> On Friday 26 October 2007, Alexey Starikovskiy wrote:
>> Andrey Borzenkov wrote:
>>> I have lost battery in 2.6.24-rc1. Without CONFIG_ACPI_PROCFS I have
>>> no /proc/acpi/battery and cannot test netlink interface because right now
>>> there is no consumer of this.
>> for /sysfs interface you need to enable power_supply driver.
>> or you could apply this patch and power_supply will be selected by battery
>> itself.
>>
>
> I already have power_supply module, battery depends on it and it is autloaded.
> But I fail to see where I can get battery info in /sys
Intent was to put into /sysfs same information:
aystarik@samsung:~/client_conf$ ls /sys/class/power_supply/BAT1/
alarm charge_full charge_full_design charge_now current_now device manufacturer model_name present status subsystem technology type uevent voltage_min_design voltage_now
aystarik@samsung:~/client_conf$ cat /sys/class/power_supply/BAT1/*
0
4172000
4300000
4172000
0
cat: /sys/class/power_supply/BAT1/device: Is a directory
Pacifi
Bat1
1
Full
cat: /sys/class/power_supply/BAT1/subsystem: Is a directory
Li-ion
Battery
PHYSDEVPATH=/devices/LNXSYSTM:00/device:00/PNP0C0A:00
PHYSDEVBUS=acpi
PHYSDEVDRIVER=battery
POWER_SUPPLY_NAME=BAT1
POWER_SUPPLY_TYPE=Battery
POWER_SUPPLY_STATUS=Full
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_VOLTAGE_MIN_DESIGN=14800000
POWER_SUPPLY_VOLTAGE_NOW=16522000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CHARGE_FULL_DESIGN=4300000
POWER_SUPPLY_CHARGE_FULL=4172000
POWER_SUPPLY_CHARGE_NOW=4172000
POWER_SUPPLY_MODEL_NAME=Bat1
POWER_SUPPLY_MANUFACTURER=Pacifi
14800000
16522000
aystarik@samsung:~/client_conf$ cat /proc/acpi/battery/BAT1/*
alarm: unsupported
present: yes
design capacity: 4300 mAh
last full capacity: 4172 mAh
battery technology: rechargeable
design voltage: 14800 mV
design capacity warning: 208 mAh
design capacity low: 41 mAh
capacity granularity 1: 41 mAh
capacity granularity 2: 41 mAh
model number: Bat1
serial number: 001
battery type: LION
OEM info: Pacifi
present: yes
capacity state: ok
charging state: charged
present rate: 0 mA
remaining capacity: 4172 mAh
present voltage: 16518 mV
next prev parent reply other threads:[~2007-10-26 18:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-26 16:24 [2.624-rc1 regression] lost battery information Andrey Borzenkov
2007-10-26 16:44 ` Frans Pop
2007-10-26 16:57 ` Alexey Starikovskiy
2007-10-26 17:20 ` Andrey Borzenkov
2007-10-26 18:00 ` Frans Pop
2007-10-26 18:12 ` Alexey Starikovskiy [this message]
2007-10-26 18:15 ` Andrey Borzenkov
2007-10-26 18:32 ` Alexey Starikovskiy
2007-10-26 20:57 ` Frans Pop
2007-10-26 21:07 ` Alexey Starikovskiy
2007-10-27 7:22 ` Andrey Borzenkov
2007-10-27 13:45 ` Alexey Starikovskiy
2007-10-27 14:55 ` Andrey Borzenkov
2007-10-27 15:20 ` Alexey Starikovskiy
2007-10-27 16:16 ` Frans Pop
2007-10-27 16:49 ` Andrey Borzenkov
2007-10-27 16:59 ` Alexey Starikovskiy
2007-10-26 21:05 ` ACPI: use select POWER_SUPPLY for AC, BATTERY and SBS (was: [2.624-rc1 regression] lost battery information) Matej Laitl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47222DF3.3040208@gmail.com \
--to=aystarik@gmail.com \
--cc=arvidjaar@mail.ru \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.