From: Marcus Better <marcus@better.se>
To: linux-ppp@vger.kernel.org
Subject: Re: IPCP with mobile ISP sometimes gives bogus DNS address
Date: Wed, 31 Oct 2007 21:20:43 +0000 [thread overview]
Message-ID: <4728F1AB.3040904@better.se> (raw)
In-Reply-To: <fg82hb$nrp$1@ger.gmane.org>
Bill Unruh wrote:
> He supplies you with those but also windows server addresses. And below he
> demands that you accept them. That is apparently a non-negotiable demand
> for him. Put in at least one, maybe 2
> ms-wins 0.0.0.0
> into your pppd options.
That didn't seem to make a difference. I believe the ms-wins option is
only effective for incoming connections, but I may be wrong. See this
log, where the session succeeds, but it looks similar to previous ones:
Oct 31 21:44:56 melech pppd[5218]: Serial connection established.
Oct 31 21:44:56 melech pppd[5218]: using channel 7
Oct 31 21:44:56 melech pppd[5218]: Using interface ppp0
Oct 31 21:44:56 melech pppd[5218]: Connect: ppp0 <--> /dev/3gmodem
Oct 31 21:44:57 melech pppd[5218]: sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magic 0x453fe8e6> <pcomp> <accomp>]
Oct 31 21:44:57 melech pppd[5218]: rcvd [LCP ConfReq id=0x0 <asyncmap
0x0> <auth chap MD5> <magic 0x50e52ff> <pcomp> <accomp>]
Oct 31 21:44:57 melech pppd[5218]: sent [LCP ConfNak id=0x0 <auth pap>]
Oct 31 21:44:57 melech pppd[5218]: rcvd [LCP ConfAck id=0x1 <asyncmap
0x0> <magic 0x453fe8e6> <pcomp> <accomp>]
Oct 31 21:44:57 melech pppd[5218]: rcvd [LCP ConfReq id=0x1 <asyncmap
0x0> <auth pap> <magic 0x50e52ff> <pcomp> <accomp>]
Oct 31 21:44:57 melech pppd[5218]: sent [LCP ConfAck id=0x1 <asyncmap
0x0> <auth pap> <magic 0x50e52ff> <pcomp> <accomp>]
Oct 31 21:44:57 melech pppd[5218]: sent [PAP AuthReq id=0x1
user="melech" password=<hidden>]
Oct 31 21:44:57 melech pppd[5218]: rcvd [LCP DiscReq id=0x2 magic=0x50e52ff]
Oct 31 21:44:57 melech pppd[5218]: rcvd [PAP AuthAck id=0x1 ""]
Oct 31 21:44:57 melech pppd[5218]: PAP authentication succeeded
Oct 31 21:44:57 melech pppd[5218]: sent [IPCP ConfReq id=0x1 <addr
0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Oct 31 21:44:58 melech pppd[5218]: rcvd [IPCP ConfNak id=0x1 <ms-dns1
10.11.12.13> <ms-dns3 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins
10.11.12.14>]
Oct 31 21:44:58 melech pppd[5218]: sent [IPCP ConfReq id=0x2 <addr
0.0.0.0> <ms-dns1 10.11.12.13> <ms-dns3 10.11.12.14>]
Oct 31 21:44:58 melech pppd[5218]: rcvd [IPCP ConfReq id=0x0]
Oct 31 21:44:58 melech pppd[5218]: sent [IPCP ConfNak id=0x0 <addr 0.0.0.0>]
Oct 31 21:44:58 melech pppd[5218]: rcvd [IPCP ConfNak id=0x2 <addr
83.178.248.251> <ms-dns1 130.244.127.161> <ms-dns3 130.244.127.169>]
Oct 31 21:44:58 melech pppd[5218]: sent [IPCP ConfReq id=0x3 <addr
83.178.248.251> <ms-dns1 130.244.127.161> <ms-dns3 130.244.127.169>]
Oct 31 21:44:58 melech pppd[5218]: rcvd [IPCP ConfAck id=0x3 <addr
83.178.248.251> <ms-dns1 130.244.127.161> <ms-dns3 130.244.127.169>]
Oct 31 21:44:59 melech pppd[5218]: rcvd [IPCP ConfReq id=0x1]
Oct 31 21:44:59 melech pppd[5218]: sent [IPCP ConfAck id=0x1]
Oct 31 21:44:59 melech pppd[5218]: Could not determine remote IP
address: defaulting to 10.64.64.64
Oct 31 21:44:59 melech pppd[5218]: Cannot determine ethernet address for
proxy ARP
Oct 31 21:44:59 melech pppd[5218]: local IP address 83.178.248.251
Oct 31 21:44:59 melech pppd[5218]: remote IP address 10.64.64.64
Oct 31 21:44:59 melech pppd[5218]: primary DNS address 130.244.127.161
Oct 31 21:44:59 melech pppd[5218]: secondary DNS address 130.244.127.169
Thanks,
Marcus
next prev parent reply other threads:[~2007-10-31 21:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-10-30 20:00 IPCP with mobile ISP sometimes gives bogus DNS address Marcus Better
2007-10-30 22:55 ` James Cameron
2007-10-31 0:32 ` Bill Unruh
2007-10-31 0:48 ` James Cameron
2007-10-31 21:20 ` Marcus Better [this message]
2007-10-31 21:41 ` Bill Unruh
2007-11-01 8:33 ` Marcus Better
2007-11-01 8:35 ` Marcus Better
2007-11-01 23:09 ` James Cameron
2007-11-20 22:48 ` Marcus Better
2007-11-20 23:07 ` James Cameron
2007-11-21 5:44 ` Marcus Better
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4728F1AB.3040904@better.se \
--to=marcus@better.se \
--cc=linux-ppp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.