From: Tomasz Chmielewski <mangoo@wpkg.org>
To: Linux IDE <linux-ide@vger.kernel.org>
Subject: sata_mv: hard resetting port
Date: Wed, 14 Nov 2007 10:43:39 +0100 [thread overview]
Message-ID: <473AC34B.8000709@wpkg.org> (raw)
This are the log entries I saw as I started e2fsck on a 5-disk Linux
RAID-5 array; all disks connected to a sata_mv controller:
Nov 13 18:57:33 superthecus kernel: ata6.00: exception Emask 0x1 SAct
0x0 SErr 0x100000 action 0x6 frozen
Nov 13 18:57:34 superthecus kernel: ata6.00: edma_err 0x00000084, EDMA
self-disable
Nov 13 18:57:34 superthecus kernel: ata6.00: cmd
25/00:00:bf:09:24/00:02:1c:00:00/e0 tag 0 cdb 0x0 data 262144 in
Nov 13 18:57:34 superthecus kernel: res
51/84:00:bf:09:24/84:02:1c:00:00/e0 Emask 0x10 (ATA bus error)
Nov 13 18:57:34 superthecus kernel: ata6: hard resetting port
Nov 13 18:57:34 superthecus kernel: ata6: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
Nov 13 18:57:34 superthecus kernel: ata6.00: configured for UDMA/133
Nov 13 18:57:34 superthecus kernel: ata6: EH complete
Nov 13 18:57:34 superthecus kernel: sd 5:0:0:0: [sde] 781422768 512-byte
hardware sectors (400088 MB)
Nov 13 18:57:34 superthecus kernel: sd 5:0:0:0: [sde] Write Protect is off
Nov 13 18:57:34 superthecus kernel: sd 5:0:0:0: [sde] Mode Sense: 00 3a
00 00
Nov 13 18:57:34 superthecus kernel: sd 5:0:0:0: [sde] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Nov 13 18:57:37 superthecus kernel: ata6: exception Emask 0x10 SAct 0x0
SErr 0x180000 action 0x6 frozen
Nov 13 18:57:37 superthecus kernel: ata6: edma_err 0x00000020
Nov 13 18:57:37 superthecus kernel: ata6: hard resetting port
Nov 13 18:57:37 superthecus kernel: ata6: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
Nov 13 18:57:37 superthecus kernel: ata6.00: configured for UDMA/133
Nov 13 18:57:37 superthecus kernel: ata6: EH pending after completion,
repeating EH (cnt=4)
Nov 13 18:57:37 superthecus kernel: ata6: exception Emask 0x10 SAct 0x0
SErr 0x4010000 action 0x7
Nov 13 18:57:37 superthecus kernel: ata6: edma_err 0x00000010, dev connect
Nov 13 18:57:37 superthecus kernel: ata6: hard resetting port
Nov 13 18:57:37 superthecus kernel: ata6: SATA link up 1.5 Gbps (SStatus
113 SControl 300)
Nov 13 18:57:38 superthecus kernel: ata6.00: configured for UDMA/133
Nov 13 18:57:38 superthecus kernel: ata6: EH complete
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] 781422768 512-byte
hardware sectors (400088 MB)
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Write Protect is off
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Mode Sense: 00 3a
00 00
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] 781422768 512-byte
hardware sectors (400088 MB)
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Write Protect is off
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Mode Sense: 00 3a
00 00
Nov 13 18:57:38 superthecus kernel: sd 5:0:0:0: [sde] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
That's the Marvell controller:
01:00.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
smartctl didn't show any errors.
--
Tomasz Chmielewski
http://lists.wpkg.org
next reply other threads:[~2007-11-14 9:43 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-14 9:43 Tomasz Chmielewski [this message]
2007-11-14 15:27 ` sata_mv: hard resetting port Mark Lord
2007-11-14 15:36 ` Tomasz Chmielewski
2007-11-14 16:11 ` Mark Lord
2007-11-15 3:36 ` Tejun Heo
2007-11-15 4:12 ` Mark Lord
2007-11-15 10:16 ` Tomasz Chmielewski
2007-11-15 10:26 ` Tomasz Chmielewski
2007-11-15 14:31 ` Mark Lord
2007-11-15 19:22 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=473AC34B.8000709@wpkg.org \
--to=mangoo@wpkg.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.