From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.183]) by ozlabs.org (Postfix) with ESMTP id B0BF0DDE0C for ; Thu, 15 Nov 2007 07:23:31 +1100 (EST) Message-ID: <473B5940.2090306@anagramm.de> Date: Wed, 14 Nov 2007 21:23:28 +0100 From: Clemens Koller MIME-Version: 1.0 To: robert lazarski Subject: Re: 85xx Device tree problems: e0024520:02 not found References: <473A0A1B.3020302@anagramm.de> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , robert lazarski schrieb: > I'm now running pauilis.git and 2.6.24rc2, along with a new custom > board. I still can't attach to the phy though. I know the phy works > because it works fine in u-boot. Clemens, IIRC you are using the > 88e1111 - is that with the gianfar driver? Yes, yes. (I still have to check my PHY addresses.) > I'm having problems getting > soft reboot to work with paulus.git from some reason so debugging is > slow going - might someone have some hints? I can also ACK your reboot-problem. $ shutdown -r now stops here at: Restarting system. IIRC, there were some patches some time ago changing some powerpc reboot stuff... Propably, git-bisect will be our friend. The latest working kernel over here was: Linux-2.6.21-rc5-g9a5ee4cc with ARCH=ppc I think it was also from paulus. Now I am at ARCH=powerpc. Regards, Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com