From: Harald Dunkel <harald.dunkel@t-online.de>
To: linux-kernel@vger.kernel.org
Subject: 2.6.24-rc1: usb problem?
Date: Tue, 30 Oct 2007 15:09:23 +0100 [thread overview]
Message-ID: <47273B13.5060603@t-online.de> (raw)
Hi folks,
I found this call trace in /var/kern.log:
:
:
Oct 30 14:59:36 pluto kernel: usb 1-2: config 1 descriptor has 1 excess byte, ignoring
Oct 30 14:59:36 pluto kernel: usb 1-2: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: usb 1-3: new high speed USB device using ehci_hcd and address 4
Oct 30 14:59:36 pluto kernel: usb 1-3: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Oct 30 14:59:36 pluto kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
Oct 30 14:59:36 pluto kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Oct 30 14:59:36 pluto kernel: ata3.00: configured for UDMA/100
Oct 30 14:59:36 pluto kernel: usb 1-5: new high speed USB device using ehci_hcd and address 5
Oct 30 14:59:36 pluto kernel: usb 1-5: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 6
Oct 30 14:59:36 pluto kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: USB hub found
Oct 30 14:59:36 pluto kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Oct 30 14:59:36 pluto kernel: hub 1-1.1:1.0: 4 ports detected
Oct 30 14:59:36 pluto kernel: sysfs: duplicate filename 'bInterfaceNumber' can not be created
Oct 30 14:59:36 pluto kernel: WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Oct 30 14:59:36 pluto kernel:
Oct 30 14:59:36 pluto kernel: Call Trace:
Oct 30 14:59:36 pluto kernel: [<ffffffff802d250e>] sysfs_add_one+0xae/0xe0
Oct 30 14:59:36 pluto kernel: [<ffffffff802d1dff>] sysfs_add_file+0x5f/0xb0
Oct 30 14:59:36 pluto kernel: [<ffffffff802d3dfc>] sysfs_create_group+0x6c/0x120
Oct 30 14:59:36 pluto kernel: [<ffffffff880283e6>] :usbcore:usb_create_sysfs_intf_files+0x46/0x100
Oct 30 14:59:36 pluto kernel: [<ffffffff88023e76>] :usbcore:usb_set_configuration+0x336/0x5f0
Oct 30 14:59:36 pluto kernel: [<ffffffff8802cd8c>] :usbcore:generic_probe+0x7c/0xb0
Oct 30 14:59:36 pluto kernel: [<ffffffff8037875b>] driver_probe_device+0x9b/0x1c0
Oct 30 14:59:36 pluto kernel: [<ffffffff80378880>] __device_attach+0x0/0x10
Oct 30 14:59:36 pluto kernel: [<ffffffff80377828>] bus_for_each_drv+0x58/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff80378958>] device_attach+0x88/0x90
Oct 30 14:59:36 pluto kernel: [<ffffffff80377785>] bus_attach_device+0x55/0xa0
Oct 30 14:59:36 pluto kernel: [<ffffffff80376468>] device_add+0x528/0x690
Oct 30 14:59:36 pluto kernel: [<ffffffff8801e2e5>] :usbcore:usb_new_device+0x55/0xa0
Oct 30 14:59:36 pluto kernel: [<ffffffff8801f759>] :usbcore:hub_thread+0x749/0xe10
Oct 30 14:59:36 pluto kernel: [<ffffffff80229083>] set_next_entity+0x23/0x50
Oct 30 14:59:36 pluto kernel: [<ffffffff802456b0>] autoremove_wake_function+0x0/0x30
Oct 30 14:59:36 pluto kernel: [<ffffffff8801f010>] :usbcore:hub_thread+0x0/0xe10
Oct 30 14:59:36 pluto kernel: [<ffffffff8024523b>] kthread+0x4b/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff8020c538>] child_rip+0xa/0x12
Oct 30 14:59:36 pluto kernel: [<ffffffff802451f0>] kthread+0x0/0x80
Oct 30 14:59:36 pluto kernel: [<ffffffff8020c52e>] child_rip+0x0/0x12
Oct 30 14:59:36 pluto kernel:
Oct 30 14:59:36 pluto kernel: ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183A, SB02, max UDMA/33
Oct 30 14:59:36 pluto kernel: ata4.00: applying bridge limits
Oct 30 14:59:36 pluto kernel: ata4.00: configured for UDMA/33
Oct 30 14:59:36 pluto kernel: scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
Oct 30 14:59:36 pluto kernel: usb 1-1.1.1: new high speed USB device using ehci_hcd and address 7
Oct 30 14:59:36 pluto kernel: scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183A SB02 PQ: 0 ANSI: 5
Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
Oct 30 14:59:36 pluto kernel: ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
:
:
uname says:
Linux pluto 2.6.24-rc1 #1 PREEMPT Sat Oct 27 22:56:02 CEST 2007 x86_64 GNU/Linux
Is this anything to worry about? Please mail if I can help to track this
down.
Regards
Harri
next reply other threads:[~2007-10-30 14:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-30 14:09 Harald Dunkel [this message]
2007-10-30 14:50 ` 2.6.24-rc1: usb problem? Oliver Neukum
2007-10-30 18:46 ` Vitaliy Ivanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47273B13.5060603@t-online.de \
--to=harald.dunkel@t-online.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.