From: Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
To: YAMAMOTO Takashi <yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org>
Cc: containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org,
minoura-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org
Subject: Re: [PATCH] memory.swappiness
Date: Mon, 03 Dec 2007 08:55:30 +0530 [thread overview]
Message-ID: <4753772A.2070609@linux.vnet.ibm.com> (raw)
In-Reply-To: <20071203025416.A55761D08F0-Pcsii4f/SVk@public.gmane.org>
YAMAMOTO Takashi wrote:
> here's a trivial patch to implement memory.swappiness,
> which controls swappiness for cgroup memory reclamation.
>
> it's against 2.6.24-rc3-mm2.
>
> YAMAMOTO Takashi
>
>
> Signed-off-by: YAMAMOTO Takashi <yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org>
> ---
>
> --- linux-2.6.24-rc3-mm2-swappiness/include/linux/memcontrol.h.BACKUP 2007-12-03 11:49:27.176669111 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/include/linux/memcontrol.h 2007-12-03 10:00:29.049448425 +0900
> @@ -46,6 +46,7 @@ extern void mem_cgroup_out_of_memory(str
> extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
> gfp_t gfp_mask);
> int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
> +extern int mem_cgroup_swappiness(struct mem_cgroup *mem);
>
> static inline struct mem_cgroup *mm_cgroup(const struct mm_struct *mm)
> {
> --- linux-2.6.24-rc3-mm2-swappiness/mm/vmscan.c.BACKUP 2007-12-03 07:49:00.000000000 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/mm/vmscan.c 2007-12-03 10:01:57.559803379 +0900
> @@ -1030,7 +1030,7 @@ static int calc_reclaim_mapped(struct sc
> *
> * Max temporary value is vm_total_pages*100.
> */
> - imbalance *= (vm_swappiness + 1);
> + imbalance *= (sc->swappiness + 1);
> imbalance /= 100;
>
> /*
> @@ -1445,7 +1445,7 @@ unsigned long try_to_free_mem_cgroup_pag
> .may_writepage = !laptop_mode,
> .may_swap = 1,
> .swap_cluster_max = SWAP_CLUSTER_MAX,
> - .swappiness = vm_swappiness,
> + .swappiness = mem_cgroup_swappiness(mem_cont),
> .order = 0,
> .mem_cgroup = mem_cont,
> .isolate_pages = mem_cgroup_isolate_pages,
> --- linux-2.6.24-rc3-mm2-swappiness/mm/memcontrol.c.BACKUP 2007-12-03 07:49:00.000000000 +0900
> +++ linux-2.6.24-rc3-mm2-swappiness/mm/memcontrol.c 2007-12-03 11:22:40.157163781 +0900
> @@ -133,6 +133,7 @@ struct mem_cgroup {
>
> unsigned long control_type; /* control RSS or RSS+Pagecache */
> int prev_priority; /* for recording reclaim priority */
> + unsigned int swappiness; /* swappiness */
> /*
> * statistics.
> */
> @@ -1077,7 +1078,23 @@ static int mem_control_stat_open(struct
> return single_open(file, mem_control_stat_show, cont);
> }
>
> +static int mem_cgroup_swappiness_write(struct cgroup *cont, struct cftype *cft,
> + u64 val)
> +{
> + struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
> +
> + if (val > 100)
> + return -EINVAL;
> + mem->swappiness = val;
> + return 0;
> +}
> +
> +static u64 mem_cgroup_swappiness_read(struct cgroup *cont, struct cftype *cft)
> +{
> + struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
>
> + return mem->swappiness;
> +}
>
> static struct cftype mem_cgroup_files[] = {
> {
> @@ -1110,8 +1127,21 @@ static struct cftype mem_cgroup_files[]
> .name = "stat",
> .open = mem_control_stat_open,
> },
> + {
> + .name = "swappiness",
> + .write_uint = mem_cgroup_swappiness_write,
> + .read_uint = mem_cgroup_swappiness_read,
> + },
> };
>
> +/* XXX probably it's better to move try_to_free_mem_cgroup_pages to
> + memcontrol.c and kill this */
> +int mem_cgroup_swappiness(struct mem_cgroup *mem)
> +{
> +
> + return mem->swappiness;
> +}
> +
> static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
> {
> struct mem_cgroup_per_node *pn;
> @@ -1155,6 +1185,8 @@ mem_cgroup_create(struct cgroup_subsys *
> res_counter_init(&mem->res);
>
> mem->control_type = MEM_CGROUP_TYPE_ALL;
> + mem->swappiness = 60; /* XXX probably should inherit a value from
> + either parent cgroup or global vm_swappiness */
I prefer inheriting from the parent, but since our hierarchy support
needs work (changes to res_counter to support actual hierarchies), I
would prefer using global vm_swappiness.
> memset(&mem->info, 0, sizeof(mem->info));
>
> for_each_node_state(node, N_POSSIBLE)
I like this patch very much
Acked-by: Balbir Singh <balbir-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
--
Warm Regards,
Balbir Singh
Linux Technology Center
IBM, ISTL
prev parent reply other threads:[~2007-12-03 3:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-12-03 2:54 [PATCH] memory.swappiness YAMAMOTO Takashi
[not found] ` <20071203025416.A55761D08F0-Pcsii4f/SVk@public.gmane.org>
2007-12-03 3:25 ` Balbir Singh [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4753772A.2070609@linux.vnet.ibm.com \
--to=balbir-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public.gmane.org \
--cc=containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org \
--cc=minoura-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org \
--cc=yamamoto-jCdQPDEk3idL9jVzuh4AOg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.