From: Izik Eidus <izike-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
To: Mike <mike-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: VM networking stops working
Date: Wed, 21 Nov 2007 23:40:26 +0200 [thread overview]
Message-ID: <4744A5CA.8050604@qumranet.com> (raw)
In-Reply-To: <4744A5E5.9060902-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
Mike wrote:
> Izik Eidus schrieb:
>
>> Mike wrote:
>>
>>> Hello,
>>> I have a problem with my virtual machines. I am using kvm53
>>> on an AMD Athlon(tm) 64 X2 Dual Core Processor 5000+.
>>> As distribution I use Ubuntu server 7.10.
>>> As kernel I use Linux 2.6.22-14-server #1 SMP Sun Oct 14 22:09:15 GMT
>>> 2007 x86_64 GNU/Linux.
>>>
>>> I have 3 different vms running. At the beginning they all work
>>> without a problem.
>>> Then, after one moment to another one or more stop working.
>>> I did a ping test to all the machines, the vm with the failure stops
>>> pinging.
>>> The result from external ping: Destination host unreachable.
>>> The same result from a ping onto the main server.
>>>
>>> Here are my configuration files:
>>> cat /etc/qemu-ifup
>>> #!/bin/sh
>>> /sbin/ifconfig $1 0.0.0.0 promisc up
>>> /usr/sbin/brctl addif br0 $1
>>> sleep 2
>>> ------------------------------------------------------------------------
>>> cat /etc/network/interfaces
>>> auto lo
>>> iface lo inet loopback
>>>
>>> auto br0
>>> iface br0 inet static
>>> address 195.24.77.169
>>> netmask 255.255.255.0
>>> gateway 195.24.77.1
>>> bridge_ports eth0
>>> bridge_stp off
>>> bridge_maxwait 5
>>> ------------------------------------------------------------------------
>>> I use scripts for starting the vms:
>>> kvm -hda apache.img -hdb apache_storage.img -m 512 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:01 -net tap -nographic -daemonize
>>> kvm -hda postfix.img -m 512 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:12 -net tap -nographic -daemonize
>>> kvm -hda openvpn.img -m 256 -boot c -net
>>> nic,vlan=0,macaddr=00:16:3e:00:00:03 -net tap -nographic -daemonize
>>> ------------------------------------------------------------------------
>>> The tapN devices are being created at the startup of the vms.
>>>
>>> When I run dmesg I have this:
>>> [ 112.390943] br0: port 2(tap1) entering learning state
>>> [ 112.391919] br0: port 3(tap0) entering learning state
>>> [ 112.397605] br0: port 4(tap2) entering learning state
>>> [ 122.674313] tap0: no IPv6 routers present
>>> [ 122.729185] tap1: no IPv6 routers present
>>> [ 122.843901] tap2: no IPv6 routers present
>>> [ 123.336081] kvm: emulating exchange as write
>>> [ 127.367940] br0: topology change detected, propagating
>>> [ 127.367949] br0: port 4(tap2) entering forwarding state
>>> [ 127.362971] br0: topology change detected, propagating
>>> [ 127.362977] br0: port 2(tap1) entering forwarding state
>>> [ 127.362978] br0: topology change detected, propagating
>>> [ 127.362980] br0: port 3(tap0) entering forwarding state
>>>
>>> No indication of a problem, nowhere in the log files.
>>>
>>> I don't know if the vms are freezing, or the network forwarding stops
>>> working.
>>> I also activated "net.ipv4.conf.default.forwarding=1"
>>>
>>> I googled days for that problem, but without a result.
>>> I hope that maybe you have a solution for this problem. That would be
>>> great, because I prefer using kvm instead of other virtualization
>>> systems.
>>>
>>> Thank you very much in advance,
>>> Greetings from Luxembourg.
>>>
>>> Have a nice day,
>>> Mike
>>>
>> it might be not the network that die, but the whole vm
>> can you run the vms with -vnc ? (first vm -vnc :1 secoend vm -vnc :2
>> third vm -vnc :3)
>> and try to connect to them with vncviewer and see if they are alive?
>>
>>
> Thank you for your reply.
> I can't connect to the vm if it has died, even with vnc. I tried this
> already, no reply from the host.
> I don't have physical access to the server because its located in a dc.
> Only ssh to the host.
>
ok this mean there is bug in kvm for amd and it not realted to the network
what is the guest that you use? is it 64/32?
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
next prev parent reply other threads:[~2007-11-21 21:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-21 20:52 VM networking stops working Mike
[not found] ` <47449A93.5090007-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:22 ` Izik Eidus
[not found] ` <4744A18D.2050705-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 21:40 ` Mike
[not found] ` <4744A5E5.9060902-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:40 ` Izik Eidus [this message]
[not found] ` <4744A5CA.8050604-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 21:53 ` Mike
[not found] ` <4744A8CA.5070702-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 21:52 ` Izik Eidus
[not found] ` <4744A881.1060201-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 22:06 ` Mike
[not found] ` <4744ABD8.8020409-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org>
2007-11-21 22:05 ` Izik Eidus
[not found] ` <4744ABBC.30708-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-21 22:15 ` Mike
2007-11-21 22:32 ` Mike
2007-11-21 22:09 ` Lynn Kerby
[not found] ` <E729CB4A-EA27-46BD-A54D-47D87117DE90-br2HoPxSX4msTnJN9+BGXg@public.gmane.org>
2007-11-22 10:51 ` Mike
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4744A5CA.8050604@qumranet.com \
--to=izike-atkuwr5tajbwk0htik3j/w@public.gmane.org \
--cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=mike-kcIQ9yavhvsV/sYkb9DZNQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.