From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4727107E.5040408@domain.hid> Date: Tue, 30 Oct 2007 12:07:42 +0100 From: Philippe Gerum MIME-Version: 1.0 References: In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: Philippe Gerum Subject: Re: [Xenomai-core] Xenomai on Efika board Reply-To: rpm@xenomai.org List-Id: "Xenomai life and development \(bug reports, patches, discussions\)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Giammarco Zacheo Cc: xenomai@xenomai.org Giammarco Zacheo wrote: > Does anybody ever tried to port Xenomai on a Efika board? > > http://www.genesippc.com/efika.php > > It is a freescale powerpc based board, with some patches to make linux > work on it. I have read some emails on the net talking about RTAI, so > what about Xenomai? > Xenomai is known to work fine on mpc52xx-based boards. It was actually the first powerpc hardware we ever supported (on an IceCube, at that time). > Is is realistic that the adeos patch blindly work on the already patched kernel? > It is at least realistic on a DENX kernel, since this is our reference tree for the powerpc arch, and all recent Adeos patches against the powerpc/ tree support the lite5200b. If your kernel tree comes from some other vendor/manufacturer, then, you may have some failed hunks to sort out manually, but there should not be any showstopper. > Thank you > > Giammarco > > _______________________________________________ > Xenomai-core mailing list > Xenomai-core@domain.hid > https://mail.gna.org/listinfo/xenomai-core > -- Philippe.