[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: root=UUID=67dc635b-f5a5-4323-91d8-54372b392bb3 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee3000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F7100 checksum 0 [ 0.000000] ACPI: RSDP 000F7100, 0024 (r2 TOSCPL) [ 0.000000] ACPI: XSDT 3FED7A7D, 0094 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 3FEDFB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 3FED8E1A, 6CD2 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 3FEE2FC0, 0040 [ 0.000000] ACPI: APIC 3FEDFC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 3FEDFCBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 3FEDFCF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 3FEDFD30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TMOR 3FEDFD62, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: SLIC 3FEDFD88, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: OSFR 3FEDFEFE, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) [ 0.000000] ACPI: APIC 3FEDFF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 3FEDFFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SSDT 3FED8B6D, 02AD (r1 SataRe SataAhci 1000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FED809D, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FED7FF7, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624) [ 0.000000] ACPI: SSDT 3FED7B11, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fed0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 261840) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 261840 [ 0.000000] On node 0 totalpages: 261743 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1124 pages reserved [ 0.000000] DMA zone: 2819 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3523 pages used for memmap [ 0.000000] DMA32 zone: 254221 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 257040 [ 0.000000] Kernel command line: root=UUID=67dc635b-f5a5-4323-91d8-54372b392bb3 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 13.170229] time.c: Detected 2194.499 MHz processor. [ 13.171467] Console: colour VGA+ 80x25 [ 13.171484] Checking aperture... [ 13.171496] Calgary: detecting Calgary via BIOS EBDA area [ 13.171498] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 13.180543] Memory: 1020228k/1047360k available (2274k kernel code, 26744k reserved, 1181k data, 296k init) [ 13.180580] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 13.256541] Calibrating delay using timer specific routine.. 4393.37 BogoMIPS (lpj=8786755) [ 13.256569] Security Framework v1.0.0 initialized [ 13.256576] SELinux: Disabled at boot. [ 13.256659] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.257245] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 13.257528] Mount-cache hash table entries: 256 [ 13.257635] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.257637] CPU: L2 cache: 4096K [ 13.257639] CPU 0/0 -> Node 0 [ 13.257641] using mwait in idle threads. [ 13.257642] CPU: Physical Processor ID: 0 [ 13.257644] CPU: Processor Core ID: 0 [ 13.257648] CPU0: Thermal monitoring handled by SMI [ 13.257657] SMP alternatives: switching to UP code [ 13.257881] Early unpacking initramfs... done [ 13.550220] ACPI: Core revision 20070126 [ 13.550261] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.596683] Using local APIC timer interrupts. [ 13.642193] result 12468740 [ 13.642194] Detected 12.468 MHz APIC timer. [ 13.644066] SMP alternatives: switching to SMP code [ 13.644143] Booting processor 1/2 APIC 0x1 [ 13.654649] Initializing CPU#1 [ 13.731904] Calibrating delay using timer specific routine.. 4389.00 BogoMIPS (lpj=8778000) [ 13.731910] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.731911] CPU: L2 cache: 4096K [ 13.731913] CPU 1/1 -> Node 0 [ 13.731915] CPU: Physical Processor ID: 0 [ 13.731916] CPU: Processor Core ID: 1 [ 13.731921] CPU1: Thermal monitoring enabled (TM2) [ 13.732373] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b [ 13.735911] Brought up 2 CPUs [ 13.779257] migration_cost=18 [ 13.779410] NET: Registered protocol family 16 [ 13.779477] ACPI: bus type pci registered [ 13.779483] PCI: Using configuration type 1 [ 13.780467] ACPI: EC: Look up EC in DSDT [ 13.781176] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 13.787547] ACPI: System BIOS is requesting _OSI(Linux) [ 13.787549] ACPI: Please test with "acpi_osi=!Linux" [ 13.787550] Please send dmidecode to linux-acpi@vger.kernel.org [ 13.788011] ACPI: Interpreter enabled [ 13.788013] ACPI: (supports S0 S3 S4 S5) [ 13.788028] ACPI: Using IOAPIC for interrupt routing [ 13.840409] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 13.840440] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.840446] PCI: Probing PCI hardware (bus 00) [ 13.842575] PCI: Transparent bridge - 0000:00:1e.0 [ 13.842727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.843056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 13.843175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 13.843288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 13.843403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 13.843519] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.843651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 13.854139] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.854230] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 13.854319] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 13.854407] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 13.854495] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 13.854585] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 13.854674] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 13.854767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 13.854857] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.854867] pnp: PnP ACPI init [ 13.854875] ACPI: bus type pnp registered [ 13.875896] pnp: PnP ACPI: found 10 devices [ 13.875898] ACPI: ACPI bus type pnp unregistered [ 13.875935] PCI: Using ACPI for IRQ routing [ 13.875937] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.876094] NET: Registered protocol family 8 [ 13.876095] NET: Registered protocol family 20 [ 13.876107] PCI-GART: No AMD northbridge found. [ 13.876112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.876116] hpet0: 3 64-bit timers, 14318180 Hz [ 13.877151] pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 13.877154] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 13.877157] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 13.877159] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 13.877164] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 13.877400] PCI: Bridge: 0000:00:01.0 [ 13.877402] IO window: 2000-2fff [ 13.877405] MEM window: c7e00000-c7efffff [ 13.877408] PREFETCH window: d0000000-dfffffff [ 13.877411] PCI: Bridge: 0000:00:1c.0 [ 13.877414] IO window: 3000-3fff [ 13.877419] MEM window: c0000000-c3ffffff [ 13.877424] PREFETCH window: cc000000-cdffffff [ 13.877430] PCI: Bridge: 0000:00:1c.1 [ 13.877432] IO window: 4000-4fff [ 13.877438] MEM window: f0000000-f3ffffff [ 13.877442] PREFETCH window: fa000000-fbffffff [ 13.877448] PCI: Bridge: 0000:00:1c.2 [ 13.877451] IO window: 5000-5fff [ 13.877456] MEM window: f4000000-f7ffffff [ 13.877461] PREFETCH window: fc000000-fdffffff [ 13.877466] PCI: Bridge: 0000:00:1c.3 [ 13.877469] IO window: 6000-6fff [ 13.877475] MEM window: b8000000-bbffffff [ 13.877479] PREFETCH window: c8000000-c9ffffff [ 13.877486] PCI: Bus 13, cardbus bridge: 0000:0c:04.0 [ 13.877488] IO window: 00007000-000070ff [ 13.877493] IO window: 00007400-000074ff [ 13.877498] PREFETCH window: 50000000-53ffffff [ 13.877503] MEM window: 58000000-5bffffff [ 13.877508] PCI: Bridge: 0000:00:1e.0 [ 13.877510] IO window: 7000-7fff [ 13.877516] MEM window: f8000000-f80fffff [ 13.877520] PREFETCH window: 50000000-53ffffff [ 13.877534] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.877538] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.877560] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.877565] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.877587] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 13.877592] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.877614] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 13.877619] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 13.877641] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 13.877646] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.877659] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.877675] ACPI: PCI Interrupt 0000:0c:04.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.877687] NET: Registered protocol family 2 [ 13.879710] Time: hpet clocksource has been installed. [ 13.911705] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 13.911994] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 13.913042] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 13.913436] TCP: Hash tables configured (established 131072 bind 65536) [ 13.913439] TCP reno registered [ 13.923766] checking if image is initramfs... it is [ 14.550867] Freeing initrd memory: 7757k freed [ 14.554268] Simple Boot Flag at 0x36 set to 0x1 [ 14.554720] audit: initializing netlink socket (disabled) [ 14.554737] audit(1193690736.340:1): initialized [ 14.556394] VFS: Disk quotas dquot_6.5.1 [ 14.556433] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 14.556509] io scheduler noop registered [ 14.556510] io scheduler anticipatory registered [ 14.556512] io scheduler deadline registered [ 14.556585] io scheduler cfq registered (default) [ 14.560156] Boot video device is 0000:01:00.0 [ 14.560274] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 14.560305] assign_interrupt_mode Found MSI capability [ 14.560308] Allocate Port Service[0000:00:01.0:pcie00] [ 14.560335] Allocate Port Service[0000:00:01.0:pcie02] [ 14.560402] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 14.560457] assign_interrupt_mode Found MSI capability [ 14.560459] Allocate Port Service[0000:00:1c.0:pcie00] [ 14.560483] Allocate Port Service[0000:00:1c.0:pcie02] [ 14.560571] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 14.560627] assign_interrupt_mode Found MSI capability [ 14.560628] Allocate Port Service[0000:00:1c.1:pcie00] [ 14.560652] Allocate Port Service[0000:00:1c.1:pcie02] [ 14.560741] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 14.560796] assign_interrupt_mode Found MSI capability [ 14.560798] Allocate Port Service[0000:00:1c.2:pcie00] [ 14.560821] Allocate Port Service[0000:00:1c.2:pcie02] [ 14.560909] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 14.560964] assign_interrupt_mode Found MSI capability [ 14.560966] Allocate Port Service[0000:00:1c.3:pcie00] [ 14.560991] Allocate Port Service[0000:00:1c.3:pcie02] [ 14.577498] Real Time Clock Driver v1.12ac [ 14.577684] hpet_resources: 0xfed00000 is busy [ 14.577707] Linux agpgart interface v0.102 (c) Dave Jones [ 14.577709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.578495] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.578598] input: Macintosh mouse button emulation as /class/input/input0 [ 14.578659] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.611277] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.611281] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.611401] mice: PS/2 mouse device common for all mice [ 14.611572] TCP cubic registered [ 14.612515] NET: Registered protocol family 1 [ 14.612679] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 14.612684] Freeing unused kernel memory: 296k freed [ 14.635223] input: AT Translated Set 2 keyboard as /class/input/input1 [ 15.749703] AppArmor: AppArmor initialized<5>audit(1193690737.544:2): type=1505 info="AppArmor initialized" pid=1269 [ 15.754521] fuse init (API version 7.8) [ 15.757977] Failure registering capabilities with primary security module. [ 15.782307] ACPI: SSDT 3FED882B, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 15.782495] ACPI: SSDT 3FED82FC, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 15.785234] Monitor-Mwait will be used to enter C-1 state [ 15.785237] Monitor-Mwait will be used to enter C-2 state [ 15.785239] Monitor-Mwait will be used to enter C-3 state [ 15.785242] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 15.785246] ACPI: Processor [CPU0] (supports 8 throttling states) [ 15.785444] ACPI: SSDT 3FED8AA5, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 15.785617] ACPI: SSDT 3FED87A6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 15.786113] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 15.786117] ACPI: Processor [CPU1] (supports 8 throttling states) [ 16.070830] usbcore: registered new interface driver usbfs [ 16.070849] usbcore: registered new interface driver hub [ 16.078128] usbcore: registered new device driver usb [ 16.078757] USB Universal Host Controller Interface driver v3.0 [ 16.078831] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.078842] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 16.078845] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 16.078970] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 16.079003] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 16.079096] usb usb1: configuration #1 chosen from 1 choice [ 16.079119] hub 1-0:1.0: USB hub found [ 16.079124] hub 1-0:1.0: 2 ports detected [ 16.102358] SCSI subsystem initialized [ 16.105861] libata version 2.21 loaded. [ 16.181042] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 16.181053] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 16.181057] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 16.181168] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 16.181199] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 16.181449] usb usb2: configuration #1 chosen from 1 choice [ 16.181555] hub 2-0:1.0: USB hub found [ 16.181559] hub 2-0:1.0: 2 ports detected [ 16.204881] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 16.204888] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.204892] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.205007] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 16.205035] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 16.205281] usb usb3: configuration #1 chosen from 1 choice [ 16.205392] hub 3-0:1.0: USB hub found [ 16.205396] hub 3-0:1.0: 2 ports detected [ 16.225981] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 16.225990] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.225995] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.226115] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 16.226142] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 16.226421] usb usb4: configuration #1 chosen from 1 choice [ 16.226540] hub 4-0:1.0: USB hub found [ 16.226544] hub 4-0:1.0: 2 ports detected [ 16.231912] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 16.250380] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 16.250390] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.250394] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.250528] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 16.250563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 16.250856] usb usb5: configuration #1 chosen from 1 choice [ 16.250993] hub 5-0:1.0: USB hub found [ 16.250997] hub 5-0:1.0: 2 ports detected [ 16.269599] usb 1-1: configuration #1 chosen from 1 choice [ 16.270618] ahci 0000:00:1f.2: version 2.2 [ 16.270639] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 16.342843] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 16.386891] usb 2-1: configuration #1 chosen from 1 choice [ 16.509214] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 16.509220] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 16.509228] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 16.509468] scsi0 : ahci [ 16.509504] scsi1 : ahci [ 16.509538] scsi2 : ahci [ 16.509607] ata1: SATA max UDMA/133 cmd 0xffffc2000060c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 [ 16.509611] ata2: SATA max UDMA/133 cmd 0xffffc2000060c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 [ 16.509614] ata3: SATA max UDMA/133 cmd 0xffffc2000060c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 [ 16.639150] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.640075] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100 [ 16.640080] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 16.641182] ata1.00: configured for UDMA/100 [ 16.705898] ata2: SATA link down (SStatus 0 SControl 300) [ 16.842438] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.843342] ata3.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC7DP, max UDMA/100 [ 16.843347] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 16.844453] ata3.00: configured for UDMA/100 [ 16.844582] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 16.844670] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 16.845015] r8169 Gigabit Ethernet driver 2.2LK loaded [ 16.845043] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 16.845063] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 16.845250] eth0: RTL8101e at 0xffffc2000060e000, 00:1b:38:40:b2:0c, XID 34000000 IRQ 17 [ 16.846191] ACPI: PCI Interrupt 0000:0c:04.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 16.846243] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 [ 16.847145] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 16.847150] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 16.847194] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 16.847229] ehci_hcd 0000:00:1a.7: debug port 1 [ 16.847234] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 16.847241] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8304800 [ 16.851114] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.851188] usb usb6: configuration #1 chosen from 1 choice [ 16.851212] hub 6-0:1.0: USB hub found [ 16.851217] hub 6-0:1.0: 4 ports detected [ 16.896868] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8006000-f80067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 16.899624] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 16.899634] sd 0:0:0:0: [sda] Write Protect is off [ 16.899636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.899646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.899683] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 16.899689] sd 0:0:0:0: [sda] Write Protect is off [ 16.899690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.899700] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.899703] sda:<6>usb 1-1: USB disconnect, address 2 [ 16.954453] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 16.955558] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 16.955564] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 16.955605] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 16.955641] ehci_hcd 0000:00:1d.7: debug port 1 [ 16.955647] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 16.955653] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8304c00 [ 16.959527] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 16.959599] usb usb7: configuration #1 chosen from 1 choice [ 16.959620] hub 7-0:1.0: USB hub found [ 16.959625] hub 7-0:1.0: 6 ports detected [ 17.062295] ata_piix 0000:00:1f.1: version 2.11 [ 17.062315] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19 [ 17.062354] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 17.062575] scsi3 : ata_piix [ 17.062716] scsi4 : ata_piix [ 17.062773] ata4: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x00000000000118a0 irq 14 [ 17.062776] ata5: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x00000000000118a8 irq 15 [ 17.314711] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 17.390891] sd 0:0:0:0: [sda] Attached SCSI disk [ 17.391019] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 17.391027] sd 2:0:0:0: [sdb] Write Protect is off [ 17.391028] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.391038] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.391066] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) [ 17.391071] sd 2:0:0:0: [sdb] Write Protect is off [ 17.391073] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.391082] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.391085] sdb:<6>ata4.00: ATAPI: PIONEER DVD-RW DVR-K17LF, 4.53, max UDMA/33 [ 17.521589] usb 6-3: new high speed USB device using ehci_hcd and address 3 [ 17.585989] ata4.00: configured for UDMA/33 [ 17.667541] usb 6-3: configuration #1 chosen from 1 choice [ 17.669546] usb 2-1: USB disconnect, address 2 [ 17.761880] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17LF 4.53 PQ: 0 ANSI: 5 [ 17.803870] sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 > [ 17.888337] sd 2:0:0:0: [sdb] Attached SCSI disk [ 17.890741] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 17.890756] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 17.890770] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 17.939887] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 17.939894] Uniform CD-ROM driver Revision: 3.20 [ 17.940185] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 18.036858] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 18.165066] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f78ae402adb] [ 18.212958] usb 1-1: configuration #1 chosen from 1 choice [ 18.470995] Attempting manual resume [ 18.470998] swsusp: Resume From Partition 8:5 [ 18.470999] PM: Checking swsusp image. [ 18.471167] PM: Resume from disk failed. [ 18.512569] kjournald starting. Commit interval 5 seconds [ 18.512594] EXT3-fs: mounted filesystem with ordered data mode. [ 26.355167] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 26.413383] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 26.482213] Yenta: CardBus bridge found at 0000:0c:04.0 [1179:ff00] [ 26.482234] Yenta: Enabling burst memory read transactions [ 26.482239] Yenta: Using CSCINT to route CSC interrupts to PCI [ 26.482241] Yenta: Routing CardBus interrupts to PCI [ 26.482246] Yenta TI: socket 0000:0c:04.0, mfunc 0x10a01b22, devctl 0x64 [ 26.583443] sdhci: Secure Digital Host Controller Interface driver [ 26.583446] sdhci: Copyright(c) Pierre Ossman [ 26.660484] Linux video capture interface: v2.00 [ 26.713437] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 [ 26.713441] Socket status: 30000006 [ 26.713443] Yenta: Raising subordinate bus# of parent bus (#0c) from #0d to #10 [ 26.713449] pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff [ 26.713451] pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xf80fffff [ 26.713453] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 26.713672] ACPI: PCI Interrupt 0000:0c:04.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.713748] sdhci: SDHCI controller found at 0000:0c:04.3 [104c:803c] (rev 0) [ 26.713766] ACPI: PCI Interrupt 0000:0c:04.3[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.714664] mmc0: SDHCI at 0xf8006800 irq 18 DMA [ 26.798920] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 26.800775] usbcore: registered new interface driver uvcvideo [ 26.800780] USB Video Class driver (v0.1.0) [ 26.903625] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 26.914486] [fglrx] Maximum main memory to use for locked dma buffers: 922 MBytes. [ 26.914516] [fglrx] ASYNCIO init succeed! [ 26.916177] [fglrx] PAT is enabled successfully! [ 26.916197] [fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0 [ 26.941994] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.1.0 [ 26.941996] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 26.942091] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 26.942120] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 26.942948] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 27.186432] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 27.187339] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 27.276734] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels [ 27.276889] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 27.412430] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000 [ 27.503437] input: SynPS/2 Synaptics TouchPad as /class/input/input2 [ 27.567926] NET: Registered protocol family 17 [ 28.502231] si3054: cannot initialize. EXT MID = 0000 [ 29.655658] lp: driver loaded but no devices found [ 29.715679] Adding 8193108k swap on /dev/sda5. Priority:-1 extents:1 across:8193108k [ 30.782690] EXT3 FS on sda7, internal journal [ 52.310792] kjournald starting. Commit interval 5 seconds [ 52.311021] EXT3 FS on sda10, internal journal [ 52.311026] EXT3-fs: mounted filesystem with ordered data mode. [ 52.833655] kjournald starting. Commit interval 5 seconds [ 52.833908] EXT3 FS on sda8, internal journal [ 52.833913] EXT3-fs: mounted filesystem with ordered data mode. [ 52.851652] kjournald starting. Commit interval 5 seconds [ 52.851889] EXT3 FS on sda9, internal journal [ 52.851893] EXT3-fs: mounted filesystem with ordered data mode. [ 53.340203] kjournald starting. Commit interval 5 seconds [ 53.380421] EXT3 FS on sda6, internal journal [ 53.380425] EXT3-fs: mounted filesystem with ordered data mode. [ 54.168409] ACPI: Battery Slot [BAT1] (battery present) [ 54.175174] No dock devices found. [ 54.240179] ACPI: AC Adapter [ACAD] (on-line) [ 54.259038] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 54.259443] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 54.306140] input: Power Button (FF) as /class/input/input3 [ 54.306155] ACPI: Power Button (FF) [PWRF] [ 54.306186] input: Lid Switch as /class/input/input4 [ 54.306196] ACPI: Lid Switch [LID0] [ 54.306221] input: Power Button (CM) as /class/input/input5 [ 54.306231] ACPI: Power Button (CM) [PWRB] [ 55.523426] ppdev: user-space parallel port driver [ 55.662036] r8169: eth0: link up [ 55.662052] r8169: eth0: link up [ 55.789764] audit(1193661980.307:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5451 profile="/usr/sbin/cupsd" [ 56.189221] Failure registering capabilities with primary security module. [ 56.458213] Bluetooth: Core ver 2.11 [ 56.458305] NET: Registered protocol family 31 [ 56.458310] Bluetooth: HCI device and connection manager initialized [ 56.458357] Bluetooth: HCI socket layer initialized [ 56.495208] Bluetooth: L2CAP ver 2.8 [ 56.495216] Bluetooth: L2CAP socket layer initialized [ 56.566836] Bluetooth: RFCOMM socket layer initialized [ 56.566864] Bluetooth: RFCOMM TTY layer initialized [ 56.566869] Bluetooth: RFCOMM ver 1.8 [ 58.001010] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 60.188941] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 60.188952] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 60.188959] [fglrx] Reserve Block - 2 offset = 0Xff7a000 length = 0X80000 [ 60.422558] [fglrx] interrupt source 60000001 successfully enabled [ 60.422567] [fglrx] enable ID = 0x00000006 [ 60.422923] [fglrx] Receive enable interrupt message with irqEnableMask: 60000001 [ 60.423248] [fglrx] interrupt source 00000040 successfully enabled [ 60.423254] [fglrx] enable ID = 0x00000007 [ 60.423552] [fglrx] Receive enable interrupt message with irqEnableMask: 00000040 [ 60.424134] [fglrx] interrupt source ff00002c successfully enabled [ 60.424140] [fglrx] enable ID = 0x00000008 [ 60.424443] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c [ 60.424728] [fglrx] interrupt source ff00002d successfully enabled [ 60.424733] [fglrx] enable ID = 0x00000009 [ 60.425033] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d [ 60.425318] [fglrx] interrupt source 20000400 successfully enabled [ 60.425324] [fglrx] enable ID = 0x0000000A [ 60.425622] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400 [ 62.284504] NET: Registered protocol family 10 [ 62.284888] lo: Disabled Privacy Extensions [ 62.285169] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 66.866923] eth0: no IPv6 routers present [ 72.834190] ata1.00: exception Emask 0x2 SAct 0x6b SErr 0x0 action 0x2 frozen [ 72.834205] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x6b FIS=005040a1:00000004) [ 72.834219] ata1.00: cmd 60/08:00:32:a6:43/00:00:07:00:00/40 tag 0 cdb 0x0 data 4096 in [ 72.834223] res 50/00:08:4a:63:90/00:00:06:00:00/40 Emask 0x2 (HSM violation) [ 72.834235] ata1.00: cmd 60/20:08:72:99:b0/00:00:07:00:00/40 tag 1 cdb 0x0 data 16384 in [ 72.834238] res 50/00:08:4a:63:90/00:00:06:00:00/40 Emask 0x2 (HSM violation) [ 72.834250] ata1.00: cmd 60/08:18:4a:63:90/00:00:06:00:00/40 tag 3 cdb 0x0 data 4096 in [ 72.834253] res 50/00:08:4a:63:90/00:00:06:00:00/40 Emask 0x2 (HSM violation) [ 72.834265] ata1.00: cmd 60/00:28:62:bc:43/01:00:07:00:00/40 tag 5 cdb 0x0 data 131072 in [ 72.834269] res 50/00:08:4a:63:90/00:00:06:00:00/40 Emask 0x2 (HSM violation) [ 72.834281] ata1.00: cmd 60/08:30:2a:a3:c5/00:00:07:00:00/40 tag 6 cdb 0x0 data 4096 in [ 72.834284] res 50/00:08:4a:63:90/00:00:06:00:00/40 Emask 0x2 (HSM violation) [ 72.860672] ata1: soft resetting port [ 72.868589] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 72.869560] ata1.00: configured for UDMA/100 [ 72.869594] ata1: EH complete [ 72.869879] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 72.870080] sd 0:0:0:0: [sda] Write Protect is off [ 72.870085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 72.870359] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 77.364545] ata1.00: exception Emask 0x2 SAct 0x81 SErr 0x0 action 0x2 frozen [ 77.364553] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x81 FIS=005040a1:00000400) [ 77.364562] ata1.00: cmd 60/48:00:82:6d:a4/00:00:07:00:00/40 tag 0 cdb 0x0 data 36864 in [ 77.364565] res 50/00:48:82:6d:a4/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 77.364573] ata1.00: cmd 60/08:38:aa:dd:41/00:00:07:00:00/40 tag 7 cdb 0x0 data 4096 in [ 77.364575] res 50/00:48:82:6d:a4/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 77.385322] ata1: soft resetting port [ 77.393184] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 77.395237] ata1.00: configured for UDMA/100 [ 77.395255] ata1: EH complete [ 77.395522] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 77.395724] sd 0:0:0:0: [sda] Write Protect is off [ 77.395730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 77.396007] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 78.237317] ata1.00: exception Emask 0x2 SAct 0x3a SErr 0x0 action 0x2 frozen [ 78.237328] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x3a FIS=005040a1:00000001) [ 78.237342] ata1.00: cmd 60/90:08:da:8f:a7/00:00:07:00:00/40 tag 1 cdb 0x0 data 73728 in [ 78.237345] res 50/00:90:da:8f:a7/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 78.237358] ata1.00: cmd 60/e0:18:32:1e:88/00:00:06:00:00/40 tag 3 cdb 0x0 data 114688 in [ 78.237361] res 50/00:90:da:8f:a7/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 78.237373] ata1.00: cmd 60/00:20:2a:27:88/01:00:06:00:00/40 tag 4 cdb 0x0 data 131072 in [ 78.237376] res 50/00:90:da:8f:a7/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 78.237388] ata1.00: cmd 60/20:28:02:67:af/00:00:07:00:00/40 tag 5 cdb 0x0 data 16384 in [ 78.237391] res 50/00:90:da:8f:a7/00:00:07:00:00/40 Emask 0x2 (HSM violation) [ 78.261595] ata1: soft resetting port [ 78.284712] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 78.286743] ata1.00: configured for UDMA/100 [ 78.286771] ata1: EH complete [ 78.287015] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 78.287183] sd 0:0:0:0: [sda] Write Protect is off [ 78.287189] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 78.287502] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 125.910062] Xgl[6120]: segfault at 0000000000000010 rip 00002b319d00cff8 rsp 00007fff0ed77480 error 6 [ 126.393517] [fglrx] interrupt source 20000400 successfully disabled! [ 126.393525] [fglrx] enable ID = 0x00000000 [ 126.393529] [fglrx] Receive disable interrupt message with irqEnableMask: 20000400; dwIRQEnableId: 0000000a [ 126.393545] [fglrx] interrupt source ff00002d successfully disabled! [ 126.393548] [fglrx] enable ID = 0x00000000 [ 126.393552] [fglrx] Receive disable interrupt message with irqEnableMask: ff00002d; dwIRQEnableId: 00000009 [ 126.393565] [fglrx] interrupt source ff00002c successfully disabled! [ 126.393568] [fglrx] enable ID = 0x00000000 [ 126.393571] [fglrx] Receive disable interrupt message with irqEnableMask: ff00002c; dwIRQEnableId: 00000008 [ 126.393584] [fglrx] interrupt source 00000040 successfully disabled! [ 126.393587] [fglrx] enable ID = 0x00000000 [ 126.393590] [fglrx] Receive disable interrupt message with irqEnableMask: 00000040; dwIRQEnableId: 00000007 [ 126.393603] [fglrx] interrupt source 60000001 successfully disabled! [ 126.393606] [fglrx] enable ID = 0x00000000 [ 126.393610] [fglrx] Receive disable interrupt message with irqEnableMask: 60000001; dwIRQEnableId: 00000006 [ 129.627049] [fglrx] PCIe has already been initialized. Reinitializing ... [ 129.648836] [fglrx] Reserve Block - 0 offset = 0Xfffb000 length = 0X5000 [ 129.648847] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 129.648849] [fglrx] Reserve Block - 2 offset = 0Xff7a000 length = 0X80000 [ 129.945215] [fglrx] interrupt source ff00002c successfully enabled [ 129.945226] [fglrx] enable ID = 0x00000006 [ 129.945233] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002c [ 129.945278] [fglrx] interrupt source ff00002d successfully enabled [ 129.945280] [fglrx] enable ID = 0x00000007 [ 129.945283] [fglrx] Receive enable interrupt message with irqEnableMask: ff00002d [ 129.945308] [fglrx] interrupt source 20000400 successfully enabled [ 129.945310] [fglrx] enable ID = 0x00000008 [ 129.945313] [fglrx] Receive enable interrupt message with irqEnableMask: 20000400 [ 142.345580] ata1.00: NCQ disabled due to excessive errors [ 142.345594] ata1.00: exception Emask 0x2 SAct 0x3fe1 SErr 0x0 action 0x2 frozen [ 142.345602] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x3fe1 FIS=005040a1:00000010) [ 142.345615] ata1.00: cmd 61/70:00:a5:55:91/00:00:05:00:00/40 tag 0 cdb 0x0 data 57344 out [ 142.345619] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345631] ata1.00: cmd 61/10:28:5a:1b:73/00:00:07:00:00/40 tag 5 cdb 0x0 data 8192 out [ 142.345635] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345647] ata1.00: cmd 61/08:30:d2:1b:73/00:00:07:00:00/40 tag 6 cdb 0x0 data 4096 out [ 142.345650] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345662] ata1.00: cmd 61/08:38:e2:1b:73/00:00:07:00:00/40 tag 7 cdb 0x0 data 4096 out [ 142.345666] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345677] ata1.00: cmd 61/08:40:f2:1b:73/00:00:07:00:00/40 tag 8 cdb 0x0 data 4096 out [ 142.345681] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345693] ata1.00: cmd 61/10:48:fa:1b:73/00:00:07:00:00/40 tag 9 cdb 0x0 data 8192 out [ 142.345696] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345708] ata1.00: cmd 61/08:50:02:1d:73/00:00:07:00:00/40 tag 10 cdb 0x0 data 4096 out [ 142.345712] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345724] ata1.00: cmd 61/08:58:12:1d:73/00:00:07:00:00/40 tag 11 cdb 0x0 data 4096 out [ 142.345727] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345739] ata1.00: cmd 61/08:60:42:1d:73/00:00:07:00:00/40 tag 12 cdb 0x0 data 4096 out [ 142.345743] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.345755] ata1.00: cmd 61/28:68:4a:1d:73/00:00:07:00:00/40 tag 13 cdb 0x0 data 20480 out [ 142.345759] res 50/00:70:a5:55:91/00:00:05:00:00/40 Emask 0x2 (HSM violation) [ 142.394522] ata1: soft resetting port [ 142.409376] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 142.411440] ata1.00: configured for UDMA/100 [ 142.411481] ata1: EH complete [ 142.414817] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) [ 142.415287] sd 0:0:0:0: [sda] Write Protect is off [ 142.415293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 142.417628] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA