From mboxrd@z Thu Jan 1 00:00:00 1970 From: schardt Date: Thu, 15 Nov 2007 13:09:40 +0100 Subject: [U-Boot-Users] Newbie, once again Message-ID: <473C3704.5080006@fz-juelich.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, i'm still trying to run u-boot on the Xilinx4 FX12 MiniModul from Avnet. I think i'm on the wrong way.... the powerpc in the xilinx4 has 32MB DRAM (mapped at 0x0000_0000 to 0x03ff_ffff) and 4MB Flash (mapped at 0x0600_0000 to 0x063f_ffff). the integrated 16k block-ram is at 0xffff_c000 to 0xffff_ffff). the last few days i tried to load the u-boot.srec image from flash into ram with the EDK srec-bootloader, and then run u-boot from ram. but this is not the right way, or ? The only output on the uartlite is : -------- snipp ------------- U-Boot 1.3.0-rc3 (Nov 15 2007 - 11:58:50) ### No HW ID - assuming ML300 DRAM: 32 MB ------- snapp ------------ What is the better configuration ? Locate the flash on 0x0000_0000 and the dram to some other location in den adress-space ? or work on with the old configuration ? i know, i bother sometimes, this work is for my bachelor degree and i want to complete it until january regards georg ----------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------- Forschungszentrum J?lich GmbH 52425 J?lich Sitz der Gesellschaft: J?lich Eingetragen im Handelsregister des Amtsgerichts D?ren Nr. HR B 3498 Vorsitzende des Aufsichtsrats: MinDirig'in B?rbel Brumme-Bothe Gesch?ftsf?hrung: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv. Vorsitzender); Dr. Sebastian M. Schmidt ----------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------