From: "Jan Beulich" <jbeulich@novell.com>
To: "Gary Hade" <garyhade@us.ibm.com>
Cc: <gregkh@suse.de>, <lcm@us.ibm.com>, <linux-kernel@vger.kernel.org>
Subject: Re: Avoid creating P2P prefetch window for expansion ROMs
Date: Tue, 27 Nov 2007 09:28:25 +0000 [thread overview]
Message-ID: <474BF149.76E4.0078.0@novell.com> (raw)
In-Reply-To: <20071126215953.GA23277@us.ibm.com>
[-- Attachment #1: Type: text/plain, Size: 1598 bytes --]
>A kernel without the patch always forced creation of a prefetch
>window for expansion ROMs which was incorrect on systems where
>insufficient memory resources are available for both non-prefetch
>and prefetch windows. On the systems I was dealing with, the
>BIOS assumes (correctly, I believe) that expansion ROM memory
>resource needs will be satisfied from the non-prefetch window.
Why would ROM space generally need to be non-prefetchable? I can
see that special cases might require this, but as long as ROM space
really is just normal code and data, there's nothing wrong with
prefetching from it I would think. Of course I realize there's no way
to specify that on a per-device basis, so I think the BIOS must be
relied upon here.
>I think it would still be useful to know what system/PCI adapter
>combination you are seeing the problem with so that I can try
>to put together a setup that will reproduce the problem here.
>Alternatively, it would good if you wouldn't mind providing
>more information, testing possible fixes, etc. As a start,
>could you send me the following taken with and without the
>patch?
> - /proc/iomem
> - /proc/ioports
> - `dmesg` output
> - `lspci -vt` output
> - `lspci -vvv` output
Attached. *.0 is with the patch, *.1 is with it reverted. All output from
the SLE10SP2 (2.6.16.54-based) kernel that has that patch backported.
I'd also like to note that I found that a second of the systems I'm
regularly dealing with also has similar problems. I'm just not normally
looking at the boot messages that closely.
Jan
[-- Attachment #2: lspci-vvv.1 --]
[-- Type: application/octet-stream, Size: 44808 bytes --]
00:00.0 Host bridge: Intel Corporation E8500/E8501 Hub Interface 1.5 (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port D (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ae500000-b04fffff
Prefetchable memory behind bridge: 0000000098000000-000000009bffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40b9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 3, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x8 Port C (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: ac500000-ae4fffff
Prefetchable memory behind bridge: 000000009c000000-000000009fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 2
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 1, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port C1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 3
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:04.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: aa500000-ac4fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 4
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 4, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:05.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8500000-aa4fffff
Prefetchable memory behind bridge: 00000000a4000000-00000000a7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 5
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 5, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:06.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a84fffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e1
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 6
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:07.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a82fffff
Prefetchable memory behind bridge: 0000000080100000-00000000802fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 7
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:08.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0a.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0c.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0e.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation E8500/E8501 FSB Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.1 Host bridge: Intel Corporation E8500/E8501 Address Mapping Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.2 Host bridge: Intel Corporation E8500/E8501 RAS Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.2 Host bridge: Intel Corporation E8500/E8501 Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.2 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.3 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.4 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.5 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.6 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.7 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 4: I/O ports at 8060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 4: I/O ports at 8040 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 66
Region 4: I/O ports at 8020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 106
Region 0: Memory at b0500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a8000000-a80fffff
Prefetchable memory behind bridge: 90000000-97ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 8080 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8000 [size=32]
0a:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at a8400000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=48
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [78] #0c [0009]
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=0a:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0a:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0a:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0c:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at a8300000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: ddff49f7d06e6df8 Data: ad6f
0c:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 98
Region 0: Memory at a8310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 9ecc10f2c2609318 Data: 2c68
0d:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: 0000000080100000-00000000802fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0d:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0f, subordinate=0f, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0e:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at 3100 [size=256]
Region 1: Memory at a8100000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8110000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
0e:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 82
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at a8120000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8130000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at 80200000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
10:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at a8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #3: dmesg.1 --]
[-- Type: application/octet-stream, Size: 35319 bytes --]
Bootdata ok (command line is root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume)
Linux version 2.6.16.54-2007-11-14-jb (jbeulich@dus-dev-sles10t) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #2 SMP Tue Nov 27 10:11:03 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f89c000 (usable)
BIOS-e820: 000000007f89c000 - 000000007f912000 (reserved)
BIOS-e820: 000000007f912000 - 000000007f939000 (usable)
BIOS-e820: 000000007f939000 - 000000007f93a000 (reserved)
BIOS-e820: 000000007f93a000 - 000000007f944000 (usable)
BIOS-e820: 000000007f944000 - 000000007f977000 (reserved)
BIOS-e820: 000000007f977000 - 000000007f9f8000 (ACPI NVS)
BIOS-e820: 000000007f9f8000 - 000000007fa12000 (reserved)
BIOS-e820: 000000007fa12000 - 000000007fa6b000 (usable)
BIOS-e820: 000000007fa6b000 - 000000007fa92000 (reserved)
BIOS-e820: 000000007fa92000 - 000000007fb06000 (usable)
BIOS-e820: 000000007fb06000 - 000000007fb12000 (ACPI NVS)
BIOS-e820: 000000007fb12000 - 000000007fb18000 (usable)
BIOS-e820: 000000007fb18000 - 000000007fb32000 (ACPI data)
BIOS-e820: 000000007fb32000 - 000000007fb33000 (reserved)
BIOS-e820: 000000007fb33000 - 000000007fb7a000 (usable)
BIOS-e820: 000000007fb7a000 - 000000007fbfa000 (reserved)
BIOS-e820: 000000007fbfa000 - 000000007fc00000 (usable)
BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03d0
ACPI: XSDT (v001 INTEL SHW40M 0x00000002 MSFT 0x01000013) @ 0x000000007fb31f30
ACPI: FADT (v003 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fd90
ACPI: MADT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fc10
ACPI: SRAT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f90
ACPI: MCFG (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f10
ACPI: SPCR (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20e90
ACPI: SSDT (v001 INTEL SHW40M 0x00004000 INTL 0x20030918) @ 0x000000007fb1e010
ACPI: SSDT (v001 INTEL SHW40M 0x00004004 INTL 0x20030918) @ 0x000000007fb1c010
ACPI: SSDT (v001 INTEL SHW40M 0x00004008 INTL 0x20030918) @ 0x000000007fb1a010
ACPI: SSDT (v001 INTEL SHW40M 0x0000400c INTL 0x20030918) @ 0x000000007fb18010
ACPI: DSDT (v001 INTEL SHW40M 0x00000002 INTL 0x20030918) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000280000000
Bootmem setup node 0 0000000000000000-0000000280000000
On node 0 totalpages: 2058801
DMA zone: 3084 pages, LIFO batch:0
DMA32 zone: 504357 pages, LIFO batch:31
Normal zone: 1551360 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
Processor #8 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
Processor #14 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0a] enabled)
Processor #10 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
Processor #12 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x09] enabled)
Processor #9 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0f] enabled)
Processor #15 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0b] enabled)
Processor #11 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
Processor #13 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec85000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec85000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec85800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec85800, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec86000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec86000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec86800] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec86800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7fc00000:803a0000)
Built 1 zonelists
Kernel command line: root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3391.587 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1d14000 - 0x5d14000
Nosave address range: 000000000009f000 - 0000000000100000
Nosave address range: 000000007f89c000 - 000000007f912000
Nosave address range: 000000007f939000 - 000000007f93a000
Nosave address range: 000000007f944000 - 000000007f977000
Nosave address range: 000000007f977000 - 000000007f9f8000
Nosave address range: 000000007f9f8000 - 000000007fa12000
Nosave address range: 000000007fa6b000 - 000000007fa92000
Nosave address range: 000000007fb06000 - 000000007fb12000
Nosave address range: 000000007fb18000 - 000000007fb32000
Nosave address range: 000000007fb32000 - 000000007fb33000
Nosave address range: 000000007fb7a000 - 000000007fbfa000
Nosave address range: 000000007fc00000 - 00000000fffa0000
Nosave address range: 00000000fffa0000 - 00000000fffac000
Nosave address range: 00000000fffac000 - 0000000100000000
Memory: 8152836k/10485760k available (1776k kernel code, 229164k reserved, 742k data, 196k init)
Calibrating delay using timer specific routine.. 6797.38 BogoMIPS (lpj=13594760)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
checking if image is initramfs... it is
Freeing initrd memory: 3009k freed
not found!
Using local APIC timer interrupts.
result 12469029
Detected 12.469 MHz APIC timer.
Booting processor 1/16 APIC 0x8
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.57 BogoMIPS (lpj=13567147)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 2/16 APIC 0xe
Initializing CPU#2
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567433)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 3/16 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567366)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 4/16 APIC 0xa
Initializing CPU#4
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567366)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 5/16 APIC 0xc
Initializing CPU#5
Calibrating delay using timer specific routine.. 6783.70 BogoMIPS (lpj=13567409)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU5: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 6/16 APIC 0x2
Initializing CPU#6
Calibrating delay using timer specific routine.. 6783.47 BogoMIPS (lpj=13566958)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU6: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 7/16 APIC 0x4
Initializing CPU#7
Calibrating delay using timer specific routine.. 6783.65 BogoMIPS (lpj=13567300)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU7: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 8/16 APIC 0x9
Initializing CPU#8
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567370)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 9/16 APIC 0xf
Initializing CPU#9
Calibrating delay using timer specific routine.. 6783.66 BogoMIPS (lpj=13567337)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 10/16 APIC 0x1
Initializing CPU#10
Calibrating delay using timer specific routine.. 6783.85 BogoMIPS (lpj=13567711)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU10: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 11/16 APIC 0x7
Initializing CPU#11
Calibrating delay using timer specific routine.. 6783.69 BogoMIPS (lpj=13567397)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU11: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 12/16 APIC 0xb
Initializing CPU#12
Calibrating delay using timer specific routine.. 6783.67 BogoMIPS (lpj=13567358)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU12: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 13/16 APIC 0xd
Initializing CPU#13
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567420)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU13: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 14/16 APIC 0x3
Initializing CPU#14
Calibrating delay using timer specific routine.. 6783.51 BogoMIPS (lpj=13567028)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU14: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 15/16 APIC 0x5
Initializing CPU#15
Calibrating delay using timer specific routine.. 6783.72 BogoMIPS (lpj=13567448)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU15: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Brought up 16 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
migration_cost=77,9706
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NTF_ (name not of form _Lxx or _Exx) [20060127]
ACPI Error (evgpeblk-0284): Unknown GPE method type: PNTS (name not of form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [TNB] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:10:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHB._PRT]
ACPI: Device [M1] status [0000000c]: functional but not present; setting present
ACPI: Device [M2] status [0000000c]: functional but not present; setting present
ACPI: Device [M3] status [0000000c]: functional but not present; setting present
ACPI: Device [M4] status [0000000c]: functional but not present; setting present
ACPI: Device [M5] status [0000000c]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: ae500000-b04fffff
PREFETCH window: 98000000-9bffffff
PCI: Bridge: 0000:00:02.0
IO window: 6000-6fff
MEM window: ac500000-ae4fffff
PREFETCH window: 9c000000-9fffffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: 5000-5fff
MEM window: aa500000-ac4fffff
PREFETCH window: a0000000-a3ffffff
PCI: Bridge: 0000:00:05.0
IO window: 4000-4fff
MEM window: a8500000-aa4fffff
PREFETCH window: a4000000-a7ffffff
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:00.2
IO window: disabled.
MEM window: a8300000-a83fffff
PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: a8300000-a84fffff
PREFETCH window: 80000000-800fffff
PCI: Bridge: 0000:0d:00.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: 80100000-802fffff
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: 3000-3fff
MEM window: a8100000-a82fffff
PREFETCH window: 80100000-802fffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: a8000000-a80fffff
PREFETCH window: 90000000-97ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:0a:00.0 to 64
PCI: Setting latency timer of device 0000:0a:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie02]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0x90000000, mapped to 0xffffc20000080000, using 5120k, total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 330k
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
GSI 17 sharing vector 0x32 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00008060
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 18 sharing vector 0x3A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 58, io base 0x00008040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x42 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 66, io base 0x00008020
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: new device found, idVendor=0424, idProduct=a700
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
Fusion MPT base driver 3.04.06-suse
Copyright (c) 1999-2007 LSI Corporation
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
Fusion MPT SPI Host driver 3.04.06-suse
GSI 20 sharing vector 0x4A and IRQ 20
ACPI: PCI Interrupt 0000:0e:05.0[A] -> GSI 72 (level, low) -> IRQ 74
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=74
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: asynchronous
0:0:6:0: Attached scsi generic sg1 type 3
GSI 21 sharing vector 0x52 and IRQ 21
ACPI: PCI Interrupt 0000:0e:05.1[B] -> GSI 73 (level, low) -> IRQ 82
Losing some ticks... checking if CPU frequency changed.
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=82
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target1:0:6: Beginning Domain Validation
target1:0:6: Ending Domain Validation
target1:0:6: asynchronous
1:0:6:0: Attached scsi generic sg2 type 3
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target1:0:10: Beginning Domain Validation
target1:0:10: Ending Domain Validation
target1:0:10: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 sdb2
sd 1:0:10:0: Attached scsi disk sdb
sd 1:0:10:0: Attached scsi generic sg3 type 0
usbcore: registered new driver hiddev
input: ATEN ATEN CS-1758/54 as /class/input/input1
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input2
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
/home/jbeulich/cpp/kernel/sle10sp2-2007-11-14/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x8080 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
scsi2 : ata_piix
ata1.00: ATAPI, max UDMA/33
ata1.00: configured for UDMA/33
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0x177
Vendor: QSI Model: DVD-ROM SDR-083 Rev: MX13
Type: CD-ROM ANSI SCSI revision: 05
2:0:0:0: Attached scsi generic sg4 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
Adding 4200956k swap on /dev/sdb1. Priority:-1 extents:1 across:4200956k
Fusion MPT misc device (ioctl) driver 3.04.06-suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
tg3.c:v3.71b (December 15, 2006)
GSI 22 sharing vector 0x5A and IRQ 22
ACPI: PCI Interrupt 0000:0c:02.0[A] -> GSI 48 (level, low) -> IRQ 90
hw_random: RNG not detected
eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:45
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 23 sharing vector 0x62 and IRQ 23
ACPI: PCI Interrupt 0000:0c:02.1[B] -> GSI 49 (level, low) -> IRQ 98
GSI 24 sharing vector 0x6A and IRQ 24
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 106
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:46
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 106, io mem 0xb0500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb 2-1: USB disconnect, address 2
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.54-2007-11-14-jb ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 3-1: USB disconnect, address 2
shpchp: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
shpchp: Can't get msi for the hotplug controller
shpchp: Use INTx for the hotplug controller
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 4-3: new high speed USB device using ehci_hcd and address 2
eth1 renamed to eth2
eth0 renamed to eth3
usb 4-3: new device found, idVendor=0424, idProduct=a700
usb 4-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
input: ATEN ATEN CS-1758/54 as /class/input/input3
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input4
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
loop: loaded (max 8 devices)
ReiserFS: sda9: found reiserfs format "3.6" with standard journal
ReiserFS: sda9: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda9: checking transaction log (sda9)
ReiserFS: sda9: Using r5 hash to sort names
ReiserFS: sda10: found reiserfs format "3.6" with standard journal
ReiserFS: sda10: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda10: checking transaction log (sda10)
ReiserFS: sda10: Using r5 hash to sort names
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ACPI: Power Button (FF) [PWRF]
tg3: eth3: Link is up at 100 Mbps, half duplex.
tg3: eth3: Flow control is off for TX and off for RX.
IA-32 Microcode Update Driver: v1.14b <tigran@veritas.com>
IA-32 Microcode Update Driver v1.14b unregistered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6 over IPv4 tunneling driver
acpi-cpufreq: CPU0 - ACPI performance management activated.
acpi-cpufreq: CPU1 - ACPI performance management activated.
acpi-cpufreq: CPU2 - ACPI performance management activated.
acpi-cpufreq: CPU3 - ACPI performance management activated.
acpi-cpufreq: CPU4 - ACPI performance management activated.
acpi-cpufreq: CPU5 - ACPI performance management activated.
acpi-cpufreq: CPU6 - ACPI performance management activated.
acpi-cpufreq: CPU7 - ACPI performance management activated.
acpi-cpufreq: CPU8 - ACPI performance management activated.
acpi-cpufreq: CPU9 - ACPI performance management activated.
acpi-cpufreq: CPU10 - ACPI performance management activated.
acpi-cpufreq: CPU11 - ACPI performance management activated.
acpi-cpufreq: CPU12 - ACPI performance management activated.
acpi-cpufreq: CPU13 - ACPI performance management activated.
acpi-cpufreq: CPU14 - ACPI performance management activated.
acpi-cpufreq: CPU15 - ACPI performance management activated.
eth3: no IPv6 routers present
[-- Attachment #4: iomem.0 --]
[-- Type: application/octet-stream, Size: 1934 bytes --]
00000000-0009efff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000cafff : Video ROM
000cb000-000cefff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7f89bfff : System RAM
00100000-002bc1e6 : Kernel code
002bc1e7-00375d57 : Kernel data
7f89c000-7f911fff : reserved
7f912000-7f938fff : System RAM
7f939000-7f939fff : reserved
7f93a000-7f943fff : System RAM
7f944000-7f976fff : reserved
7f977000-7f9f7fff : ACPI Non-volatile Storage
7f9f8000-7fa11fff : reserved
7fa12000-7fa6afff : System RAM
7fa6b000-7fa91fff : reserved
7fa92000-7fb05fff : System RAM
7fb06000-7fb11fff : ACPI Non-volatile Storage
7fb12000-7fb17fff : System RAM
7fb18000-7fb31fff : ACPI Tables
7fb32000-7fb32fff : reserved
7fb33000-7fb79fff : System RAM
7fb7a000-7fbf9fff : reserved
7fbfa000-7fbfffff : System RAM
90000000-97ffffff : PCI Bus #10
90000000-97ffffff : 0000:10:00.0
90000000-90ffffff : vesafb
98000000-9bffffff : PCI Bus #01
9c000000-9fffffff : PCI Bus #03
a0000000-a3ffffff : PCI Bus #06
a4000000-a7ffffff : PCI Bus #08
a8000000-a80fffff : PCI Bus #10
a8000000-a800ffff : 0000:10:00.0
a8100000-a82fffff : PCI Bus #0d
a8100000-a81fffff : PCI Bus #0e
a8100000-a810ffff : 0000:0e:05.0
a8110000-a811ffff : 0000:0e:05.0
a8120000-a812ffff : 0000:0e:05.1
a8130000-a813ffff : 0000:0e:05.1
a8300000-a84fffff : PCI Bus #0a
a8300000-a83fffff : PCI Bus #0c
a8300000-a830ffff : 0000:0c:02.0
a8300000-a830ffff : tg3
a8310000-a831ffff : 0000:0c:02.1
a8310000-a831ffff : tg3
a8320000-a833ffff : 0000:0c:02.0
a8400000-a8400fff : 0000:0a:00.0
a8400000-a8400027 : shpchp
a8500000-aa4fffff : PCI Bus #08
aa500000-ac4fffff : PCI Bus #06
ac500000-ae4fffff : PCI Bus #03
ae500000-b04fffff : PCI Bus #01
b0500000-b05003ff : 0000:00:1d.7
b0500000-b05003ff : ehci_hcd
fffa0000-fffabfff : reserved
fffe0000-ffffffff : 0000:10:00.0
100000000-27fffffff : System RAM
[-- Attachment #5: iomem.1 --]
[-- Type: application/octet-stream, Size: 2140 bytes --]
00000000-0009efff : System RAM
00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000cafff : Video ROM
000cb000-000cefff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7f89bfff : System RAM
00100000-002bc1e6 : Kernel code
002bc1e7-00375d57 : Kernel data
7f89c000-7f911fff : reserved
7f912000-7f938fff : System RAM
7f939000-7f939fff : reserved
7f93a000-7f943fff : System RAM
7f944000-7f976fff : reserved
7f977000-7f9f7fff : ACPI Non-volatile Storage
7f9f8000-7fa11fff : reserved
7fa12000-7fa6afff : System RAM
7fa6b000-7fa91fff : reserved
7fa92000-7fb05fff : System RAM
7fb06000-7fb11fff : ACPI Non-volatile Storage
7fb12000-7fb17fff : System RAM
7fb18000-7fb31fff : ACPI Tables
7fb32000-7fb32fff : reserved
7fb33000-7fb79fff : System RAM
7fb7a000-7fbf9fff : reserved
7fbfa000-7fbfffff : System RAM
80000000-800fffff : PCI Bus #0a
80000000-800fffff : PCI Bus #0c
80000000-8001ffff : 0000:0c:02.0
80100000-802fffff : PCI Bus #0d
80100000-802fffff : PCI Bus #0e
80100000-801fffff : 0000:0e:05.0
80200000-802fffff : 0000:0e:05.1
90000000-97ffffff : PCI Bus #10
90000000-97ffffff : 0000:10:00.0
90000000-90ffffff : vesafb
98000000-9bffffff : PCI Bus #01
9c000000-9fffffff : PCI Bus #03
a0000000-a3ffffff : PCI Bus #06
a4000000-a7ffffff : PCI Bus #08
a8000000-a80fffff : PCI Bus #10
a8000000-a800ffff : 0000:10:00.0
a8100000-a82fffff : PCI Bus #0d
a8100000-a81fffff : PCI Bus #0e
a8100000-a810ffff : 0000:0e:05.0
a8110000-a811ffff : 0000:0e:05.0
a8120000-a812ffff : 0000:0e:05.1
a8130000-a813ffff : 0000:0e:05.1
a8300000-a84fffff : PCI Bus #0a
a8300000-a83fffff : PCI Bus #0c
a8300000-a830ffff : 0000:0c:02.0
a8300000-a830ffff : tg3
a8310000-a831ffff : 0000:0c:02.1
a8310000-a831ffff : tg3
a8400000-a8400fff : 0000:0a:00.0
a8400000-a8400027 : shpchp
a8500000-aa4fffff : PCI Bus #08
aa500000-ac4fffff : PCI Bus #06
ac500000-ae4fffff : PCI Bus #03
ae500000-b04fffff : PCI Bus #01
b0500000-b05003ff : 0000:00:1d.7
b0500000-b05003ff : ehci_hcd
fffa0000-fffabfff : reserved
fffe0000-ffffffff : 0000:10:00.0
100000000-27fffffff : System RAM
[-- Attachment #6: ioports.0 --]
[-- Type: application/octet-stream, Size: 951 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : libata
02f8-02ff : serial
03c0-03df : vesafb
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0410-0415 : ACPI CPU throttle
0428-042f : GPE0_BLK
0480-04bf : 0000:00:1f.0
0cf8-0cff : PCI conf1
2000-2fff : PCI Bus #10
2000-20ff : 0000:10:00.0
3000-3fff : PCI Bus #0d
3000-3fff : PCI Bus #0e
3000-30ff : 0000:0e:05.1
3100-31ff : 0000:0e:05.0
4000-4fff : PCI Bus #08
5000-5fff : PCI Bus #06
6000-6fff : PCI Bus #03
7000-7fff : PCI Bus #01
8000-801f : 0000:00:1f.3
8020-803f : 0000:00:1d.2
8020-803f : uhci_hcd
8040-805f : 0000:00:1d.1
8040-805f : uhci_hcd
8060-807f : 0000:00:1d.0
8060-807f : uhci_hcd
8080-808f : 0000:00:1f.2
8080-808f : libata
[-- Attachment #7: ioports.1 --]
[-- Type: application/octet-stream, Size: 951 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : libata
01f0-01f7 : libata
02f8-02ff : serial
03c0-03df : vesafb
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0410-0415 : ACPI CPU throttle
0428-042f : GPE0_BLK
0480-04bf : 0000:00:1f.0
0cf8-0cff : PCI conf1
2000-2fff : PCI Bus #10
2000-20ff : 0000:10:00.0
3000-3fff : PCI Bus #0d
3000-3fff : PCI Bus #0e
3000-30ff : 0000:0e:05.1
3100-31ff : 0000:0e:05.0
4000-4fff : PCI Bus #08
5000-5fff : PCI Bus #06
6000-6fff : PCI Bus #03
7000-7fff : PCI Bus #01
8000-801f : 0000:00:1f.3
8020-803f : 0000:00:1d.2
8020-803f : uhci_hcd
8040-805f : 0000:00:1d.1
8040-805f : uhci_hcd
8060-807f : 0000:00:1d.0
8060-807f : uhci_hcd
8080-808f : 0000:00:1f.2
8080-808f : libata
[-- Attachment #8: lspci-vt.0 --]
[-- Type: application/octet-stream, Size: 5106 bytes --]
-[0000:00]-+-00.0 Intel Corporation E8500/E8501 Hub Interface 1.5
+-01.0-[0000:01-02]--
+-02.0-[0000:03-04]--
+-03.0-[0000:05]--
+-04.0-[0000:06-07]--
+-05.0-[0000:08-09]--
+-06.0-[0000:0a-0c]--+-00.0-[0000:0b]--
| \-00.2-[0000:0c]--+-02.0 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
| \-02.1 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
+-07.0-[0000:0d-0f]--+-00.0-[0000:0e]--+-05.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| | \-05.1 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| \-00.2-[0000:0f]--
+-08.0 Intel Corporation E8500/E8501 IMI Registers
+-09.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-09.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-09.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-09.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-09.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0a.0 Intel Corporation E8500/E8501 IMI Registers
+-0b.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0b.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0b.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0b.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0b.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0c.0 Intel Corporation E8500/E8501 IMI Registers
+-0d.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0d.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0d.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0d.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0d.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0e.0 Intel Corporation E8500/E8501 IMI Registers
+-0f.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0f.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0f.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0f.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0f.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-10.0 Intel Corporation E8500/E8501 FSB Registers
+-10.1 Intel Corporation E8500/E8501 Address Mapping Registers
+-10.2 Intel Corporation E8500/E8501 RAS Registers
+-11.0 Intel Corporation E8500/E8501 Reserved Registers
+-11.1 Intel Corporation E8500/E8501 Reserved Registers
+-11.2 Intel Corporation E8500/E8501 Miscellaneous Registers
+-13.0 Intel Corporation E8500/E8501 Reserved Registers
+-13.1 Intel Corporation E8500/E8501 Reserved Registers
+-13.2 Intel Corporation E8500/E8501 Reserved Registers
+-13.3 Intel Corporation E8500/E8501 Reserved Registers
+-13.4 Intel Corporation E8500/E8501 Reserved Registers
+-13.5 Intel Corporation E8500/E8501 Reserved Registers
+-13.6 Intel Corporation E8500/E8501 Reserved Registers
+-13.7 Intel Corporation E8500/E8501 Reserved Registers
+-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
+-1e.0-[0000:10]----00.0 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
+-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
+-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller
\-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
[-- Attachment #9: lspci-vt.1 --]
[-- Type: application/octet-stream, Size: 5106 bytes --]
-[0000:00]-+-00.0 Intel Corporation E8500/E8501 Hub Interface 1.5
+-01.0-[0000:01-02]--
+-02.0-[0000:03-04]--
+-03.0-[0000:05]--
+-04.0-[0000:06-07]--
+-05.0-[0000:08-09]--
+-06.0-[0000:0a-0c]--+-00.0-[0000:0b]--
| \-00.2-[0000:0c]--+-02.0 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
| \-02.1 Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet
+-07.0-[0000:0d-0f]--+-00.0-[0000:0e]--+-05.0 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| | \-05.1 LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI
| \-00.2-[0000:0f]--
+-08.0 Intel Corporation E8500/E8501 IMI Registers
+-09.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-09.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-09.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-09.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-09.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-09.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0a.0 Intel Corporation E8500/E8501 IMI Registers
+-0b.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0b.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0b.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0b.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0b.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0b.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0c.0 Intel Corporation E8500/E8501 IMI Registers
+-0d.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0d.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0d.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0d.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0d.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0d.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0e.0 Intel Corporation E8500/E8501 IMI Registers
+-0f.0 Intel Corporation E8500/E8501 eXternal Memory Bridge
+-0f.1 Intel Corporation E8500/E8501 XMB Miscellaneous Registers
+-0f.2 Intel Corporation E8500/E8501 XMB Memory Interleaving Registers
+-0f.3 Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration
+-0f.4 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.5 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.6 Intel Corporation E8500/E8501 XMB Reserved Registers
+-0f.7 Intel Corporation E8500/E8501 XMB Reserved Registers
+-10.0 Intel Corporation E8500/E8501 FSB Registers
+-10.1 Intel Corporation E8500/E8501 Address Mapping Registers
+-10.2 Intel Corporation E8500/E8501 RAS Registers
+-11.0 Intel Corporation E8500/E8501 Reserved Registers
+-11.1 Intel Corporation E8500/E8501 Reserved Registers
+-11.2 Intel Corporation E8500/E8501 Miscellaneous Registers
+-13.0 Intel Corporation E8500/E8501 Reserved Registers
+-13.1 Intel Corporation E8500/E8501 Reserved Registers
+-13.2 Intel Corporation E8500/E8501 Reserved Registers
+-13.3 Intel Corporation E8500/E8501 Reserved Registers
+-13.4 Intel Corporation E8500/E8501 Reserved Registers
+-13.5 Intel Corporation E8500/E8501 Reserved Registers
+-13.6 Intel Corporation E8500/E8501 Reserved Registers
+-13.7 Intel Corporation E8500/E8501 Reserved Registers
+-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
+-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
+-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
+-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
+-1e.0-[0000:10]----00.0 ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
+-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
+-1f.2 Intel Corporation 82801EB (ICH5) SATA Controller
\-1f.3 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller
[-- Attachment #10: lspci-vvv.0 --]
[-- Type: application/octet-stream, Size: 44790 bytes --]
00:00.0 Host bridge: Intel Corporation E8500/E8501 Hub Interface 1.5 (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port D (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ae500000-b04fffff
Prefetchable memory behind bridge: 0000000098000000-000000009bffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40b9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 1
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 3, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x8 Port C (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: ac500000-ae4fffff
Prefetchable memory behind bridge: 000000009c000000-000000009fffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 2
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 1, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:03.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port C1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40c9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 3
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:04.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: aa500000-ac4fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000a3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d1
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 4
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 4, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:05.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port B1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: a8500000-aa4fffff
Prefetchable memory behind bridge: 00000000a4000000-00000000a7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40d9
Capabilities: [6c] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 5
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn+ PwrCtrl+ MRL- AtnInd+ PwrInd+ HotPlug+ Surpise+
Slot: Number 5, PowerLimit 0.000000
Slot: Enabled AtnBtn+ PwrFlt+ MRL+ PresDet+ CmdCplt- HPIrq+
Slot: AttnInd Off, PwrInd Off, Power+
Root: Correctable- Non-Fatal- Fatal- PME-
00:06.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A0 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0c, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a84fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e1
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 6
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:07.0 PCI bridge: Intel Corporation E8500/E8501 PCI Express x4 Port A1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0f, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a82fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/1 Enable+
Address: fee00000 Data: 40e9
Capabilities: [6c] Express Root Port (Slot-) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s unlimited, L1 unlimited
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 256 bytes, MaxReadReq 4096 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s L1, Port 7
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Root: Correctable- Non-Fatal- Fatal- PME-
00:08.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0a.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0b.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0c.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0d.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0e.0 Host bridge: Intel Corporation E8500/E8501 IMI Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.0 RAM memory: Intel Corporation E8500/E8501 eXternal Memory Bridge (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.1 RAM memory: Intel Corporation E8500/E8501 XMB Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.2 RAM memory: Intel Corporation E8500/E8501 XMB Memory Interleaving Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.3 RAM memory: Intel Corporation E8500/E8501 XMB DDR Initialization and Calibration (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.4 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.5 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.6 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:0f.7 RAM memory: Intel Corporation E8500/E8501 XMB Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.0 Host bridge: Intel Corporation E8500/E8501 FSB Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.1 Host bridge: Intel Corporation E8500/E8501 Address Mapping Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:10.2 Host bridge: Intel Corporation E8500/E8501 RAS Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:11.2 Host bridge: Intel Corporation E8500/E8501 Miscellaneous Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.0 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.1 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.2 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.3 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.4 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.5 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.6 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:13.7 Host bridge: Intel Corporation E8500/E8501 Reserved Registers (rev 11)
Subsystem: Intel Corporation Unknown device 8086
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 4: I/O ports at 8060 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 58
Region 4: I/O ports at 8040 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 66
Region 4: I/O ports at 8020 [size=32]
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 106
Region 0: Memory at b0500000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: a8000000-a80fffff
Prefetchable memory behind bridge: 90000000-97ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: I/O ports at <ignored>
Region 1: I/O ports at <ignored>
Region 2: I/O ports at <ignored>
Region 3: I/O ports at <ignored>
Region 4: I/O ports at 8080 [size=16]
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 8000 [size=32]
0a:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at a8400000 (64-bit, non-prefetchable) [size=4K]
Bus: primary=0a, secondary=0b, subordinate=0b, sec-latency=48
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [78] #0c [0009]
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
Status: Dev=0a:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0a:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0a, secondary=0c, subordinate=0c, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: a8300000-a83fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=0a:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0c:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at a8300000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at a8320000 [disabled] [size=128K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: ddff49f7d06e6df8 Data: ad6f
0c:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 98
Region 0: Memory at a8310000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=0c:02.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
Address: 9ecc10f2c2609318 Data: 2c68
0d:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0e, subordinate=0e, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: a8100000-a81fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0d:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0d, secondary=0f, subordinate=0f, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [6c] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d8] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=0d:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream: Capacity=65535 CommitmentLimit=65535
Downstream: Capacity=65535 CommitmentLimit=65535
0e:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 74
Region 0: I/O ports at 3100 [size=256]
Region 1: Memory at a8100000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8110000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
0e:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08)
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 82
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at a8120000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at a8130000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=512 OST=8
Status: Dev=0e:05.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=8 DMCRS=16 RSCEM- 266MHz- 533MHz-
10:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 3449
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 90000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at a8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fffe0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #11: dmesg.0 --]
[-- Type: application/octet-stream, Size: 35433 bytes --]
Bootdata ok (command line is root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume)
Linux version 2.6.16.54-2007-11-14-jb (jbeulich@dus-dev-sles10t) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 19 17:39:36 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f89c000 (usable)
BIOS-e820: 000000007f89c000 - 000000007f912000 (reserved)
BIOS-e820: 000000007f912000 - 000000007f939000 (usable)
BIOS-e820: 000000007f939000 - 000000007f93a000 (reserved)
BIOS-e820: 000000007f93a000 - 000000007f944000 (usable)
BIOS-e820: 000000007f944000 - 000000007f977000 (reserved)
BIOS-e820: 000000007f977000 - 000000007f9f8000 (ACPI NVS)
BIOS-e820: 000000007f9f8000 - 000000007fa12000 (reserved)
BIOS-e820: 000000007fa12000 - 000000007fa6b000 (usable)
BIOS-e820: 000000007fa6b000 - 000000007fa92000 (reserved)
BIOS-e820: 000000007fa92000 - 000000007fb06000 (usable)
BIOS-e820: 000000007fb06000 - 000000007fb12000 (ACPI NVS)
BIOS-e820: 000000007fb12000 - 000000007fb18000 (usable)
BIOS-e820: 000000007fb18000 - 000000007fb32000 (ACPI data)
BIOS-e820: 000000007fb32000 - 000000007fb33000 (reserved)
BIOS-e820: 000000007fb33000 - 000000007fb7a000 (usable)
BIOS-e820: 000000007fb7a000 - 000000007fbfa000 (reserved)
BIOS-e820: 000000007fbfa000 - 000000007fc00000 (usable)
BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved)
BIOS-e820: 0000000100000000 - 0000000280000000 (usable)
DMI 2.3 present.
ACPI: RSDP (v002 INTEL ) @ 0x00000000000f03d0
ACPI: XSDT (v001 INTEL SHW40M 0x00000002 MSFT 0x01000013) @ 0x000000007fb31f30
ACPI: FADT (v003 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fd90
ACPI: MADT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb2fc10
ACPI: SRAT (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f90
ACPI: MCFG (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20f10
ACPI: SPCR (v001 INTEL SHW40M 0x00000002 0x00000000) @ 0x000000007fb20e90
ACPI: SSDT (v001 INTEL SHW40M 0x00004000 INTL 0x20030918) @ 0x000000007fb1e010
ACPI: SSDT (v001 INTEL SHW40M 0x00004004 INTL 0x20030918) @ 0x000000007fb1c010
ACPI: SSDT (v001 INTEL SHW40M 0x00004008 INTL 0x20030918) @ 0x000000007fb1a010
ACPI: SSDT (v001 INTEL SHW40M 0x0000400c INTL 0x20030918) @ 0x000000007fb18010
ACPI: DSDT (v001 INTEL SHW40M 0x00000002 INTL 0x20030918) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000280000000
Bootmem setup node 0 0000000000000000-0000000280000000
On node 0 totalpages: 2058801
DMA zone: 3084 pages, LIFO batch:0
DMA32 zone: 504357 pages, LIFO batch:31
Normal zone: 1551360 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x08] enabled)
Processor #8 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x0e] enabled)
Processor #14 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x0a] enabled)
Processor #10 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] enabled)
Processor #12 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x09] enabled)
Processor #9 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0f] enabled)
Processor #15 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0b] enabled)
Processor #11 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0d] enabled)
Processor #13 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec85000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec85000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec85800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec85800, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec86000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec86000, GSI 72-95
ACPI: IOAPIC (id[0x0c] address[0xfec86800] gsi_base[96])
IOAPIC[4]: apic_id 12, version 32, address 0xfec86800, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7fc00000:803a0000)
Built 1 zonelists
Kernel command line: root=/dev/sda8 vga=0x31a video=vesafb:mtrr:3 splash=verbose noresume
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3391.586 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1d14000 - 0x5d14000
Nosave address range: 000000000009f000 - 0000000000100000
Nosave address range: 000000007f89c000 - 000000007f912000
Nosave address range: 000000007f939000 - 000000007f93a000
Nosave address range: 000000007f944000 - 000000007f977000
Nosave address range: 000000007f977000 - 000000007f9f8000
Nosave address range: 000000007f9f8000 - 000000007fa12000
Nosave address range: 000000007fa6b000 - 000000007fa92000
Nosave address range: 000000007fb06000 - 000000007fb12000
Nosave address range: 000000007fb18000 - 000000007fb32000
Nosave address range: 000000007fb32000 - 000000007fb33000
Nosave address range: 000000007fb7a000 - 000000007fbfa000
Nosave address range: 000000007fc00000 - 00000000fffa0000
Nosave address range: 00000000fffa0000 - 00000000fffac000
Nosave address range: 00000000fffac000 - 0000000100000000
Memory: 8152836k/10485760k available (1776k kernel code, 229164k reserved, 742k data, 196k init)
Calibrating delay using timer specific routine.. 6797.41 BogoMIPS (lpj=13594831)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
checking if image is initramfs... it is
Freeing initrd memory: 3008k freed
not found!
Using local APIC timer interrupts.
result 12469023
Detected 12.469 MHz APIC timer.
Booting processor 1/16 APIC 0x8
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.69 BogoMIPS (lpj=13567385)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 2/16 APIC 0xe
Initializing CPU#2
Calibrating delay using timer specific routine.. 6783.52 BogoMIPS (lpj=13567050)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 3/16 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 6783.63 BogoMIPS (lpj=13567278)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 4/16 APIC 0xa
Initializing CPU#4
Calibrating delay using timer specific routine.. 6783.66 BogoMIPS (lpj=13567329)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU4: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 5/16 APIC 0xc
Initializing CPU#5
Calibrating delay using timer specific routine.. 6783.58 BogoMIPS (lpj=13567179)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU5: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 6/16 APIC 0x2
Initializing CPU#6
Calibrating delay using timer specific routine.. 6783.61 BogoMIPS (lpj=13567239)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU6: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 7/16 APIC 0x4
Initializing CPU#7
Calibrating delay using timer specific routine.. 6783.54 BogoMIPS (lpj=13567091)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU7: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 8/16 APIC 0x9
Initializing CPU#8
Calibrating delay using timer specific routine.. 6783.73 BogoMIPS (lpj=13567475)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 9/16 APIC 0xf
Initializing CPU#9
Calibrating delay using timer specific routine.. 6783.68 BogoMIPS (lpj=13567375)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
CPU9: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 10/16 APIC 0x1
Initializing CPU#10
Calibrating delay using timer specific routine.. 6783.75 BogoMIPS (lpj=13567500)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU10: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 11/16 APIC 0x7
Initializing CPU#11
Calibrating delay using timer specific routine.. 6783.65 BogoMIPS (lpj=13567318)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU11: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 12/16 APIC 0xb
Initializing CPU#12
Calibrating delay using timer specific routine.. 6783.82 BogoMIPS (lpj=13567640)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
CPU12: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 13/16 APIC 0xd
Initializing CPU#13
Calibrating delay using timer specific routine.. 6783.60 BogoMIPS (lpj=13567203)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU13: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 14/16 APIC 0x3
Initializing CPU#14
Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=13567439)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU14: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Booting processor 15/16 APIC 0x5
Initializing CPU#15
Calibrating delay using timer specific routine.. 6783.73 BogoMIPS (lpj=13567465)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 16384K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU15: Thermal monitoring enabled (TM2)
Genuine Intel(R) CPU 3.40GHz stepping 08
Brought up 16 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
migration_cost=28,9136
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NTF_ (name not of form _Lxx or _Exx) [20060127]
ACPI Error (evgpeblk-0284): Unknown GPE method type: PNTS (name not of form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [TNB] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:10:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.TNB_.PCI7.PXHB._PRT]
ACPI: Device [M1] status [0000000c]: functional but not present; setting present
ACPI: Device [M2] status [0000000c]: functional but not present; setting present
ACPI: Device [M3] status [0000000c]: functional but not present; setting present
ACPI: Device [M4] status [0000000c]: functional but not present; setting present
ACPI: Device [M5] status [0000000c]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: ae500000-b04fffff
PREFETCH window: 98000000-9bffffff
PCI: Bridge: 0000:00:02.0
IO window: 6000-6fff
MEM window: ac500000-ae4fffff
PREFETCH window: 9c000000-9fffffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: 5000-5fff
MEM window: aa500000-ac4fffff
PREFETCH window: a0000000-a3ffffff
PCI: Bridge: 0000:00:05.0
IO window: 4000-4fff
MEM window: a8500000-aa4fffff
PREFETCH window: a4000000-a7ffffff
PCI: Bridge: 0000:0a:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0a:00.2
IO window: disabled.
MEM window: a8300000-a83fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: a8300000-a84fffff
PREFETCH window: disabled.
PCI: Failed to allocate mem resource #6:100000@a8200000 for 0000:0e:05.0
PCI: Failed to allocate mem resource #6:100000@a8200000 for 0000:0e:05.1
PCI: Bridge: 0000:0d:00.0
IO window: 3000-3fff
MEM window: a8100000-a81fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: 3000-3fff
MEM window: a8100000-a82fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: a8000000-a80fffff
PREFETCH window: 90000000-97ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:0a:00.0 to 64
PCI: Setting latency timer of device 0000:0a:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie02]
PCI: Setting latency timer of device 0000:00:05.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
vesafb: framebuffer at 0x90000000, mapped to 0xffffc20000080000, using 5120k, total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 330k
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
GSI 17 sharing vector 0x32 and IRQ 17
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00008060
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 18 sharing vector 0x3A and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 58, io base 0x00008040
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 sharing vector 0x42 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 66, io base 0x00008020
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.16.54-2007-11-14-jb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: new device found, idVendor=0424, idProduct=a700
usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 3 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
Fusion MPT base driver 3.04.06-suse
Copyright (c) 1999-2007 LSI Corporation
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
Fusion MPT SPI Host driver 3.04.06-suse
GSI 20 sharing vector 0x4A and IRQ 20
ACPI: PCI Interrupt 0000:0e:05.0[A] -> GSI 72 (level, low) -> IRQ 74
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=74
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: Beginning Domain Validation
target0:0:0: Ending Domain Validation
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 143666192 512-byte hdwr sectors (73557 MB)
sda: Write Protect is off
sda: Mode Sense: bf 00 10 08
SCSI device sda: drive cache: write back w/ FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Type: Processor ANSI SCSI revision: 02
target0:0:6: Beginning Domain Validation
target0:0:6: Ending Domain Validation
target0:0:6: asynchronous
0:0:6:0: Attached scsi generic sg1 type 3
GSI 21 sharing vector 0x52 and IRQ 21
ACPI: PCI Interrupt 0000:0e:05.1[B] -> GSI 73 (level, low) -> IRQ 82
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=82
Vendor: ESG-SHV Model: SCA HSBP M35 Rev: 1.07
Losing some ticks... checking if CPU frequency changed.
Type: Processor ANSI SCSI revision: 02
target1:0:6: Beginning Domain Validation
target1:0:6: Ending Domain Validation
target1:0:6: asynchronous
1:0:6:0: Attached scsi generic sg2 type 3
Vendor: MAXTOR Model: ATLAS10K5_73SCA Rev: JNZH
Type: Direct-Access ANSI SCSI revision: 03
target1:0:10: Beginning Domain Validation
target1:0:10: Ending Domain Validation
target1:0:10: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI (6.25 ns, offset 127)
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
SCSI device sdb: 143666192 512-byte hdwr sectors (73557 MB)
sdb: Write Protect is off
sdb: Mode Sense: bf 00 10 08
SCSI device sdb: drive cache: write back w/ FUA
sdb: sdb1 sdb2
sd 1:0:10:0: Attached scsi disk sdb
sd 1:0:10:0: Attached scsi generic sg3 type 0
usbcore: registered new driver hiddev
input: ATEN ATEN CS-1758/54 as /class/input/input1
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input2
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
usbcore: registered new driver usbhid
/home/jbeulich/cpp/kernel/sle10sp2-2007-11-14/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac7
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x8080 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
scsi2 : ata_piix
ata1.00: ATAPI, max UDMA/33
ata1.00: configured for UDMA/33
scsi3 : ata_piix
ATA: abnormal status 0x7F on port 0x177
Vendor: QSI Model: DVD-ROM SDR-083 Rev: MX13
Type: CD-ROM ANSI SCSI revision: 05
2:0:0:0: Attached scsi generic sg4 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
Adding 4200956k swap on /dev/sdb1. Priority:-1 extents:1 across:4200956k
Fusion MPT misc device (ioctl) driver 3.04.06-suse
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
tg3.c:v3.71b (December 15, 2006)
GSI 22 sharing vector 0x5A and IRQ 22
ACPI: PCI Interrupt 0000:0c:02.0[A] -> GSI 48 (level, low) -> IRQ 90
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
eth0: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:45
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 23 sharing vector 0x62 and IRQ 23
ACPI: PCI Interrupt 0000:0c:02.1[B] -> GSI 49 (level, low) -> IRQ 98
GSI 24 sharing vector 0x6A and IRQ 24
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 106
hw_random: RNG not detected
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 106, io mem 0xb0500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.16.54-2007-11-14-jb ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
eth1: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0e:0c:43:43:46
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
usb 3-1: USB disconnect, address 2
shpchp: HPC vendor_id 8086 device_id 329 ss_vid 0 ss_did 0
ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 47 (level, low) -> IRQ 169
usb 4-3: new high speed USB device using ehci_hcd and address 2
usb 4-3: new device found, idVendor=0424, idProduct=a700
usb 4-3: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 4-3: configuration #1 chosen from 1 choice
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 3 ports detected
shpchp: Can't get msi for the hotplug controller
shpchp: Use INTx for the hotplug controller
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
eth0 renamed to eth3
eth1 renamed to eth2
usb 2-1: USB disconnect, address 2
usb 3-1: new low speed USB device using uhci_hcd and address 3
usb 3-1: new device found, idVendor=0557, idProduct=2220
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: ATEN CS-1758/54
usb 3-1: Manufacturer: ATEN
usb 3-1: configuration #1 chosen from 1 choice
input: ATEN ATEN CS-1758/54 as /class/input/input3
input: USB HID v1.10 Keyboard [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
input: ATEN ATEN CS-1758/54 as /class/input/input4
input: USB HID v1.10 Mouse [ATEN ATEN CS-1758/54] on usb-0000:00:1d.2-1
loop: loaded (max 8 devices)
ReiserFS: sda9: found reiserfs format "3.6" with standard journal
ReiserFS: sda9: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda9: checking transaction log (sda9)
ReiserFS: sda9: Using r5 hash to sort names
ReiserFS: sda10: found reiserfs format "3.6" with standard journal
ReiserFS: sda10: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda10: checking transaction log (sda10)
ReiserFS: sda10: Using r5 hash to sort names
ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
ReiserFS: sdb2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sdb2: checking transaction log (sdb2)
ReiserFS: sdb2: Using r5 hash to sort names
ReiserFS: sda5: found reiserfs format "3.6" with standard journal
ReiserFS: sda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda5: checking transaction log (sda5)
ReiserFS: sda5: Using r5 hash to sort names
ReiserFS: sda6: found reiserfs format "3.6" with standard journal
ReiserFS: sda6: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda6: checking transaction log (sda6)
ReiserFS: sda6: Using r5 hash to sort names
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
ACPI: Power Button (FF) [PWRF]
tg3: eth3: Link is up at 100 Mbps, half duplex.
tg3: eth3: Flow control is off for TX and off for RX.
IA-32 Microcode Update Driver: v1.14b <tigran@veritas.com>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6 over IPv4 tunneling driver
IA-32 Microcode Update Driver v1.14b unregistered
acpi-cpufreq: CPU0 - ACPI performance management activated.
acpi-cpufreq: CPU1 - ACPI performance management activated.
acpi-cpufreq: CPU2 - ACPI performance management activated.
acpi-cpufreq: CPU3 - ACPI performance management activated.
acpi-cpufreq: CPU4 - ACPI performance management activated.
acpi-cpufreq: CPU5 - ACPI performance management activated.
acpi-cpufreq: CPU6 - ACPI performance management activated.
acpi-cpufreq: CPU7 - ACPI performance management activated.
acpi-cpufreq: CPU8 - ACPI performance management activated.
acpi-cpufreq: CPU9 - ACPI performance management activated.
acpi-cpufreq: CPU10 - ACPI performance management activated.
acpi-cpufreq: CPU11 - ACPI performance management activated.
acpi-cpufreq: CPU12 - ACPI performance management activated.
acpi-cpufreq: CPU13 - ACPI performance management activated.
acpi-cpufreq: CPU14 - ACPI performance management activated.
acpi-cpufreq: CPU15 - ACPI performance management activated.
eth3: no IPv6 routers present
next prev parent reply other threads:[~2007-11-27 9:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4742CB2C.76E4.0078.0@novell.com>
[not found] ` <20071120174945.GA6024@us.ibm.com>
[not found] ` <47440D1F.76E4.0078.0@novell.com>
2007-11-26 21:59 ` Avoid creating P2P prefetch window for expansion ROMs Gary Hade
2007-11-26 22:15 ` Greg KH
2007-11-26 22:46 ` Gary Hade
2007-12-12 1:08 ` Gary Hade
2007-11-27 9:28 ` Jan Beulich [this message]
2007-11-27 19:17 ` Gary Hade
2007-11-20 10:49 Jan Beulich
2007-11-20 23:14 ` Greg KH
2007-11-21 8:53 ` Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=474BF149.76E4.0078.0@novell.com \
--to=jbeulich@novell.com \
--cc=garyhade@us.ibm.com \
--cc=gregkh@suse.de \
--cc=lcm@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.