Re: [Xenomai-help] xeno-test failed to open benchmark device, code -19 at t1 and t2 # latency

[Dennis Nguyen <dennisnguy@domain.hid>]

Jan Kiszka wrote:
> Dennis Nguyen wrote:
>   
>> Hi,
>>
>> I built 2.6.22.10 linux kernel -i386 with xenomai 2.4-rc4 and
>> adeos-ipipe-2.6.22-i386-1.10-09.patch.
>>
>> I checked enable SMI workaround, uncheck frequency scaling, uncheck ACPI
>> and uncheck APM.
>>
>> I ran xeno-test and get the following failed message:
>>
>> Thu Oct 25 13:17:02 PDT 2007
>> running: ./run -- -sh -T 120 -t1 # latency
>> *
>> *
>> * Type ^C to stop this application.
>> *
>> *
>> == Sampling period: 100 us
>> == Test mode: in-kernel periodic task
>> == All results in microseconds
>> latency: failed to open benchmark device, code -19
>> (modprobe xeno_timerbench?)
>>
>> Thu Oct 25 13:17:04 PDT 2007
>> running: ./run -- -sh -T 120 -t2 # latency
>> *
>> *
>> * Type ^C to stop this application.
>> *
>> *
>> == Sampling period: 100 us
>> == Test mode: in-kernel timer handler
>> == All results in microseconds
>> latency: failed to open benchmark device, code -19
>> (modprobe xeno_timerbench?)
>>
>> Could you help me to solve the issue?
>>     
>
> What does the kernel log say (=>dmesg) when you manually insert the
> module (=>modprobe xeno_timerbench)? Do you still have versioning
> conflicts with your modules (as reported on rtnet-users)?
>
> Jan
>
>   

I could not find xeno_timerbench. How to include the xeno_timerbench 
when it is built?
I got:
[root@domain.hid bin]# modprobe xeno_timerbench
FATAL: Module xeno_timerbench not found.

I don't know about the versioning conflicts.

Thanks,
Dennis