From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from moutng.kundenserver.de (moutng.kundenserver.de [212.227.126.186]) by ozlabs.org (Postfix) with ESMTP id AAEC3DDDF5 for ; Tue, 20 Nov 2007 23:18:00 +1100 (EST) Message-ID: <4742D079.6060307@anagramm.de> Date: Tue, 20 Nov 2007 13:18:01 +0100 From: Clemens Koller MIME-Version: 1.0 To: Wolfgang Denk Subject: Re: Problem with uboot on lite5200 References: <20071119211347.575522479C@gemini.denx.de> In-Reply-To: <20071119211347.575522479C@gemini.denx.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Cc: Leo Hendrawan , linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, Wolfgang! Wolfgang Denk schrieb: > In message <47403C73.9040506@anagramm.de> you wrote: >> How should people get a glue what's current, when in the section >> "Latest News" at http://sourceforge.net/projects/u-boot/ the people >> still find a more or less official looking "u-boot-1.1.5" release. > > Maybe by reading the very first two lines on the SF page: > > ... > NOTE: current source code is available from DENX git > repository and FTP server; see http://www.denx.de/en/Software/GIT I tried to convince you to point them to the releases... and _not_ to any repository. > The problem is that you cannot really "shut down" a SourceForge > project (please correct me if I'm wrong). I don't like SourceForge for some reasons... now, if that's true, I got one more. But anyway, there should be a way to update the "Latest News"... in a way it points to current stuff. >>> Current U-Boot is 1.3.0-rc4. Please wake up. >> Well... maybe it's better to remove all references to the old >> releases at sourceforge and point them to ftp://ftp.denx.de/pub/u-boot/ > > Can you please teach me how to do that? I would expect that one of the project admins (i.e. you) is able to update the site information. You could update the SF project as you did since u-boot-0.2.0. If you don't want to continue with SF, propably an update to a "last SF version" with nothing more than an README should suffice. Well, I know you expect people to read... I'm just wondering why so many people use ancient versions. (-: > And 1.3.0 will be out in less than 2 hours from now :-) Well... that's great... thank you all! Regards, -- Clemens Koller __________________________________ R&D Imaging Devices Anagramm GmbH Rupert-Mayer-Straße 45/1 Linhof Werksgelände D-81379 München Tel.089-741518-50 Fax 089-741518-19 http://www.anagramm-technology.com