From mboxrd@z Thu Jan  1 00:00:00 1970
From: Clemens Koller <clemens.koller@anagramm.de>
Date: Thu, 15 Nov 2007 13:38:47 +0100
Subject: [U-Boot-Users] Newbie, once again
In-Reply-To: <473C3704.5080006@fz-juelich.de>
References: <473C3704.5080006@fz-juelich.de>
Message-ID: <473C3DD7.8090102@anagramm.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

schardt schrieb:
> i'm still trying to run u-boot on the Xilinx4 FX12 MiniModul from Avnet.
> I think i'm on the wrong way....
> 
> the powerpc in the xilinx4 has 32MB DRAM (mapped at 0x0000_0000 to
> 0x03ff_ffff) and  4MB Flash (mapped at 0x0600_0000 to 0x063f_ffff). the
> integrated 16k block-ram is at 0xffff_c000 to 0xffff_ffff).
> 
> the last few days i tried to load the u-boot.srec image from flash into
> ram with the EDK srec-bootloader, and then run u-boot from ram. but this
> is not the right way, or ? The only output on the uartlite is :

http://www.denx.de/wiki/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM

Regards,

Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Stra?e 45/1
Linhof Werksgel?nde
D-81379 M?nchen
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com