From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: RE : Re: No sound with intel hda driver on a sony vaio vgx xl100 system Date: Tue, 23 Jan 2007 23:46:42 +0100 (CET) Message-ID: <472402.83858.qm@web36808.mail.mud.yahoo.com> References: <1169503839.31789.100.camel@localhost> Reply-To: jmsgrtn-alsa@yahoo.com Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <1169503839.31789.100.camel@localhost> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@lists.sourceforge.net Errors-To: alsa-devel-bounces@lists.sourceforge.net To: Tobin Davis Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I have tried both model. none of them works. Is there anything I missed ? --- Tobin Davis a =E9crit : > Your subsystem ID (104d:81f7) is not listed in the driver currently. > The driver is configured to use the generic parser if it can't find a > match. > = > There are two defined models for your codec (vaio, vaio-ar). Try > loading the driver with one of those models as follows: > modprobe -r snd-hda-intel # remove driver > modprobe snd-hda-intel model=3Dvaio # reload with model deffinition > = > Try both model deffinitions to see which works better for you. Report > back your results and we'll get it added. > = > Thanks, > = > Tobin Davis > = > On Mon, 2007-01-22 at 22:22 +0100, jmsgrtn-alsa@yahoo.com wrote: > = > > Hi > > = > > I can't have any sound on my sony VAIO vgx-xl100 system with the 1.0.14= rc2 > > build on a 2.6.18 kernel (debian) > > = > > the output of lspci -nv is : > > = > > 00:1b.0 0403: 8086:27d8 (rev 01) > > Subsystem: 104d:81f7 > > Flags: bus master, fast devsel, latency 0, IRQ 169 > > Memory at fdff8000 (64-bit, non-prefetchable) [size=3D16K] > > Capabilities: > > = > > dmesg gives : > > = > > ACPI: PCI interrupt for device 0000:00:1b.0 disabled > > PCI: Enabling device 0000:00:1b.0 (0000 -> 0002) > > ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 > > PCI: Setting latency timer of device 0000:00:1b.0 to 64 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_in= tel.c:696: > > codec_mask =3D 0x1 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:611: > > AUD_IN =3D 6 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:233: > > UNMUTE IN: NID=3D0x6 IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:233: > > UNMUTE IN: NID=3D0xe IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:233: > > UNMUTE IN: NID=3D0x7 IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:217: > > UNMUTE OUT: NID=3D0x7 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:648: > > [Capture Source] NID=3D0x6, #SRC=3D1 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:651: > > [Line] IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:289: > > AUD_OUT found 2 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:233: > > UNMUTE IN: NID=3D0xa IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:217: > > UNMUTE OUT: NID=3D0xa > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:217: > > UNMUTE OUT: NID=3D0xa > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:251: > > CONNECT: NID=3D0x6 IDX=3D0x0 > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:713: > > [Master Playback Switch] NID=3D0x2, DIR=3DOUT > > ALSA > > > /home/jm/tmp/alsa-driver-1.0.14rc2/pci/hda/../../alsa-kernel/pci/hda/hda_ge= neric.c:733: > > [Master Playback Volume] NID=3D0x2, DIR=3DOUT > > = > > and the contents of /proc/asound/card0/codec# is : > > = > > Codec: SigmaTel CXD9872RD/K > > Address: 0 > > Vendor Id: 0x83847661 > > Subsystem Id: 0x104d0b00 > > Revision Id: 0x104201 > > Default PCM: > > rates [0x7e0]: 44100 48000 88200 96000 176400 192000 > > bits [0xe]: 16 20 24 > > formats [0x1]: PCM > > Default Amp-In caps: ofs=3D0x00, nsteps=3D0x0f, stepsize=3D0x05, mute= =3D1 > > Default Amp-Out caps: ofs=3D0x7f, nsteps=3D0x7f, stepsize=3D0x02, mute= =3D1 > > Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out > > Amp-Out caps: N/A > > Amp-Out vals: [0x3c 0x3c] > > Power: 0x0 > > Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out > > Amp-Out caps: N/A > > Amp-Out vals: [0xff 0xff] > > Power: 0x0 > > Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out > > Amp-Out caps: N/A > > Amp-Out vals: [0xff 0xff] > > Power: 0x0 > > Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out > > Amp-Out caps: N/A > > Amp-Out vals: [0x3c 0x3c] > > Power: 0x0 > > Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo > > Power: 0x0 > > Connection: 1 > > 0x07 > > Node 0x07 [Audio Selector] wcaps 0x300903: Stereo Amp-In > > Amp-In caps: N/A > > Amp-In vals: [0x00 0x00] > > Connection: 1 > > 0x0e > > Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo > > Power: 0x0 > > Connection: 1 > > 0x09 > > Node 0x09 [Audio Selector] wcaps 0x300903: Stereo Amp-In > > Amp-In caps: N/A > > Amp-In vals: [0x80 0x80] > > Connection: 1 > > 0x15 > > Node 0x0a [Pin Complex] wcaps 0x400181: Stereo > > Pincap 0x08173c: IN OUT HP Detect > > Pin Default 0x02024110: [Jack] Line Out at Ext Front > > Conn =3D 1/4, Color =3D Green > > Pin-ctls: 0xc0: OUT HP > > Connection: 1 > > 0x02 > > Node 0x0b [Pin Complex] wcaps 0x400181: Stereo > > Pincap 0x0814: OUT Detect > > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > > Conn =3D 1/8, Color =3D Black > > Pin-ctls: 0x00: > > Connection: 1 > > 0x04 > > Node 0x0c [Pin Complex] wcaps 0x400181: Stereo > > Pincap 0x0814: OUT Detect > > Pin Default 0x411111f0: [N/A] Speaker at Ext Rear > > Conn =3D 1/8, Color =3D Black > > Pin-ctls: 0x00: > > Connection: 1 > > 0x03 > > Node 0x0d [Pin Complex] wcaps 0x400181: Stereo > > Pincap 0x08173c: IN OUT HP Detect > > Pin Default 0x02a19920: [Jack] Mic at Ext Front > > Conn =3D 1/8, Color =3D Pink > > Pin-ctls: 0x24: IN > > Connection: 1 > > 0x02 > > Node 0x0e [Pin Complex] wcaps 0x400081: Stereo > > Pincap 0x0824: IN Detect > > Pin Default 0x01845121: [Jack] Line In at Ext Rear > > Conn =3D RCA, Color =3D Red > > Pin-ctls: 0x20: IN > > Node 0x0f [Pin Complex] wcaps 0x400181: Stereo > > Pincap 0x0814: OUT Detect > > Pin Default 0x01045111: [Jack] Line Out at Ext Rear > > Conn =3D RCA, Color =3D Red > > Pin-ctls: 0x40: OUT > > Connection: 1 > > 0x05 > > Node 0x10 [Audio Output] wcaps 0x40211: Stereo Digital > > PCM: > > rates [0x3e0]: 44100 48000 88200 96000 176400 > > bits [0xe]: 16 20 24 > > formats [0x5]: PCM AC3 > > Node 0x11 [Pin Complex] wcaps 0x400301: Stereo Digital > > Pincap 0x0810: OUT > > Pin Default 0x01451112: [Jack] SPDIF Out at Ext Rear > > Conn =3D Optical, Color =3D Black > > Pin-ctls: 0x00: > > Connection: 2 > > 0x10* 0x09 > > Node 0x12 [Audio Input] wcaps 0x140311: Stereo Digital > > PCM: > > rates [0x160]: 44100 48000 96000 > > bits [0xe]: 16 20 24 > = =3D=3D=3D message truncated =3D=3D=3D = = = ___________________________________________________________________________ = D=E9couvrez une nouvelle fa=E7on d'obtenir des r=E9ponses =E0 toutes vos qu= estions ! = Profitez des connaissances, des opinions et des exp=E9riences des internaut= es sur Yahoo! Questions/R=E9ponses = http://fr.answers.yahoo.com ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE= VDEV