From: Mark Lord <liml@rtr.ca>
To: Jeff Garzik <jgarzik@pobox.com>, Tejun Heo <htejun@gmail.com>,
Alan Cox <alan@redhat.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH 2/4] libata sata_qstor nuke idle state
Date: Wed, 07 Nov 2007 10:52:55 -0500 [thread overview]
Message-ID: <4731DF57.9010701@rtr.ca> (raw)
In-Reply-To: <4731DF06.3050202@rtr.ca>
sata_qstor nuke idle state.
We're really only ever in one of two hardware states: packet, or mmio.
Get rid of unnecessary "qs_state_idle" state.
This belongs in 2.6.24.
Signed-off-by: Mark Lord <mlord@pobox.com>
---
--- old/drivers/ata/sata_qstor.c 2007-11-07 07:41:28.000000000 -0500
+++ linux/drivers/ata/sata_qstor.c 2007-11-07 08:06:29.000000000 -0500
@@ -103,7 +103,7 @@
QS_DMA_BOUNDARY = ~0UL
};
-typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
+typedef enum { qs_state_mmio, qs_state_pkt } qs_state_t;
struct qs_port_priv {
u8 *pkt;
@@ -222,7 +222,9 @@
static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
+ struct qs_port_priv *pp = ap->private_data;
+ pp->state = qs_state_mmio;
writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
readb(chan + QS_CCT_CTR0); /* flush */
}
@@ -238,19 +240,12 @@
static void qs_phy_reset(struct ata_port *ap)
{
- struct qs_port_priv *pp = ap->private_data;
-
- pp->state = qs_state_idle;
qs_reset_channel_logic(ap);
sata_phy_reset(ap);
}
static void qs_eng_timeout(struct ata_port *ap)
{
- struct qs_port_priv *pp = ap->private_data;
-
- if (pp->state != qs_state_idle) /* healthy paranoia */
- pp->state = qs_state_mmio;
qs_reset_channel_logic(ap);
ata_eng_timeout(ap);
}
@@ -409,7 +404,6 @@
switch (sHST) {
case 0: /* successful CPB */
case 3: /* device error */
- pp->state = qs_state_idle;
qs_enter_reg_mode(qc->ap);
qc->err_mask |= ac_err_mask(sDST);
ata_qc_complete(qc);
@@ -448,7 +442,6 @@
ap->print_id, qc->tf.protocol, status);
/* complete taskfile transaction */
- pp->state = qs_state_idle;
qc->err_mask |= ac_err_mask(status);
ata_qc_complete(qc);
handled = 1;
@@ -504,7 +497,6 @@
rc = ata_port_start(ap);
if (rc)
return rc;
- qs_enter_reg_mode(ap);
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
@@ -515,6 +507,7 @@
memset(pp->pkt, 0, QS_PKT_BYTES);
ap->private_data = pp;
+ qs_enter_reg_mode(ap);
addr = (u64)pp->pkt_dma;
writel((u32) addr, chan + QS_CCF_CPBA);
writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
next prev parent reply other threads:[~2007-11-07 15:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-07 15:51 [PATCH 1/4] libata sata_qstor fix oops on rmmod Mark Lord
2007-11-07 15:52 ` Mark Lord [this message]
2007-11-08 18:14 ` [PATCH 2/4] libata sata_qstor nuke idle state Jeff Garzik
2007-11-07 15:53 ` [PATCH 3/4] libata sata_qstor workaround for spurious interrupts Mark Lord
2007-11-07 15:54 ` [PATCH 4/4] libata sata_qstor conversion to new error handling (EH) Mark Lord
2007-11-07 23:27 ` Jeff Garzik
2007-11-07 23:32 ` Mark Lord
2007-11-07 23:36 ` Mark Lord
2007-11-07 23:45 ` Jeff Garzik
2007-11-07 23:58 ` Mark Lord
2007-11-07 16:24 ` [PATCH 1/4] libata sata_qstor fix oops on rmmod Mark Lord
2007-11-08 2:30 ` Tejun Heo
2007-11-08 13:45 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4731DF57.9010701@rtr.ca \
--to=liml@rtr.ca \
--cc=alan@redhat.com \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.