All of lore.kernel.org
 help / color / mirror / Atom feed
From: Avi Kivity <avi-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
To: Guillaume Thouvenin
	<guillaume.thouvenin-Z51IpKcfGtLk1uMJSBkQmQ@public.gmane.org>
Cc: "kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org"
	<kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: [patch 2 of 2] Emulate CMPS instruction
Date: Fri, 23 Nov 2007 19:54:46 +0200	[thread overview]
Message-ID: <474713E6.10507@qumranet.com> (raw)
In-Reply-To: <20071123135743.288070e8-okVqAf2pJUEUMgAS9GT5UVaPQRlvutdw@public.gmane.org>

Guillaume Thouvenin wrote:
> This patch emulates the CMPS instruction.
>
> Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin-Z51IpKcfGtLk1uMJSBkQmQ@public.gmane.org>
> ---
>
>  drivers/kvm/x86_emulate.c |   54 +++++++++++++++++++++++++++++++++++++++++++--
>  1 files changed, 52 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/kvm/x86_emulate.c b/drivers/kvm/x86_emulate.c
> index cee60eb..db744cf 100644
> --- a/drivers/kvm/x86_emulate.c
> +++ b/drivers/kvm/x86_emulate.c
> @@ -445,6 +445,29 @@ static u16 twobyte_table[256] = {
>  		register_address_increment(c->eip, rel);		\
>  	} while (0)
>  
> +/* Test if the repeat string operation prefix is REPE/REPZ or
> + * REPNE/REPNZ and if it's the case it tests the corresponding
> + * termination condition according to:
> + *     - if REPE/REPZ and ZF = 0 then done
> + *     - if REPNE/REPNZ and ZF = 1 then done
> + */
> +#define handle_rep_prefix(c)                                            \
> +	do {								\
> +		if ((c->b == 0xa6) || (c->b == 0xa7) ||			\
> +				(c->b == 0xae) || (c->b == 0xaf)) {	\
> +			if ((c->rep_prefix == REPE_PREFIX) &&		\
> +				((ctxt->eflags & EFLG_ZF) == 0)) {	\
> +				ctxt->vcpu->rip = c->eip;		\
> +				goto done;				\
> +			}						\
> +			if ((c->rep_prefix == REPNE_PREFIX) &&		\
> +				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {\
> +				ctxt->vcpu->rip = c->eip;		\
> +				goto done;				\
> +			}						\
> +		}							\
> +	} while (0)
> +
>   

No new macros in the emulator please. Just inline it at the callsite.

>  static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
>  			      struct x86_emulate_ops *ops,
>  			      unsigned long linear, u8 *dest)
> @@ -1540,10 +1563,15 @@ special_insn:
>  		break;
>  	}
>  	if (c->rep_prefix) {
> +		/* All REP prefixes have the same first termination condition */
>  		if (c->regs[VCPU_REGS_RCX] == 0) {
>  			ctxt->vcpu->rip = c->eip;
>  			goto done;
>  		}
> +		/* The second termination condition only applies for REPE
> +		 * and REPNE. handle_rep_prefix() macro deals with that. 
> +		 */
> +		handle_rep_prefix(c);
>  		c->regs[VCPU_REGS_RCX]--;
>  		c->eip = ctxt->vcpu->rip;
>  	}
> @@ -1570,8 +1598,30 @@ special_insn:
>  							   : c->dst.bytes);
>  		break;
>  	case 0xa6 ... 0xa7:	/* cmps */
> -		DPRINTF("Urk! I don't handle CMPS.\n");
> -		goto cannot_emulate;
> +		c->src.type = OP_NONE;
>   

Shouldn't this be OP_MEM?

> +		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
> +		c->src.ptr = (unsigned long *)register_address(
> +						   ctxt->ds_base,
> +						   c->regs[VCPU_REGS_RDI]);
> +
> +		c->dst.type = OP_NONE;
>   

And here?

> +		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
> +		c->dst.ptr = (unsigned long *)register_address(
> +						   ctxt->es_base,
> +						   c->regs[VCPU_REGS_RSI]);
> +
> +		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
> +		
>   

Where is the actual memory access?

> +		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
> +
> +		register_address_increment(c->regs[VCPU_REGS_RDI],
> +				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
> +				       			  : c->dst.bytes);
> +
> +		register_address_increment(c->regs[VCPU_REGS_RSI],
> +				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
> +				       			  : c->dst.bytes);
> +		break;
>  	case 0xaa ... 0xab:	/* stos */
>  		c->dst.type = OP_MEM;
>  		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> kvm-devel mailing list
> kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/kvm-devel
>   


-- 
Any sufficiently difficult bug is indistinguishable from a feature.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

  parent reply	other threads:[~2007-11-23 17:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-11-23 12:53 [patch 0 of 2] Emulate CMPS instruction Guillaume Thouvenin
     [not found] ` <20071123135332.514d46e7-okVqAf2pJUEUMgAS9GT5UVaPQRlvutdw@public.gmane.org>
2007-11-23 12:56   ` [patch 1 of 2] Rename REP prefixes Guillaume Thouvenin
2007-11-23 12:57   ` [patch 2 of 2] Emulate CMPS instruction Guillaume Thouvenin
     [not found]     ` <20071123135743.288070e8-okVqAf2pJUEUMgAS9GT5UVaPQRlvutdw@public.gmane.org>
2007-11-23 17:54       ` Avi Kivity [this message]
     [not found]         ` <474713E6.10507-atKUWr5tajBWk0Htik3J/w@public.gmane.org>
2007-11-26  9:58           ` Guillaume Thouvenin
2007-11-26 12:49           ` [patch 2 of 2][rewritten] " Guillaume Thouvenin
     [not found]             ` <20071126134909.5fe49ad6-okVqAf2pJUEUMgAS9GT5UVaPQRlvutdw@public.gmane.org>
2007-11-26 15:13               ` Avi Kivity

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=474713E6.10507@qumranet.com \
    --to=avi-atkuwr5tajbwk0htik3j/w@public.gmane.org \
    --cc=guillaume.thouvenin-Z51IpKcfGtLk1uMJSBkQmQ@public.gmane.org \
    --cc=kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.