From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4727106F.4000703@domain.hid> Date: Tue, 30 Oct 2007 12:07:27 +0100 From: Wolfgang Grandegger MIME-Version: 1.0 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-core] Xenomai on Efika board List-Id: "Xenomai life and development \(bug reports, patches, discussions\)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Daniel Schnell Cc: xenomai@xenomai.org Daniel Schnell wrote: > Giammarco Zacheo wrote: >> Does anybody ever tried to port Xenomai on a Efika board? >> >> http://www.genesippc.com/efika.php >> >> It is a freescale powerpc based board, with some patches to make >> linux work on it. I have read some emails on the net talking about >> RTAI, so what about Xenomai? >> >> Is is realistic that the adeos patch blindly work on the already >> patched kernel? > > > We have a MPC5200B based board running on a 2.6.23 Denx Linux Kernel, > which contains MPC5200B specific patches. Uboot support should exist > already for Efika. > > There is no apparent reason why Xenomai will not run on this board as > good as on our hardware. Kernel 2.6.24 should support it out of the box > as the MPC5200B patches are now inside the official Linux kernel. Korrekt if the board is supported by the arch/powerpc tree. Wolfgang.