From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alfred Zastrow Subject: Re: Looking for NV44 testers? Date: Thu, 01 Nov 2007 14:08:54 +0100 Message-ID: <4729CFE6.50009@t-online.de> References: <4729C32E.6050105@t-online.de> <6a89f9d50711010547q7d06da6dkf919852d87c717e5@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <6a89f9d50711010547q7d06da6dkf919852d87c717e5-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: nouveau-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org Errors-To: nouveau-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org List-Id: nouveau.vger.kernel.org Stephane Marchesin schrieb: > Could you also please provide a matching kernel log ? Is everthing in you want to know? --------------- snipp------------ Linux version 2.6.23.1 (root@z1) (gcc version 4.2.2) #2 SMP PREEMPT Sun Oct 21 08:05:02 CEST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) 3712MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5e30 NX (Execute Disable) protection: active Entering add_active_range(0, 0, 1179648) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1179648 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1179648 On node 0 totalpages: 1179648 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 7424 pages used for memmap HighMem zone: 942848 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. ACPI: RSDP 000F7BC0, 0024 (r2 Nvidia) ACPI: XSDT DFEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP DFEEC880, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT DFEE3280, 959D (r1 NVIDIA AWRDACPI 1000 MSFT 3000000) ACPI: FACS DFEE0000, 0040 ACPI: SSDT DFEECA80, 0206 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET DFEECD00, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) ACPI: MCFG DFEECD80, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC DFEEC9C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 1170432 Kernel command line: BOOT_IMAGE=old_kernel_up rw root=/dev/sda1 quiet init=/usr/sbin/init mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2210.086 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4150980k/4718592k available (1881k kernel code, 41092k reserved, 707k data, 204k init, 3275648k highmem) virtual kernel memory layout: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc038d000 - 0xc03c0000 ( 204 kB) .data : 0xc02d651e - 0xc03874cc ( 707 kB) .text : 0xc0100000 - 0xc02d651e (1881 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz Calibrating delay using timer specific routine.. 4423.68 BogoMIPS (lpj=8847364) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4420.12 BogoMIPS (lpj=8840258) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Total of 2 processors activated (8843.81 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:0e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report ACPI: RTC can wake from S4 Time: hpet clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: 00:01: ioport range 0x1000-0x107f has been reserved pnp: 00:01: ioport range 0x1080-0x10ff has been reserved pnp: 00:01: ioport range 0x1400-0x147f has been reserved pnp: 00:01: ioport range 0x1480-0x14ff has been reserved pnp: 00:01: ioport range 0x1800-0x187f has been reserved pnp: 00:01: ioport range 0x1880-0x18ff has been reserved pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:0c: iomem range 0xea200-0xebfff has been reserved pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: fa000000-fcffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: fde00000-fdefffff PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:16.0 IO window: a000-afff MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:16.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:16.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:16.0:pcie00] Allocate Port Service[0000:00:16.0:pcie03] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16 nvidiafb: Device ID: 10de0161 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found i2c-adapter i2c-0: unable to read EDID block. i2c-adapter i2c-0: unable to read EDID block. i2c-adapter i2c-0: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1400 x 1050 nvidiafb: Panel is TMDS nvidiafb: MTRR set to ON fbcvt: 1400x1050@60: CVT Name - 1.470M3-R nvidiafb: Flat panel dithering disabled Console: switching to colour frame buffer device 175x65 nvidiafb: PCI nVidia NV16 framebuffer (64MB @ 0xE0000000) vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device hpet_resources: 0xfefff000 is busy RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 sata_sil24 0000:03:00.0: version 1.0 ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:03:00.0 to 64 scsi0 : sata_sil24 scsi1 : sata_sil24 ata1: SATA max UDMA/100 cmd 0xf8840000 ctl 0x00000000 bmdma 0x00000000 irq 16 ata2: SATA max UDMA/100 cmd 0xf8842000 ctl 0x00000000 bmdma 0x00000000 irq 16 ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) sata_nv 0000:00:0d.0: version 3.5 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0d.0 to 64 scsi2 : sata_nv scsi3 : sata_nv ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 17 ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 17 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-7: ST3500641NS, 3.AEC, max UDMA/133 ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST3500641NS 3.AE PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 3:0:0:0: [sda] Attached SCSI disk ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:0d.1 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001cc00 irq 18 ata6: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001cc08 irq 18 ata5: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0d.2 to 64 scsi6 : sata_nv scsi7 : sata_nv ata7: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c402 bmdma 0x0001b800 irq 19 ata8: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma 0x0001b808 irq 19 ata7: SATA link down (SStatus 0 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: replayed 74 transactions in 3 seconds ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 204k freed hda: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0a.1 to 64 ehci_hcd 0000:00:0a.1: EHCI Host Controller ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0a.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:0a.1 ehci_hcd 0000:00:0a.1: irq 20, io mem 0xfe02e000 ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:0e.1 to 64 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:10.0 to 64 forcedeth: using HIGHDMA sd 3:0:0:0: Attached scsi generic sg0 type 0 usb 1-9: new high speed USB device using ehci_hcd and address 3 usb 1-9: configuration #1 chosen from 1 choice eth0: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:10.0 ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:11.0 to 64 forcedeth: using HIGHDMA ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: Fan [FAN] (on) Linux video capture interface: v2.00 NET: Registered protocol family 10 eth1: forcedeth.c: subsystem: 01043:cb84 bound to 0000:00:11.0 i2c-adapter i2c-3: nForce2 SMBus adapter at 0x1c00 i2c-adapter i2c-4: nForce2 SMBus adapter at 0x1c40 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0a.0: irq 20, io mem 0xfe02f000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 usb 2-2: new low speed USB device using ohci_hcd and address 2 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 21 bttv0: Bt878 (rev 2) at 0000:02:07.0, irq: 21, latency: 32, mmio: 0xfdfff000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 5-0050: Hauppauge model 61334, rev A1B , serial# 607188 tveeprom 5-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 5-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 5-0050: audio processor is MSP3415 (idx 6) tveeprom 5-0050: has radio bttv0: Hauppauge eeprom indicates model#61334 bttv0: tuner type=5 bttv0: i2c: checking for MSP34xx @ 0x80... found msp3400 5-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw]) msp3400 5-0040: MSP3410D-B4 supports nicam, mode is autodetect bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner 5-0061: chip found @ 0xc2 (bt878 #0 [sw]) tuner 5-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) tuner 5-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 ..<6>usb 2-2: configuration #1 chosen from 1 choice ok wmaster0: Selected rate control algorithm 'simple' phy0: hwaddr 00:15:af:01:80:bd, rtl8187 V1 + rtl8225z2 usbcore: registered new interface driver rtl8187 eth1: no link during initialization. ADDRCONF(NETDEV_UP): eth1: link is not ready eth0: no link during initialization. ADDRCONF(NETDEV_UP): eth0: link is not ready input: USB HIDBP Mouse 062a:0000 as /class/input/input3 usbcore: registered new interface driver usbmouse drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver eth0: link up. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Adding 19286024k swap on /dev/sda2. Priority:1 extents:1 across:19286024k tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. eth0: no IPv6 routers present Linux agpgart interface v0.102 [drm] Initialized drm 1.1.0 20060810 PCI: Setting latency timer of device 0000:01:00.0 to 64 [drm] Detected an NV44 generation card (0x044100a2) [drm] Initialized nouveau 0.0.10 20060213 on minor 0 [drm] Used old pci detect: framebuffer loaded