From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, Rui Miguel Silva <rmfrfs@gmail.com>,
Steve Longerbeam <slongerbeam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Paul Elder <paul.elder@ideasonboard.com>,
Jacopo Mondi <jacopo@jmondi.org>,
kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH 0/6] media: imx: imx7-media-csi: Destage driver
Date: Tue, 13 Sep 2022 11:48:09 +0200 [thread overview]
Message-ID: <4740951.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20220907200424.32136-1-laurent.pinchart@ideasonboard.com>
Hello Laurent,
thanks for the patch and putting in some progress.
Am Mittwoch, 7. September 2022, 22:04:18 CEST schrieb Laurent Pinchart:
> Hello,
>
> This patch series is the last step of the imx7-media-csi driver
> destaging journey. Patch 1/6 starts by decoupling the imx7-media-csi and
> imx8mq-mipi-csi2 drivers in Kconfig, and patch 2/6 performs the
> destaging. Patches 3/6 to 6/6 then handle the low-hanging fruits of the
> staging imx cleanup by dropping features that were only used by the
> imx7-media-csi driver.
>
> The patches apply on top of [1].
>
> https://lore.kernel.org/linux-media/20220907191547.19255-1-laurent.pinchart@
> ideasonboard.com
>
> Laurent Pinchart (6):
> media: imx: Decouple imx8mq-mipi-csi2 from imx7-media-csi
> media: imx: Unstage the imx7-media-csi driver
> staging: media: imx: Drop imx_media_subdev_bound()
> staging: media: imx: Drop IMX_MEDIA_GRP_ID_CSI
> staging: media: imx: Drop unused helper functions
> staging: media: imx: Make imx_media_of_add_csi() static
>
> MAINTAINERS | 2 +-
> drivers/media/platform/nxp/Kconfig | 13 ++++
> drivers/media/platform/nxp/Makefile | 1 +
> .../platform/nxp}/imx7-media-csi.c | 24 +++++++
> drivers/staging/media/imx/Kconfig | 17 +++--
> drivers/staging/media/imx/Makefile | 3 +-
> drivers/staging/media/imx/TODO | 29 --------
> .../staging/media/imx/imx-media-dev-common.c | 14 ----
> drivers/staging/media/imx/imx-media-of.c | 5 +-
> drivers/staging/media/imx/imx-media-utils.c | 68 -------------------
> drivers/staging/media/imx/imx-media.h | 13 ----
> 11 files changed, 52 insertions(+), 137 deletions(-)
> rename drivers/{staging/media/imx => media/platform/nxp}/imx7-media-csi.c
> (97%)
I could test this on TQMa8MQ (imx8mq) based platform with an OV9281 gray
camera. I had a lot of frame drops when showing on wayland, but a
fpsdisplaysink combined with testsink showed ~36 FPS. This is the same as
before this series.
So I guess, you can add
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
prev parent reply other threads:[~2022-09-13 9:48 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-07 20:04 [PATCH 0/6] media: imx: imx7-media-csi: Destage driver Laurent Pinchart
2022-09-07 20:04 ` [PATCH 1/6] media: imx: Decouple imx8mq-mipi-csi2 from imx7-media-csi Laurent Pinchart
2022-09-08 3:58 ` paul.elder
2022-09-09 18:22 ` Laurent Pinchart
2022-09-13 15:10 ` Martin Kepplinger
2022-09-13 15:26 ` Laurent Pinchart
2022-09-07 20:04 ` [PATCH 2/6] media: imx: Unstage the imx7-media-csi driver Laurent Pinchart
2022-09-08 4:04 ` paul.elder
2022-09-08 15:06 ` Rui Miguel Silva
2022-09-08 15:18 ` Laurent Pinchart
2022-09-08 15:46 ` Rui Miguel Silva
2022-09-07 20:04 ` [PATCH 3/6] staging: media: imx: Drop imx_media_subdev_bound() Laurent Pinchart
2022-09-08 4:08 ` paul.elder
2022-09-07 20:04 ` [PATCH 4/6] staging: media: imx: Drop IMX_MEDIA_GRP_ID_CSI Laurent Pinchart
2022-09-08 4:10 ` paul.elder
2022-09-07 20:04 ` [PATCH 5/6] staging: media: imx: Drop unused helper functions Laurent Pinchart
2022-09-08 4:12 ` paul.elder
2022-09-07 20:04 ` [PATCH 6/6] staging: media: imx: Make imx_media_of_add_csi() static Laurent Pinchart
2022-09-08 4:16 ` paul.elder
2022-09-13 9:48 ` Alexander Stein [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4740951.GXAFRqVoOG@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=jacopo@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-imx@nxp.com \
--cc=linux-media@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=paul.elder@ideasonboard.com \
--cc=rmfrfs@gmail.com \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.