From: "Richard W.M. Jones" <rjones@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH] [repost] Collecting block device statistics (v2)
Date: Tue, 27 Nov 2007 11:36:34 +0000 [thread overview]
Message-ID: <474C0142.9030200@redhat.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 919 bytes --]
This is an updated patch for collecting block device statistics. Thanks
to several people on #qemu channel for giving me feedback about the
first version[1].
This patch collects per-block-device statistics and allows them to be
displayed in the monitor through a 'info blockstats' command. It
generalises the VMDK-only support for this which was added to KVM's
version of QEMU.
Screenshot showing 'info blockstats' command being run for a Solaris
guest which is doing some moderate disk activity:
http://www.annexia.org/tmp/Screenshot-QEMU-2.png
Rich.
[1] Previous patch was:
http://lists.gnu.org/archive/html/qemu-devel/2007-11/msg00489.html
--
Emerging Technologies, Red Hat - http://et.redhat.com/~rjones/
Registered Address: Red Hat UK Ltd, Amberley Place, 107-111 Peascod
Street, Windsor, Berkshire, SL4 1TE, United Kingdom. Registered in
England and Wales under Company Registration No. 03798903
[-- Attachment #1.2: qemu-blockstats-2.patch --]
[-- Type: text/x-patch, Size: 4581 bytes --]
Index: block.c
===================================================================
RCS file: /sources/qemu/qemu/block.c,v
retrieving revision 1.49
diff -u -r1.49 block.c
--- block.c 18 Nov 2007 01:44:35 -0000 1.49
+++ block.c 27 Nov 2007 11:33:04 -0000
@@ -521,8 +521,11 @@
return ret;
else if (ret != len)
return -EINVAL;
- else
+ else {
+ bs->rd_bytes += (unsigned) len;
+ bs->rd_ops ++;
return 0;
+ }
} else {
return drv->bdrv_read(bs, sector_num, buf, nb_sectors);
}
@@ -553,8 +556,11 @@
return ret;
else if (ret != len)
return -EIO;
- else
+ else {
+ bs->wr_bytes += (unsigned) len;
+ bs->wr_ops ++;
return 0;
+ }
} else {
return drv->bdrv_write(bs, sector_num, buf, nb_sectors);
}
@@ -902,6 +908,24 @@
term_printf("\n");
}
}
+
+/* The "info blockstats" command. */
+void bdrv_info_stats (void)
+{
+ BlockDriverState *bs;
+
+ for (bs = bdrv_first; bs != NULL; bs = bs->next) {
+ term_printf ("%s:"
+ " rd_bytes=%" PRIu64
+ " wr_bytes=%" PRIu64
+ " rd_operations=%" PRIu64
+ " wr_operations=%" PRIu64
+ "\n",
+ bs->device_name,
+ bs->rd_bytes, bs->wr_bytes,
+ bs->rd_ops, bs->wr_ops);
+ }
+}
#endif
void bdrv_get_backing_filename(BlockDriverState *bs,
@@ -1064,6 +1088,7 @@
BlockDriverCompletionFunc *cb, void *opaque)
{
BlockDriver *drv = bs->drv;
+ BlockDriverAIOCB *ret;
if (!drv)
return NULL;
@@ -1076,7 +1101,15 @@
buf += 512;
}
- return drv->bdrv_aio_read(bs, sector_num, buf, nb_sectors, cb, opaque);
+ ret = drv->bdrv_aio_read(bs, sector_num, buf, nb_sectors, cb, opaque);
+
+ if (ret) {
+ /* Update stats even though technically transfer has not happened. */
+ bs->rd_bytes += (unsigned) nb_sectors * SECTOR_SIZE;
+ bs->rd_ops ++;
+ }
+
+ return ret;
}
BlockDriverAIOCB *bdrv_aio_write(BlockDriverState *bs, int64_t sector_num,
@@ -1084,6 +1117,7 @@
BlockDriverCompletionFunc *cb, void *opaque)
{
BlockDriver *drv = bs->drv;
+ BlockDriverAIOCB *ret;
if (!drv)
return NULL;
@@ -1093,7 +1127,15 @@
memcpy(bs->boot_sector_data, buf, 512);
}
- return drv->bdrv_aio_write(bs, sector_num, buf, nb_sectors, cb, opaque);
+ ret = drv->bdrv_aio_write(bs, sector_num, buf, nb_sectors, cb, opaque);
+
+ if (ret) {
+ /* Update stats even though technically transfer has not happened. */
+ bs->wr_bytes += (unsigned) nb_sectors * SECTOR_SIZE;
+ bs->wr_ops ++;
+ }
+
+ return ret;
}
void bdrv_aio_cancel(BlockDriverAIOCB *acb)
Index: block.h
===================================================================
RCS file: /sources/qemu/qemu/block.h,v
retrieving revision 1.2
diff -u -r1.2 block.h
--- block.h 17 Nov 2007 17:14:37 -0000 1.2
+++ block.h 27 Nov 2007 11:33:04 -0000
@@ -47,6 +47,7 @@
#ifndef QEMU_IMG
void bdrv_info(void);
+void bdrv_info_stats(void);
#endif
void bdrv_init(void);
Index: block_int.h
===================================================================
RCS file: /sources/qemu/qemu/block_int.h,v
retrieving revision 1.14
diff -u -r1.14 block_int.h
--- block_int.h 11 Nov 2007 02:51:16 -0000 1.14
+++ block_int.h 27 Nov 2007 11:33:04 -0000
@@ -114,6 +114,12 @@
void *sync_aiocb;
+ /* I/O stats (display with "info blockstats"). */
+ uint64_t rd_bytes;
+ uint64_t wr_bytes;
+ uint64_t rd_ops;
+ uint64_t wr_ops;
+
/* NOTE: the following infos are only hints for real hardware
drivers. They are not used by the block driver */
int cyls, heads, secs, translation;
Index: monitor.c
===================================================================
RCS file: /sources/qemu/qemu/monitor.c,v
retrieving revision 1.87
diff -u -r1.87 monitor.c
--- monitor.c 18 Nov 2007 01:44:35 -0000 1.87
+++ monitor.c 27 Nov 2007 11:33:05 -0000
@@ -260,6 +260,11 @@
bdrv_info();
}
+static void do_info_blockstats(void)
+{
+ bdrv_info_stats();
+}
+
/* get the current CPU defined by the user */
static int mon_set_cpu(int cpu_index)
{
@@ -1332,6 +1337,8 @@
"", "show the network state" },
{ "block", "", do_info_block,
"", "show the block devices" },
+ { "blockstats", "", do_info_blockstats,
+ "", "show block device statistics" },
{ "registers", "", do_info_registers,
"", "show the cpu registers" },
{ "cpus", "", do_info_cpus,
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3237 bytes --]
reply other threads:[~2007-11-27 11:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=474C0142.9030200@redhat.com \
--to=rjones@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.