From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Paulus Subject: Re: sata_sil issue on 2.6.22 Date: Wed, 05 Dec 2007 07:29:06 -0700 Message-ID: <4756B5B2.1010302@verizonbusiness.com> References: <47434526.7010304@verizonbusiness.com> <474CC29E.8020102@gmail.com> <475032AF.6090001@verizonbusiness.com> <4754C15C.1020107@gmail.com> Reply-To: mark.paulus@verizonbusiness.com Mime-Version: 1.0 Content-Type: multipart/mixed; boundary=------------020806060106060300070202 Return-path: Received: from pmesmtp03.mci.com ([199.249.20.32]:50372 "EHLO pmesmtp03.mci.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751478AbXLEO3D (ORCPT ); Wed, 5 Dec 2007 09:29:03 -0500 Received: from pmismtp06.wcomnet.com ([166.37.158.166]) by firewall.verizonbusiness.com (Iplanet MTA 5.2) with ESMTP id <0JSK001JAYWA0D@firewall.verizonbusiness.com> for linux-ide@vger.kernel.org; Wed, 05 Dec 2007 14:28:58 +0000 (GMT) Received: from pmismtp06.wcomnet.com ([127.0.0.1]) by pmismtp06.mcilink.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005)) with SMTP id <0JSK00CE9YWA1V@pmismtp06.mcilink.com> for linux-ide@vger.kernel.org; Wed, 05 Dec 2007 14:28:58 +0000 (GMT) Received: from [127.0.0.1] ([166.34.133.85]) by pmismtp06.mcilink.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005)) with ESMTP id <0JSK00B92YW83P@pmismtp06.mcilink.com> for linux-ide@vger.kernel.org; Wed, 05 Dec 2007 14:28:58 +0000 (GMT) In-reply-to: <4754C15C.1020107@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org This is a multi-part message in MIME format. --------------020806060106060300070202 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Well, I feel foolish. One problem is that the prebuilt kernel is using an initrd image, so I made your patch changes, and put them into /lib/modules/`uname -r`/kernel/drivers/ata/sata_sil.ko, and guess what, they never got loaded. Foolishness on my part. Anyway, this time I got to the single boot prompt, where I did a 'rmmod sata_sil', and a 'modprobe sata_sil', and I know it loaded the new version, because you can see the 'sata_sil 0000:02:0b.0: version 2.2b', which I put in to verify what the heck is going on. This machine is pretty slow to compile the kernel, which is why I was trying to short cut the build/install some, but I might try to build the kernel on a faster machine and see if I can get the initrd image rebuilt also. Tejun Heo wrote: > Mark Paulus wrote: >> I applied the patch, and not much difference. Still the same issue, and >> here >> is the new dmesg output. > > Weird, okay, here's updated patch. Please try this one and report the > dmesg. FYI, it won't fix the problem. It's just to find out what's > going on. > > -- Mark Paulus 2424 Garden of the Gods Rd | Phone: v622-5578 / 719-535-5578 0419/117 - LEC Access ; D5-1010 | FAX: 719-535-1665 Colo Springs, CO 80919 | 1800PageMCI / 1406052 AIM : mgpaulus1 / sametime : mark.paulus --------------020806060106060300070202 Content-Type: text/plain; name="dmesg.bad4" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.bad4" Linux version 2.6.22-3-686 (Debian 2.6.22-5~bpo.1) (norbert@tretkowski.de) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Oct 31 16:15:58 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (usable) BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 000f9bf0 Entering add_active_range(0, 0, 131072) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131072 HighMem 131072 -> 131072 early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125984 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000E0010, 0014 (r0 COMPAQ) ACPI: RSDT 000E0080, 005C (r1 COMPAQ CPQ0005 20020913 0) ACPI: FACP 000E0130, 0074 (r1 COMPAQ SOLANO 1 0) ACPI: DSDT 000E0204, 12F5 (r1 COMPAQ DSDT 1 MSFT 100000D) ACPI: FACS 000E0040, 0040 ACPI: SSDT 000E14F9, 0174 (r1 COMPAQ CORE_UTL 1 MSFT 100000D) ACPI: SSDT 000E166D, 0D1C (r1 COMPAQ VILLTBL1 1 MSFT 100000D) ACPI: SSDT 000E33B3, 005D (r1 COMPAQ FHUB 1 MSFT 100000D) ACPI: APIC 000E01A4, 0060 (r1 COMPAQ SOLANO 1 0) ACPI: SSDT 000E333D, 0076 (r1 COMPAQ APIC 1 MSFT 100000D) ACPI: SSDT 000E2389, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D) ACPI: SSDT 000E2A94, 01A4 (r1 COMPAQ S3 1 MSFT 100000D) ACPI: SSDT 000E2C38, 0158 (r1 COMPAQ PIDETM 1 MSFT 100000D) ACPI: SSDT 000E2EED, 010B (r1 COMPAQ GTF0 1 MSFT 100000D) ACPI: SSDT 000E2FF8, 0117 (r1 COMPAQ GTF1 1 MSFT 100000D) ACPI: SSDT 000E2D90, 015D (r1 COMPAQ SIDETM 1 MSFT 100000D) ACPI: SSDT 000E310F, 0117 (r1 COMPAQ GTF2 1 MSFT 100000D) ACPI: SSDT 000E349B, 004E (r1 COMPAQ FINIS 1 MSFT 100000D) ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:deea0000) Built 1 zonelists. Total pages: 130048 Kernel command line: root=/dev/hda1 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 996.822 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510088k/524288k available (1689k kernel code, 13380k reserved, 648k data, 244k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a65d7 - 0xc03487e4 ( 648 kB) .text : 0xc0100000 - 0xc02a65d7 (1689 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1995.21 BogoMIPS (lpj=3990423) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 CPU0: Intel Pentium III (Coppermine) stepping 0a Total of 1 processors activated (1995.21 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region fa00-fa3f claimed by ICH4 GPIO PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f has been reserved pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved pnp: 00:0e: ioport range 0xf860-0xf87f has been reserved pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0f: iomem range 0x100000-0x1fffffff could not be reserved pnp: 00:0f: iomem range 0xfff80000-0xffffffff could not be reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: 40000000-413fffff PREFETCH window: 41500000-4fffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 786432 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 5901k freed audit: initializing netlink socket (disabled) audit(1196838639.324:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:02:04.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Processor [CPU0] (supports 8 throttling states) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 1 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation SCSI subsystem initialized libata version 2.21 loaded. hda: Maxtor 34098H4, ATA DISK drive hdb: WDC WD200BB-00DEA0, ATA DISK drive hda: selected mode 0x45 hdb: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: COMPAQ SC-148F, ATAPI CD/DVD-ROM drive hdc: selected mode 0x22 ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17 e100: eth0: e100_probe: addr 0x41000000, irq 17, MAC addr 00:02:A5:10:5A:37 sata_sil 0000:02:0b.0: version 2.2 ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 18 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 cmd 0xe0812080 ctl 0xe081208a bmdma 0xe0812000 irq 18 ata2: SATA max UDMA/100 cmd 0xe08120c0 ctl 0xe08120ca bmdma 0xe0812008 irq 18 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: revalidation failed (errno=-5) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=4) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=3) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: revalidation failed (errno=-5) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=2) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=1) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after 5 tries, giving up ata1: EH complete ata2: SATA link down (SStatus 0 SControl 310) hda: max request size: 128KiB hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 < hda5 > hdb: max request size: 128KiB hdb: 39102336 sectors (20020 MB) w/8192KiB Cache, CHS=38792/16/63, UDMA(100) hdb: cache flushes not supported hdb: hdb1 hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0x0 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M Real Time Clock Driver v1.12ac FDC 0 is a post-1991 82077 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xf860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Intel 82802 RNG detected ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 input: PS2++ Logitech MX Mouse as /class/input/input2 intel8x0_measure_ac97_clock: measured 52055 usecs intel8x0: clocking to 41158 Adding 1642496k swap on /dev/hda5. Priority:-1 extents:1 across:1642496k EXT3 FS on hda1, internal journal ACPI: PCI interrupt for device 0000:02:0b.0 disabled sata_sil 0000:02:0b.0: version 2.2b ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 18 scsi2 : sata_sil scsi3 : sata_sil ata3: SATA max UDMA/100 cmd 0xe0886080 ctl 0xe088608a bmdma 0xe0886000 irq 18 ata4: SATA max UDMA/100 cmd 0xe08860c0 ctl 0xe08860ca bmdma 0xe0886008 irq 18 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata3.00: 19541088 sectors, multi 16: LBA ata3.00: applying bridge limits ata3.00: failed to set xfermode (err_mask=0x40) ata3: failed to recover some devices, retrying in 5 secs ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: limiting speed to UDMA/100:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: disabled ata3: EH pending after completion, repeating EH (cnt=4) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata3.00: 19541088 sectors, multi 16: LBA ata3.00: applying bridge limits ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to set xfermode (err_mask=0x40) ata3.00: limiting speed to UDMA/100:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: disabled ata3: EH pending after completion, repeating EH (cnt=3) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata3.00: 19541088 sectors, multi 16: LBA ata3.00: applying bridge limits ata3.00: failed to set xfermode (err_mask=0x40) ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to set xfermode (err_mask=0x40) ata3.00: limiting speed to UDMA/100:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to set xfermode (err_mask=0x40) ata3.00: disabled ata3: EH pending after completion, repeating EH (cnt=2) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata3.00: 19541088 sectors, multi 16: LBA ata3.00: applying bridge limits ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: limiting speed to UDMA/100:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to set xfermode (err_mask=0x40) ata3.00: disabled ata3: EH pending after completion, repeating EH (cnt=1) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata3.00: 19541088 sectors, multi 16: LBA ata3.00: applying bridge limits ata3.00: failed to set xfermode (err_mask=0x40) ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: limiting speed to UDMA/100:PIO3 ata3: failed to recover some devices, retrying in 5 secs ata3: hard resetting port ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3: XXX SATA_IRQ, serror=0x0 ata3.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata3.00: revalidation failed (errno=-5) ata3.00: disabled ata3: EH pending after 5 tries, giving up ata3: EH complete ata4: SATA link down (SStatus 0 SControl 310) --------------020806060106060300070202 Content-Type: text/x-vcard; charset=utf-8; name="mark_paulus.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="mark_paulus.vcf" begin:vcard fn:Mark Paulus n:Paulus;Mark org:MCI;Lec Interfaces / 40419 adr;dom:;;2424 Garden of the Gods Rd;Colorado Springs;CO;80919 email;internet:mark.paulus@verizonbusiness.com title:Mark Paulus tel;work:719-535-5578 tel;pager:800-pagemci / 1406052 tel;home:v622-5578 version:2.1 end:vcard --------------020806060106060300070202--